diff mbox series

[06/12] dt-bindings: watchdog: qcom-wdt: merge MSM timer

Message ID 20221212163532.142533-6-krzysztof.kozlowski@linaro.org
State Accepted
Commit 733318534849044089de8c818a2fb1c67fa39bd1
Headers show
Series [01/12] dt-bindings: watchdog: qcom-wdt: require fallback for IPQ4019 | expand

Commit Message

Krzysztof Kozlowski Dec. 12, 2022, 4:35 p.m. UTC
Merge Qualcomm MSM timer bindings into watchdog, because the timer
compatibles are already included here and the hardware is quite similar.

While converting the MSM timer bindings, adjust clock-frequency
property to take only one frequency, instead of two, because:
1. DT schema does not allow to frequencies,
2. The Linux timer driver reads only first frequency.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 .../bindings/timer/qcom,msm-timer.txt         | 47 ------------------
 .../bindings/watchdog/qcom-wdt.yaml           | 49 +++++++++++++++++++
 2 files changed, 49 insertions(+), 47 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/timer/qcom,msm-timer.txt

Comments

Guenter Roeck Jan. 31, 2023, 5:33 p.m. UTC | #1
On Mon, Dec 12, 2022 at 05:35:26PM +0100, Krzysztof Kozlowski wrote:
> Merge Qualcomm MSM timer bindings into watchdog, because the timer
> compatibles are already included here and the hardware is quite similar.
> 
> While converting the MSM timer bindings, adjust clock-frequency
> property to take only one frequency, instead of two, because:
> 1. DT schema does not allow to frequencies,
> 2. The Linux timer driver reads only first frequency.
> 
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>

Reviewed-by: Guenter Roeck <linux@roeck-us.net>

> ---
>  .../bindings/timer/qcom,msm-timer.txt         | 47 ------------------
>  .../bindings/watchdog/qcom-wdt.yaml           | 49 +++++++++++++++++++
>  2 files changed, 49 insertions(+), 47 deletions(-)
>  delete mode 100644 Documentation/devicetree/bindings/timer/qcom,msm-timer.txt
> 
> diff --git a/Documentation/devicetree/bindings/timer/qcom,msm-timer.txt b/Documentation/devicetree/bindings/timer/qcom,msm-timer.txt
> deleted file mode 100644
> index 5e10c345548f..000000000000
> --- a/Documentation/devicetree/bindings/timer/qcom,msm-timer.txt
> +++ /dev/null
> @@ -1,47 +0,0 @@
> -* MSM Timer
> -
> -Properties:
> -
> -- compatible : Should at least contain "qcom,msm-timer". More specific
> -               properties specify which subsystem the timers are paired with.
> -
> -               "qcom,kpss-timer" - krait subsystem
> -               "qcom,scss-timer" - scorpion subsystem
> -
> -- interrupts : Interrupts for the debug timer, the first general purpose
> -               timer, and optionally a second general purpose timer, and
> -               optionally as well, 2 watchdog interrupts, in that order.
> -
> -- reg : Specifies the base address of the timer registers.
> -
> -- clocks: Reference to the parent clocks, one per output clock. The parents
> -          must appear in the same order as the clock names.
> -
> -- clock-names: The name of the clocks as free-form strings. They should be in
> -               the same order as the clocks.
> -
> -- clock-frequency : The frequency of the debug timer and the general purpose
> -                    timer(s) in Hz in that order.
> -
> -Optional:
> -
> -- cpu-offset : per-cpu offset used when the timer is accessed without the
> -               CPU remapping facilities. The offset is
> -               cpu-offset + (0x10000 * cpu-nr).
> -
> -Example:
> -
> -       timer@200a000 {
> -               compatible = "qcom,scss-timer", "qcom,msm-timer";
> -               interrupts = <1 1 0x301>,
> -                            <1 2 0x301>,
> -                            <1 3 0x301>,
> -                            <1 4 0x301>,
> -                            <1 5 0x301>;
> -               reg = <0x0200a000 0x100>;
> -               clock-frequency = <19200000>,
> -                                 <32768>;
> -               clocks = <&sleep_clk>;
> -               clock-names = "sleep";
> -               cpu-offset = <0x40000>;
> -       };
> diff --git a/Documentation/devicetree/bindings/watchdog/qcom-wdt.yaml b/Documentation/devicetree/bindings/watchdog/qcom-wdt.yaml
> index b7fc57f4800e..697caf1937cc 100644
> --- a/Documentation/devicetree/bindings/watchdog/qcom-wdt.yaml
> +++ b/Documentation/devicetree/bindings/watchdog/qcom-wdt.yaml
> @@ -10,6 +10,9 @@ maintainers:
>    - Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>
>  
>  properties:
> +  $nodename:
> +    pattern: "^(watchdog|timer)@[0-9a-f]+$"
> +
>    compatible:
>      oneOf:
>        - items:
> @@ -48,6 +51,20 @@ properties:
>    clocks:
>      maxItems: 1
>  
> +  clock-names:
> +    items:
> +      - const: sleep
> +
> +  clock-frequency:
> +    description:
> +      The frequency of the general purpose timer in Hz in that order.
> +
> +  cpu-offset:
> +    $ref: /schemas/types.yaml#/definitions/uint32
> +    description:
> +      Per-CPU offset used when the timer is accessed without the CPU remapping
> +      facilities. The offset is cpu-offset + (0x10000 * cpu-nr).
> +
>    interrupts:
>      minItems: 1
>      maxItems: 5
> @@ -67,12 +84,27 @@ allOf:
>              const: qcom,kpss-wdt
>      then:
>        properties:
> +        clock-frequency: false
> +        cpu-offset: false
>          interrupts:
>            minItems: 1
>            items:
>              - description: Bark
>              - description: Bite
>  
> +    else:
> +      properties:
> +        interrupts:
> +          minItems: 3
> +          items:
> +            - description: Debug
> +            - description: First general purpose timer
> +            - description: Second general purpose timer
> +            - description: First watchdog
> +            - description: Second watchdog
> +      required:
> +        - clock-frequency
> +
>  unevaluatedProperties: false
>  
>  examples:
> @@ -86,3 +118,20 @@ examples:
>        interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
>        timeout-sec = <10>;
>      };
> +
> +  - |
> +    #include <dt-bindings/interrupt-controller/arm-gic.h>
> +
> +    watchdog@200a000 {
> +      compatible = "qcom,kpss-wdt-ipq8064", "qcom,kpss-timer", "qcom,msm-timer";
> +      interrupts = <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_EDGE_RISING)>,
> +                   <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_EDGE_RISING)>,
> +                   <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_EDGE_RISING)>,
> +                   <GIC_PPI 4 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_EDGE_RISING)>,
> +                   <GIC_PPI 5 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_EDGE_RISING)>;
> +      reg = <0x0200a000 0x100>;
> +      clock-frequency = <25000000>;
> +      clocks = <&sleep_clk>;
> +      clock-names = "sleep";
> +      cpu-offset = <0x80000>;
> +    };
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/timer/qcom,msm-timer.txt b/Documentation/devicetree/bindings/timer/qcom,msm-timer.txt
deleted file mode 100644
index 5e10c345548f..000000000000
--- a/Documentation/devicetree/bindings/timer/qcom,msm-timer.txt
+++ /dev/null
@@ -1,47 +0,0 @@ 
-* MSM Timer
-
-Properties:
-
-- compatible : Should at least contain "qcom,msm-timer". More specific
-               properties specify which subsystem the timers are paired with.
-
-               "qcom,kpss-timer" - krait subsystem
-               "qcom,scss-timer" - scorpion subsystem
-
-- interrupts : Interrupts for the debug timer, the first general purpose
-               timer, and optionally a second general purpose timer, and
-               optionally as well, 2 watchdog interrupts, in that order.
-
-- reg : Specifies the base address of the timer registers.
-
-- clocks: Reference to the parent clocks, one per output clock. The parents
-          must appear in the same order as the clock names.
-
-- clock-names: The name of the clocks as free-form strings. They should be in
-               the same order as the clocks.
-
-- clock-frequency : The frequency of the debug timer and the general purpose
-                    timer(s) in Hz in that order.
-
-Optional:
-
-- cpu-offset : per-cpu offset used when the timer is accessed without the
-               CPU remapping facilities. The offset is
-               cpu-offset + (0x10000 * cpu-nr).
-
-Example:
-
-       timer@200a000 {
-               compatible = "qcom,scss-timer", "qcom,msm-timer";
-               interrupts = <1 1 0x301>,
-                            <1 2 0x301>,
-                            <1 3 0x301>,
-                            <1 4 0x301>,
-                            <1 5 0x301>;
-               reg = <0x0200a000 0x100>;
-               clock-frequency = <19200000>,
-                                 <32768>;
-               clocks = <&sleep_clk>;
-               clock-names = "sleep";
-               cpu-offset = <0x40000>;
-       };
diff --git a/Documentation/devicetree/bindings/watchdog/qcom-wdt.yaml b/Documentation/devicetree/bindings/watchdog/qcom-wdt.yaml
index b7fc57f4800e..697caf1937cc 100644
--- a/Documentation/devicetree/bindings/watchdog/qcom-wdt.yaml
+++ b/Documentation/devicetree/bindings/watchdog/qcom-wdt.yaml
@@ -10,6 +10,9 @@  maintainers:
   - Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>
 
