diff mbox series

[07/11] wifi: iwlwifi: mvm: Don't use deprecated register

Message ID 20221205102808.8e91eb10dc7d.I3882a2452785ef8b455d99af235e4477917bf46d@changeid
State New
Headers show
Series updates intended for v6.2 2022-12-05 | expand

Commit Message

Greenman, Gregory Dec. 5, 2022, 8:35 a.m. UTC 
From: Miri Korenblit <miriam.rachel.korenblit@intel.com>

The CSR_HW_IF_CONFIG_REG register is no longer in use from
IWL_DEVICE_FAMILY_AX210 and on.
This register uses now for CSR_CTXT_INFO_BOOT_CTRL
which has a different meaning and a different format.
Currently we're writing to the register according to
CSR_HW_IF_CONFIG_REGs format, regardless to the device family.
This causes to miss-interpretation of the register value, as it is
parsed according to CSR_CTXT_INFO_BOOT_CTRLs format for devices
families >= IWL_DEVICE_FAMILY_AX210.
Fix this by writing to the register according to the old format
only for the relevant hardware.

Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
---
 drivers/net/wireless/intel/iwlwifi/mvm/ops.c | 9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)
diff mbox series

Patch

diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/ops.c b/drivers/net/wireless/intel/iwlwifi/mvm/ops.c
index e78f5beaa2d0..ebe6d9c4ccaf 100644
--- a/drivers/net/wireless/intel/iwlwifi/mvm/ops.c
+++ b/drivers/net/wireless/intel/iwlwifi/mvm/ops.c
@@ -92,6 +92,12 @@  static void iwl_mvm_nic_config(struct iwl_op_mode *op_mode)
 	radio_cfg_dash = (phy_config & FW_PHY_CFG_RADIO_DASH) >>
 			 FW_PHY_CFG_RADIO_DASH_POS;
 
+	IWL_DEBUG_INFO(mvm, "Radio type=0x%x-0x%x-0x%x\n", radio_cfg_type,
+		       radio_cfg_step, radio_cfg_dash);
+
+	if (mvm->trans->trans_cfg->device_family >= IWL_DEVICE_FAMILY_AX210)
+		return;
+
 	/* SKU control */
 	reg_val = CSR_HW_REV_STEP_DASH(mvm->trans->hw_rev);
 
@@ -127,9 +133,6 @@  static void iwl_mvm_nic_config(struct iwl_op_mode *op_mode)
 				CSR_HW_IF_CONFIG_REG_D3_DEBUG,
 				reg_val);
 
-	IWL_DEBUG_INFO(mvm, "Radio type=0x%x-0x%x-0x%x\n", radio_cfg_type,
-		       radio_cfg_step, radio_cfg_dash);
-
 	/*
 	 * W/A : NIC is stuck in a reset state after Early PCIe power off
 	 * (PCIe power is lost before PERST# is asserted), causing ME FW