diff mbox series

[v6,2/3] arm64: dts: qcom: sm8450: add Soundwire and LPASS

Message ID 20221202152054.357316-3-krzysztof.kozlowski@linaro.org
State New
Headers show
Series arm64: dts: qcom: sm8450-hdk: add sound support | expand

Commit Message

Krzysztof Kozlowski Dec. 2, 2022, 3:20 p.m. UTC
From: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>

Add Soundwire controllers, Low Power Audio SubSystem (LPASS) devices and
LPASS pin controller.

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Co-developed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>

---

Changes since v5:
1. Use different clocks (codec@31e0000, codec@3240000).
2. Order LPASS pinctrl nodes by GPIO number.
3. Add dmic01-default-state and dmic02-default-state to LPASS pinctrl.

Changes since v4:
1. Re-order few properties between Soundwire nodes, to keep them ordered
   consistently.
2. Drop unsupported qcom,port-offset.

Changes since v3:
1. Re-order reg and sound-dai-cells.

Changes since v2:
1. Use lower-case hex.

Changes since v1:
1. Whitespace cleanups.
2. Correct include - do not use deprecated one.
---
 arch/arm64/boot/dts/qcom/sm8450.dtsi | 324 +++++++++++++++++++++++++++
 1 file changed, 324 insertions(+)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/sm8450.dtsi b/arch/arm64/boot/dts/qcom/sm8450.dtsi
index 7b63c56ff2f4..acc73caa056f 100644
--- a/arch/arm64/boot/dts/qcom/sm8450.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8450.dtsi
@@ -15,6 +15,7 @@ 
 #include <dt-bindings/interconnect/qcom,sm8450.h>
 #include <dt-bindings/soc/qcom,gpr.h>
 #include <dt-bindings/soc/qcom,rpmh-rsc.h>
+#include <dt-bindings/sound/qcom,q6dsp-lpass-ports.h>
 #include <dt-bindings/thermal/thermal.h>
 
 / {
@@ -2090,6 +2091,209 @@  compute-cb@3 {
 			};
 		};
 
