diff mbox series

[PATCH-for-8.0,v2,09/11] hw/mips/malta: Use bootloader generator API for nanoMIPS CPUs (4/5)

Message ID 20221211204533.85359-10-philmd@linaro.org
State Superseded
Headers show
Series hw/mips/malta: Generate nanoMIPS bootloader with bootloader generator API | expand

Commit Message

Philippe Mathieu-Daudé Dec. 11, 2022, 8:45 p.m. UTC
Part 4/5: Convert GT64120 ISD base address setup

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
---
 hw/mips/malta.c | 40 +++++++---------------------------------
 1 file changed, 7 insertions(+), 33 deletions(-)

Comments

Richard Henderson Dec. 12, 2022, 2:40 p.m. UTC | #1
On 12/11/22 14:45, Philippe Mathieu-Daudé wrote:
> Part 4/5: Convert GT64120 ISD base address setup
> 
> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>


r~

> ---
>   hw/mips/malta.c | 40 +++++++---------------------------------
>   1 file changed, 7 insertions(+), 33 deletions(-)
> 
> diff --git a/hw/mips/malta.c b/hw/mips/malta.c
> index 16161b1b03..451908b217 100644
> --- a/hw/mips/malta.c
> +++ b/hw/mips/malta.c
> @@ -683,46 +683,20 @@ static void write_bootloader_nanomips(uint8_t *base, uint64_t run_addr,
>       stw_p(p++, 0x80e7); stw_p(p++, NM_LO(loaderparams.ram_low_size));
>                                   /* ori a3,a3,%lo(loaderparams.ram_low_size) */
>   
> -    /*
> -     * Load BAR registers as done by YAMON:
> -     */
> -    stw_p(p++, 0xe040); stw_p(p++, 0x0681);
> -                                /* lui t1, %hi(0xb4000000)      */
> -
>   #if TARGET_BIG_ENDIAN
>   #define cpu_to_gt32 cpu_to_le32
> -
> -    stw_p(p++, 0xe020); stw_p(p++, 0x0be1);
> -                                /* lui t0, %hi(0xdf000000)      */
> -
> -    /* 0x68 corresponds to GT_ISD (from hw/mips/gt64xxx_pci.c)  */
> -    stw_p(p++, 0x8422); stw_p(p++, 0x9068);
> -                                /* sw t0, 0x68(t1)              */
> -
> -    stw_p(p++, 0xe040); stw_p(p++, 0x077d);
> -                                /* lui t1, %hi(0xbbe00000)      */
> -
> -    stw_p(p++, 0xe020); stw_p(p++, 0x0801);
> -                                /* lui t0, %hi(0xc0000000)      */
>   #else
>   #define cpu_to_gt32 cpu_to_be32
> -
> -    stw_p(p++, 0x0020); stw_p(p++, 0x00df);
> -                                /* addiu[32] t0, $0, 0xdf       */
> -
> -    /* 0x68 corresponds to GT_ISD                               */
> -    stw_p(p++, 0x8422); stw_p(p++, 0x9068);
> -                                /* sw t0, 0x68(t1)              */
> -
> -    /* Use kseg2 remapped address 0x1be00000                    */
> -    stw_p(p++, 0xe040); stw_p(p++, 0x077d);
> -                                /* lui t1, %hi(0xbbe00000)      */
> -
> -    stw_p(p++, 0x0020); stw_p(p++, 0x00c0);
> -                                /* addiu[32] t0, $0, 0xc0       */
>   #endif
>       v = p;
>   
> +    /* setup MEM-to-PCI0 mapping as done by YAMON */
> +
> +    /* move GT64120 registers from 0x14000000 to 0x1be00000 */
> +    bl_gen_write_u32(&v, /* GT_ISD */
> +                     cpu_mips_phys_to_kseg1(NULL, 0x14000000 + 0x68),
> +                     cpu_to_gt32(0x1be00000 << 3));
> +
>       /* setup PCI0 io window to 0x18000000-0x181fffff */
>       bl_gen_write_u32(&v, /* GT_PCI0IOLD */
>                        cpu_mips_phys_to_kseg1(NULL, 0x1be00000 + 0x48),
diff mbox series

Patch

diff --git a/hw/mips/malta.c b/hw/mips/malta.c
index 16161b1b03..451908b217 100644
--- a/hw/mips/malta.c
+++ b/hw/mips/malta.c
@@ -683,46 +683,20 @@  static void write_bootloader_nanomips(uint8_t *base, uint64_t run_addr,
     stw_p(p++, 0x80e7); stw_p(p++, NM_LO(loaderparams.ram_low_size));
                                 /* ori a3,a3,%lo(loaderparams.ram_low_size) */
 
-    /*
-     * Load BAR registers as done by YAMON:
-     */
-    stw_p(p++, 0xe040); stw_p(p++, 0x0681);
-                                /* lui t1, %hi(0xb4000000)      */
-
 #if TARGET_BIG_ENDIAN
 #define cpu_to_gt32 cpu_to_le32
-
-    stw_p(p++, 0xe020); stw_p(p++, 0x0be1);
-                                /* lui t0, %hi(0xdf000000)      */
-
-    /* 0x68 corresponds to GT_ISD (from hw/mips/gt64xxx_pci.c)  */
-    stw_p(p++, 0x8422); stw_p(p++, 0x9068);
-                                /* sw t0, 0x68(t1)              */
-
-    stw_p(p++, 0xe040); stw_p(p++, 0x077d);
-                                /* lui t1, %hi(0xbbe00000)      */
-
-    stw_p(p++, 0xe020); stw_p(p++, 0x0801);
-                                /* lui t0, %hi(0xc0000000)      */
 #else
 #define cpu_to_gt32 cpu_to_be32
-
-    stw_p(p++, 0x0020); stw_p(p++, 0x00df);
-                                /* addiu[32] t0, $0, 0xdf       */
-
-    /* 0x68 corresponds to GT_ISD                               */
-    stw_p(p++, 0x8422); stw_p(p++, 0x9068);
-                                /* sw t0, 0x68(t1)              */
-
-    /* Use kseg2 remapped address 0x1be00000                    */
-    stw_p(p++, 0xe040); stw_p(p++, 0x077d);
-                                /* lui t1, %hi(0xbbe00000)      */
-
-    stw_p(p++, 0x0020); stw_p(p++, 0x00c0);
-                                /* addiu[32] t0, $0, 0xc0       */
 #endif
     v = p;
 
+    /* setup MEM-to-PCI0 mapping as done by YAMON */
+
+    /* move GT64120 registers from 0x14000000 to 0x1be00000 */
+    bl_gen_write_u32(&v, /* GT_ISD */
+                     cpu_mips_phys_to_kseg1(NULL, 0x14000000 + 0x68),
+                     cpu_to_gt32(0x1be00000 << 3));
+
     /* setup PCI0 io window to 0x18000000-0x181fffff */
     bl_gen_write_u32(&v, /* GT_PCI0IOLD */
                      cpu_mips_phys_to_kseg1(NULL, 0x1be00000 + 0x48),