| Message ID | 20221210200353.418391-6-konrad.dybcio@linaro.org |
|---|---|
| State | Accepted |
| Commit | 67fb53745e0b38275fa0b422b6a3c6c1c028c9a2 |
| Headers | show |
| Series | None | expand |
diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi index 95dc10a1deb2..616b5b1b1fb0 100644 --- a/arch/arm64/boot/dts/qcom/msm8996.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi @@ -826,9 +826,11 @@ a2noc: interconnect@583000 { compatible = "qcom,msm8996-a2noc"; reg = <0x00583000 0x7000>; #interconnect-cells = <1>; - clock-names = "bus", "bus_a"; + clock-names = "bus", "bus_a", "aggre2_ufs_axi", "ufs_axi"; clocks = <&rpmcc RPM_SMD_AGGR2_NOC_CLK>, - <&rpmcc RPM_SMD_AGGR2_NOC_A_CLK>; + <&rpmcc RPM_SMD_AGGR2_NOC_A_CLK>, + <&gcc GCC_AGGRE2_UFS_AXI_CLK>, + <&gcc GCC_UFS_AXI_CLK>; }; mnoc: interconnect@5a4000 {
On eMMC devices, the UFS clocks aren't started in the bootloader (or well, at least it should not be, as that would just leak power..), which results in platform reboots when trying to access the unclocked UFS hardware, which unfortunately happens on each and every boot, as interconnect calls sync_state and goes over each and every path. Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> --- arch/arm64/boot/dts/qcom/msm8996.dtsi | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-)