+		wsa2macro: codec@31e0000 {
+			compatible = "qcom,sm8450-lpass-wsa-macro";
+			reg = <0 0x031e0000 0 0x1000>;
+			clocks = <&q6prmcc LPASS_CLK_ID_WSA2_CORE_TX_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&q6prmcc LPASS_CLK_ID_WSA2_CORE_TX_2X_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&vamacro>;
+			clock-names = "mclk", "npl", "macro", "dcodec", "fsgen";
+			assigned-clocks = <&q6prmcc LPASS_CLK_ID_WSA_CORE_TX_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+					  <&q6prmcc LPASS_CLK_ID_WSA_CORE_TX_2X_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
+			assigned-clock-rates = <19200000>, <19200000>;
+
+			#clock-cells = <0>;
+			clock-output-names = "wsa2-mclk";
+			pinctrl-names = "default";
+			pinctrl-0 = <&wsa2_swr_active>;
+			#sound-dai-cells = <1>;
+		};
+
+		/* WSA2 */
+		swr4: soundwire-controller@31f0000 {
+			compatible = "qcom,soundwire-v1.7.0";
+			reg = <0 0x031f0000 0 0x2000>;
+			interrupts = <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&wsa2macro>;
+			clock-names = "iface";
+
+			qcom,din-ports = <2>;
+			qcom,dout-ports = <6>;
+
+			qcom,ports-sinterval-low =	/bits/ 8 <0x07 0x1f 0x3f 0x07 0x1f 0x3f 0x0f 0x0f>;
+			qcom,ports-offset1 =		/bits/ 8 <0x01 0x02 0x0c 0x06 0x12 0x0d 0x07 0x0a>;
+			qcom,ports-offset2 =		/bits/ 8 <0xff 0x00 0x1f 0xff 0x00 0x1f 0x00 0x00>;
+			qcom,ports-hstart =		/bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>;
+			qcom,ports-hstop =		/bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>;
+			qcom,ports-word-length =	/bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>;
+			qcom,ports-block-pack-mode =	/bits/ 8 <0xff 0xff 0x01 0xff 0xff 0x01 0xff 0xff>;
+			qcom,ports-block-group-count =	/bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>;
+			qcom,ports-lane-control =	/bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>;
+
+			#address-cells = <2>;
+			#size-cells = <0>;
+			#sound-dai-cells = <1>;
+		};
+
+		rxmacro: codec@3200000 {
+			compatible = "qcom,sm8450-lpass-rx-macro";
+			reg = <0 0x3200000 0 0x1000>;
+			clocks = <&q6prmcc LPASS_CLK_ID_RX_CORE_TX_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&q6prmcc LPASS_CLK_ID_RX_CORE_MCLK2_2X_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&vamacro>;
+			clock-names = "mclk", "npl", "macro", "dcodec", "fsgen";
+
+			assigned-clocks = <&q6prmcc LPASS_CLK_ID_RX_CORE_TX_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+					  <&q6prmcc LPASS_CLK_ID_RX_CORE_MCLK2_2X_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
+			assigned-clock-rates = <19200000>, <19200000>;
+
+			#clock-cells = <0>;
+			clock-output-names = "mclk";
+			pinctrl-names = "default";
+			pinctrl-0 = <&rx_swr_active>;
+			#sound-dai-cells = <1>;
+		};
+
+		swr1: soundwire-controller@3210000 {
+			compatible = "qcom,soundwire-v1.7.0";
+			reg = <0 0x3210000 0 0x2000>;
+			interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&rxmacro>;
+			clock-names = "iface";
+			label = "RX";
+			qcom,din-ports = <0>;
+			qcom,dout-ports = <5>;
+
+			qcom,ports-sinterval-low =	/bits/ 8 <0x03 0x1f 0x1f 0x07 0x00>;
+			qcom,ports-offset1 =		/bits/ 8 <0x00 0x00 0x0b 0x01 0x00>;
+			qcom,ports-offset2 =		/bits/ 8 <0x00 0x00 0x0b 0x00 0x00>;
+			qcom,ports-hstart =		/bits/ 8 <0xff 0x03 0xff 0xff 0xff>;
+			qcom,ports-hstop =		/bits/ 8 <0xff 0x06 0xff 0xff 0xff>;
+			qcom,ports-word-length =	/bits/ 8 <0x01 0x07 0x04 0xff 0xff>;
+			qcom,ports-block-pack-mode =	/bits/ 8 <0xff 0x00 0x01 0xff 0xff>;
+			qcom,ports-block-group-count =	/bits/ 8 <0xff 0xff 0xff 0xff 0x00>;
+			qcom,ports-lane-control =	/bits/ 8 <0x01 0x00 0x00 0x00 0x00>;
+
+			#address-cells = <2>;
+			#size-cells = <0>;
+			#sound-dai-cells = <1>;
+		};
+
+		txmacro: codec@3220000 {
+			compatible = "qcom,sm8450-lpass-tx-macro";
+			reg = <0 0x3220000 0 0x1000>;
+			clocks = <&q6prmcc LPASS_CLK_ID_RX_CORE_TX_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&q6prmcc LPASS_CLK_ID_RX_CORE_MCLK2_2X_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&vamacro>;
+			clock-names = "mclk", "npl", "macro", "dcodec", "fsgen";