 properties:
+  $nodename:
+    pattern: "^(watchdog|timer)@[0-9a-f]+$"
+
   compatible:
     oneOf:
       - items:
@@ -48,6 +51,20 @@  properties:
   clocks:
     maxItems: 1
 
+  clock-names:
+    items:
+      - const: sleep
+
+  clock-frequency:
+    description:
+      The frequency of the general purpose timer in Hz in that order.
+
+  cpu-offset:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Per-CPU offset used when the timer is accessed without the CPU remapping
+      facilities. The offset is cpu-offset + (0x10000 * cpu-nr).
+
   interrupts:
     minItems: 1
     maxItems: 5
@@ -67,12 +84,27 @@  allOf:
             const: qcom,kpss-wdt
     then:
       properties:
+        clock-frequency: false
+        cpu-offset: false
         interrupts:
           minItems: 1
           items:
             - description: Bark
             - description: Bite
 
+    else:
+      properties:
+        interrupts:
+          minItems: 3
+          items:
+            - description: Debug
+            - description: First general purpose timer
+            - description: Second general purpose timer
+            - description: First watchdog
+            - description: Second watchdog
+      required:
+        - clock-frequency
+
 unevaluatedProperties: false
 
 examples:
@@ -86,3 +118,20 @@  examples:
       interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
       timeout-sec = <10>;
     };
+
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    watchdog@200a000 {
+      compatible = "qcom,kpss-wdt-ipq8064", "qcom,kpss-timer", "qcom,msm-timer";
+      interrupts = <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_EDGE_RISING)>,
+                   <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_EDGE_RISING)>,
+                   <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_EDGE_RISING)>,
+                   <GIC_PPI 4 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_EDGE_RISING)>,
+                   <GIC_PPI 5 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_EDGE_RISING)>;
+      reg = <0x0200a000 0x100>;
+      clock-frequency = <25000000>;
+      clocks = <&sleep_clk>;
+      clock-names = "sleep";
+      cpu-offset = <0x80000>;
+    };