diff mbox series

[v2,3/3] arm64: dts: qcom: sm6115: Add USB SS qmp phy node

Message ID 20221214203124.564537-4-bhupesh.sharma@linaro.org
State New
Headers show
Series None | expand

Commit Message

Bhupesh Sharma Dec. 14, 2022, 8:31 p.m. UTC
Add USB superspeed qmp phy node to dtsi.
Make sure that the oneplus board dts (which includes the
sm4250.dtsi) continues to work as intended.

Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
---
 .../boot/dts/qcom/sm4250-oneplus-billie2.dts  |  3 ++
 arch/arm64/boot/dts/qcom/sm6115.dtsi          | 38 ++++++++++++++++++-
 2 files changed, 39 insertions(+), 2 deletions(-)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/sm4250-oneplus-billie2.dts b/arch/arm64/boot/dts/qcom/sm4250-oneplus-billie2.dts
index 3f39f25e0721e..4f0d65574448b 100644
--- a/arch/arm64/boot/dts/qcom/sm4250-oneplus-billie2.dts
+++ b/arch/arm64/boot/dts/qcom/sm4250-oneplus-billie2.dts
@@ -232,6 +232,9 @@  &usb {
 &usb_dwc3 {
 	maximum-speed = "high-speed";
 	dr_mode = "peripheral";
+
+	phys = <&usb_hsphy>;
+	phy-names = "usb2-phy";
 };
 
 &usb_hsphy {
diff --git a/arch/arm64/boot/dts/qcom/sm6115.dtsi b/arch/arm64/boot/dts/qcom/sm6115.dtsi
index e4ce135264f3d..15f311dcd289f 100644
--- a/arch/arm64/boot/dts/qcom/sm6115.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm6115.dtsi
@@ -579,6 +579,40 @@  usb_hsphy: phy@1613000 {
 			status = "disabled";
 		};
 
+		usb_qmpphy: phy@1615000 {
+			compatible = "qcom,sm6115-qmp-usb3-phy";
+			reg = <0x01615000 0x200>;
+			clocks = <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>,
+				 <&gcc GCC_USB3_PRIM_CLKREF_CLK>,
+				 <&gcc GCC_AHB2PHY_USB_CLK>;
+			clock-names = "com_aux",
+				      "ref",
+				      "cfg_ahb";
+			resets = <&gcc GCC_USB3_PHY_PRIM_SP0_BCR>,
+				 <&gcc GCC_USB3PHY_PHY_PRIM_SP0_BCR>;
+			reset-names = "phy", "phy_phy";
+			status = "disabled";
+			#clock-cells = <1>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			usb_ssphy: phy@1615200 {
+				reg = <0x01615200 0x200>,
+				      <0x01615400 0x200>,
+				      <0x01615c00 0x400>,
+				      <0x01615600 0x200>,
+				      <0x01615800 0x200>,
+				      <0x01615a00 0x100>;
+				#phy-cells = <0>;
+				#clock-cells = <1>;
+				clocks = <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>;
+				clock-names = "pipe0";
+				clock-output-names = "usb3_phy_pipe_clk_src";
+			};
+		};
+
+
 		qfprom@1b40000 {
 			compatible = "qcom,sm6115-qfprom", "qcom,qfprom";
 			reg = <0x01b40000 0x7000>;
@@ -1023,8 +1057,8 @@  usb_dwc3: usb@4e00000 {
 				compatible = "snps,dwc3";
 				reg = <0x04e00000 0xcd00>;
 				interrupts = <GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>;
-				phys = <&usb_hsphy>;
-				phy-names = "usb2-phy";
+				phys = <&usb_hsphy>, <&usb_ssphy>;
+				phy-names = "usb2-phy", "usb3-phy";
 				iommus = <&apps_smmu 0x120 0x0>;
 				snps,dis_u2_susphy_quirk;
 				snps,dis_enblslpm_quirk;