+			assigned-clocks = <&q6prmcc LPASS_CLK_ID_RX_CORE_TX_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+					  <&q6prmcc LPASS_CLK_ID_RX_CORE_MCLK2_2X_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
+			assigned-clock-rates = <19200000>, <19200000>;
+
+			#clock-cells = <0>;
+			clock-output-names = "mclk";
+			pinctrl-names = "default";
+			pinctrl-0 = <&tx_swr_active>;
+			#sound-dai-cells = <1>;
+		};
+
+		wsamacro: codec@3240000 {
+			compatible = "qcom,sm8450-lpass-wsa-macro";
+			reg = <0 0x03240000 0 0x1000>;
+			clocks = <&q6prmcc LPASS_CLK_ID_WSA_CORE_TX_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&q6prmcc LPASS_CLK_ID_WSA_CORE_TX_2X_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&vamacro>;
+			clock-names = "mclk", "npl", "macro", "dcodec", "fsgen";
+
+			assigned-clocks = <&q6prmcc LPASS_CLK_ID_WSA_CORE_TX_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+					  <&q6prmcc LPASS_CLK_ID_WSA_CORE_TX_2X_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
+			assigned-clock-rates = <19200000>, <19200000>;
+
+			#clock-cells = <0>;
+			clock-output-names = "mclk";
+			pinctrl-names = "default";
+			pinctrl-0 = <&wsa_swr_active>;
+			#sound-dai-cells = <1>;
+		};
+
+		/* WSA */
+		swr0: soundwire-controller@3250000 {
+			compatible = "qcom,soundwire-v1.7.0";
+			reg = <0 0x03250000 0 0x2000>;
+			interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&wsamacro>;
+			clock-names = "iface";
+
+			qcom,din-ports = <2>;
+			qcom,dout-ports = <6>;
+
+			qcom,ports-sinterval-low =	/bits/ 8 <0x07 0x1f 0x3f 0x07 0x1f 0x3f 0x0f 0x0f>;
+			qcom,ports-offset1 =		/bits/ 8 <0x01 0x02 0x0c 0x06 0x12 0x0d 0x07 0x0a>;
+			qcom,ports-offset2 =		/bits/ 8 <0xff 0x00 0x1f 0xff 0x00 0x1f 0x00 0x00>;
+			qcom,ports-hstart =		/bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>;
+			qcom,ports-hstop =		/bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>;
+			qcom,ports-word-length =	/bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>;
+			qcom,ports-block-pack-mode =	/bits/ 8 <0xff 0xff 0x01 0xff 0xff 0x01 0xff 0xff>;
+			qcom,ports-block-group-count =	/bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>;
+			qcom,ports-lane-control =	/bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>;
+
+			#address-cells = <2>;
+			#size-cells = <0>;
+			#sound-dai-cells = <1>;
+		};
+
+		swr2: soundwire-controller@33b0000 {
+			compatible = "qcom,soundwire-v1.7.0";
+			reg = <0 0x33b0000 0 0x2000>;
+			interrupts-extended = <&intc GIC_SPI 496 IRQ_TYPE_LEVEL_HIGH>,
+					      <&intc GIC_SPI 520 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "core", "wake";
+
+			clocks = <&vamacro>;
+			clock-names = "iface";
+			label = "TX";
+
+			qcom,din-ports = <4>;
+			qcom,dout-ports = <0>;
+			qcom,ports-sinterval-low =	/bits/ 8 <0x01 0x01 0x03 0x03>;
+			qcom,ports-offset1 =		/bits/ 8 <0x00 0x00 0x01 0x01>;
+			qcom,ports-offset2 =		/bits/ 8 <0x00 0x00 0x00 0x00>;
+			qcom,ports-hstart =		/bits/ 8 <0xff 0xff 0xff 0xff>;
+			qcom,ports-hstop =		/bits/ 8 <0xff 0xff 0xff 0xff>;
+			qcom,ports-word-length =	/bits/ 8 <0xff 0xff 0xff 0xff>;
+			qcom,ports-block-pack-mode =	/bits/ 8 <0xff 0xff 0xff 0xff>;
+			qcom,ports-block-group-count =	/bits/ 8 <0xff 0xff 0xff 0xff>;
+			qcom,ports-lane-control =	/bits/ 8 <0x01 0x02 0x00 0x00>;
+
+			#address-cells = <2>;
+			#size-cells = <0>;
+			#sound-dai-cells = <1>;
+		};
+
+		vamacro: codec@33f0000 {
+			compatible = "qcom,sm8450-lpass-va-macro";
+			reg = <0 0x033f0000 0 0x1000>;
+			clocks = <&q6prmcc LPASS_CLK_ID_TX_CORE_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&q6prmcc LPASS_CLK_ID_RX_CORE_MCLK2_2X_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
+			clock-names = "mclk", "macro", "dcodec", "npl";
+			assigned-clocks = <&q6prmcc LPASS_CLK_ID_TX_CORE_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
+			assigned-clock-rates = <19200000>;
+
+			#clock-cells = <0>;
+			clock-output-names = "fsgen";
+			#sound-dai-cells = <1>;
+		};
+
 		remoteproc_adsp: remoteproc@30000000 {
 			compatible = "qcom,sm8450-adsp-pas";
 			reg = <0 0x30000000 0 0x100>;
@@ -3023,6 +3227,123 @@  qup_uart20_default: qup-uart20-default-state {
 
