| Message ID | 20221213123823.455731-2-bhupesh.sharma@linaro.org |
|---|---|
| State | Superseded |
| Headers | show |
| Series | arm64: dts: sm6115: Add USB SS qmp phy node and perform some cleanups | expand |
On 13/12/2022 13:38, Bhupesh Sharma wrote: > There is only one USB controller present on SM6115 / SM4250 > Qualcomm SoC, so drop the numbering used with USB nodes The node names remain unaffected, so please mention you do it only for the labels. Labels do not matter for the code, has no impact. > in the dtsi and the related sm4250-oneplus-billie2.dts. > > Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org> > --- > arch/arm64/boot/dts/qcom/sm4250-oneplus-billie2.dts | 4 ++-- > arch/arm64/boot/dts/qcom/sm6115.dtsi | 8 ++++---- > 2 files changed, 6 insertions(+), 6 deletions(-) > > diff --git a/arch/arm64/boot/dts/qcom/sm4250-oneplus-billie2.dts b/arch/arm64/boot/dts/qcom/sm4250-oneplus-billie2.dts > index a3f1c7c41fd73..fa57f4bf58256 100644 > --- a/arch/arm64/boot/dts/qcom/sm4250-oneplus-billie2.dts > +++ b/arch/arm64/boot/dts/qcom/sm4250-oneplus-billie2.dts > @@ -225,11 +225,11 @@ &ufs_mem_phy { > status = "okay"; > }; > > -&usb_1 { > +&usb { > status = "okay"; > }; Best regards, Krzysztof
diff --git a/arch/arm64/boot/dts/qcom/sm4250-oneplus-billie2.dts b/arch/arm64/boot/dts/qcom/sm4250-oneplus-billie2.dts index a3f1c7c41fd73..fa57f4bf58256 100644 --- a/arch/arm64/boot/dts/qcom/sm4250-oneplus-billie2.dts +++ b/arch/arm64/boot/dts/qcom/sm4250-oneplus-billie2.dts @@ -225,11 +225,11 @@ &ufs_mem_phy { status = "okay"; }; -&usb_1 { +&usb { status = "okay"; }; -&usb_1_hsphy { +&usb_hsphy { vdd-supply = <&vreg_l4a>; vdda-pll-supply = <&vreg_l12a>; vdda-phy-dpdm-supply = <&vreg_l15a>; diff --git a/arch/arm64/boot/dts/qcom/sm6115.dtsi b/arch/arm64/boot/dts/qcom/sm6115.dtsi index 572bf04adf906..b5f7480c2e713 100644 --- a/arch/arm64/boot/dts/qcom/sm6115.dtsi +++ b/arch/arm64/boot/dts/qcom/sm6115.dtsi @@ -565,7 +565,7 @@ gcc: clock-controller@1400000 { #power-domain-cells = <1>; }; - usb_1_hsphy: phy@1613000 { + usb_hsphy: phy@1613000 { compatible = "qcom,sm6115-qusb2-phy"; reg = <0x01613000 0x180>; #phy-cells = <0>; @@ -991,7 +991,7 @@ spi5: spi@4a94000 { }; }; - usb_1: usb@4ef8800 { + usb: usb@4ef8800 { compatible = "qcom,sm6115-dwc3", "qcom,dwc3"; reg = <0x04ef8800 0x400>; #address-cells = <1>; @@ -1019,11 +1019,11 @@ usb_1: usb@4ef8800 { qcom,select-utmi-as-pipe-clk; status = "disabled"; - usb_1_dwc3: usb@4e00000 { + usb_dwc3: usb@4e00000 { compatible = "snps,dwc3"; reg = <0x04e00000 0xcd00>; interrupts = <GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>; - phys = <&usb_1_hsphy>; + phys = <&usb_hsphy>; phy-names = "usb2-phy"; iommus = <&apps_smmu 0x120 0x0>; snps,dis_u2_susphy_quirk;
There is only one USB controller present on SM6115 / SM4250 Qualcomm SoC, so drop the numbering used with USB nodes in the dtsi and the related sm4250-oneplus-billie2.dts. Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org> --- arch/arm64/boot/dts/qcom/sm4250-oneplus-billie2.dts | 4 ++-- arch/arm64/boot/dts/qcom/sm6115.dtsi | 8 ++++---- 2 files changed, 6 insertions(+), 6 deletions(-)