 		};
 
+		lpass_tlmm: pinctrl@3440000{
+			compatible = "qcom,sm8450-lpass-lpi-pinctrl";
+			reg = <0 0x3440000 0x0 0x20000>,
+			      <0 0x34d0000 0x0 0x10000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&lpass_tlmm 0 0 23>;
+
+			clocks = <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
+			clock-names = "core", "audio";
+
+			tx_swr_active: tx-swr-active-state {
+				clk-pins {
+					pins = "gpio0";
+					function = "swr_tx_clk";
+					drive-strength = <2>;
+					slew-rate = <1>;
+					bias-disable;
+				};
+
+				data-pins {
+					pins = "gpio1", "gpio2", "gpio14";
+					function = "swr_tx_data";
+					drive-strength = <2>;
+					slew-rate = <1>;
+					bias-bus-hold;
+				};
+			};
+
+			rx_swr_active: rx-swr-active-state {
+				clk-pins {
+					pins = "gpio3";
+					function = "swr_rx_clk";
+					drive-strength = <2>;
+					slew-rate = <1>;
+					bias-disable;
+				};
+
+				data-pins {
+					pins = "gpio4", "gpio5";
+					function = "swr_rx_data";
+					drive-strength = <2>;
+					slew-rate = <1>;
+					bias-bus-hold;
+				};
+			};
+
+			dmic01_default: dmic01-default-state {
+				clk-pins {
+					pins = "gpio6";
+					function = "dmic1_clk";
+					drive-strength = <8>;
+					output-high;
+				};
+
+				data-pins {
+					pins = "gpio7";
+					function = "dmic1_data";
+					drive-strength = <8>;
+					input-enable;
+				};
+			};
+
+			dmic02_default: dmic02-default-state {
+				clk-pins {
+					pins = "gpio8";
+					function = "dmic2_clk";
+					drive-strength = <8>;
+					output-high;
+				};
+
+				data-pins {
+					pins = "gpio9";
+					function = "dmic2_data";
+					drive-strength = <8>;
+					input-enable;
+				};
+			};
+
+			wsa_swr_active: wsa-swr-active-state {
+				clk-pins {
+					pins = "gpio10";
+					function = "wsa_swr_clk";
+					drive-strength = <2>;
+					slew-rate = <1>;
+					bias-disable;
+				};
+
+				data-pins {
+					pins = "gpio11";
+					function = "wsa_swr_data";
+					drive-strength = <2>;
+					slew-rate = <1>;
+					bias-bus-hold;
+				};
+			};
+
+			wsa2_swr_active: wsa2-swr-active-state {
+				clk-pins {
+					pins = "gpio15";
+					function = "wsa2_swr_clk";
+					drive-strength = <2>;
+					slew-rate = <1>;
+					bias-disable;
+				};
+
+				data-pins {
+					pins = "gpio16";
+					function = "wsa2_swr_data";
+					drive-strength = <2>;
+					slew-rate = <1>;
+					bias-bus-hold;
+				};
+			};
+		};
+
 		apps_smmu: iommu@15000000 {
 			compatible = "qcom,sm8450-smmu-500", "arm,mmu-500";
 			reg = <0 0x15000000 0 0x100000>;
@@ -3501,6 +3822,9 @@  lpass_ag_noc: interconnect@3c40000 {
 		};
 	};
 
+	sound: sound {
+	};
+
 	thermal-zones {
 		aoss0-thermal {
 			polling-delay-passive = <0>;