diff mbox series

[v4] regulator: dt-bindings: Convert active-semi PMIC docs to YAML schemas

Message ID 20221214155152.14349-1-paul@crapouillou.net
State Accepted
Commit 413ec72963fc297f419a3d5f931bb43921969749
Headers show
Series [v4] regulator: dt-bindings: Convert active-semi PMIC docs to YAML schemas | expand

Commit Message

Paul Cercueil Dec. 14, 2022, 3:51 p.m. UTC
Create YAML bindings for the Active-semi PMICs and remove the old text
files.

The bindings aren't perfect, for instance I couldn't find good
descriptions for the vendor properties in the "charger" node of the
ACT8945A because I am not familiar with the hardware and these
properties were not documented anywhere.

The YAML schemas are a bit different than what is described in the old
text files, because these were sometimes wrong or had missing
information. This is the case for the ACT8600 documentation, which
specified the valid node names for the regulators, while the driver was
expecting different names. This led to the current situation where we
have two different boards using different names for the regulators:
- arch/mips/boot/dts/ingenic/ci20.dts uses the names documented in the
  text file,
- arch/mips/boot/dts/ingenic/gcw0.dts uses the names that the driver
  expects.
In theory, the driver should be fixed to follow the documentation, and
accept both naming schemes. In practice though, when the PMIC node was
added to the ci20.dts board file, the names were already wrong in
regards to what the driver expected, so it never really worked
correctly and wasn't tested properly. Furthermore, in that board the
consumers of the regulators aren't working for various other reasons
(invalid GPIOs, etc.).

For that reason, for the ACT8600 bindings I decided to only use the node
names that the driver expects (and that gcw0.dts uses), instead of
accepting both old and new names. A follow-up patch will update the CI20
board to use the new regulator names.

Signed-off-by: Paul Cercueil <paul@crapouillou.net>

---
v2:
- Avoid | character in descriptions that can be single-line
- Remove unevaluatedProperties when additionalProperties is also present
- Remove useless inner parentheses in regular expressions
- Rename I2C nodes to just... i2c
- Remove node handles

v3:
- Fix alignment in examples
- Drop useless status = "okay"; in examples
- I set myself as the maintainer, which I only did because nobody else
  seems to care.

v4:
- v2/v3 changes did not update active-semi,act8865.yaml for some reason;
  so the cleanups mentioned above were applied to this file now.
- Remove description for 'reg' property

Cheers,
-Paul
---
 .../bindings/regulator/act8865-regulator.txt  | 117 --------
 .../bindings/regulator/act8945a-regulator.txt | 113 --------
 .../regulator/active-semi,act8600.yaml        | 139 ++++++++++
 .../regulator/active-semi,act8846.yaml        | 205 ++++++++++++++
 .../regulator/active-semi,act8865.yaml        | 158 +++++++++++
 .../regulator/active-semi,act8945a.yaml       | 258 ++++++++++++++++++
 6 files changed, 760 insertions(+), 230 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/regulator/act8865-regulator.txt
 delete mode 100644 Documentation/devicetree/bindings/regulator/act8945a-regulator.txt
 create mode 100644 Documentation/devicetree/bindings/regulator/active-semi,act8600.yaml
 create mode 100644 Documentation/devicetree/bindings/regulator/active-semi,act8846.yaml
 create mode 100644 Documentation/devicetree/bindings/regulator/active-semi,act8865.yaml
 create mode 100644 Documentation/devicetree/bindings/regulator/active-semi,act8945a.yaml

Comments

Mark Brown Dec. 27, 2022, 11:57 a.m. UTC | #1
On Wed, 14 Dec 2022 16:51:52 +0100, Paul Cercueil wrote:
> Create YAML bindings for the Active-semi PMICs and remove the old text
> files.
> 
> The bindings aren't perfect, for instance I couldn't find good
> descriptions for the vendor properties in the "charger" node of the
> ACT8945A because I am not familiar with the hardware and these
> properties were not documented anywhere.
> 
> [...]

Applied to

   https://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator.git for-next

Thanks!

[1/1] regulator: dt-bindings: Convert active-semi PMIC docs to YAML schemas
      commit: 413ec72963fc297f419a3d5f931bb43921969749

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

Thanks,
Mark
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/regulator/act8865-regulator.txt b/Documentation/devicetree/bindings/regulator/act8865-regulator.txt
deleted file mode 100644
index b9f58e480349..000000000000
--- a/Documentation/devicetree/bindings/regulator/act8865-regulator.txt
+++ /dev/null
@@ -1,117 +0,0 @@ 
-ACT88xx regulators
--------------------
-
-Required properties:
-- compatible: "active-semi,act8846" or "active-semi,act8865" or "active-semi,act8600"
-- reg: I2C slave address
-
-Optional properties:
-- system-power-controller: Telling whether or not this pmic is controlling
-  the system power. See Documentation/devicetree/bindings/power/power-controller.txt .
-- active-semi,vsel-high: Indicates the VSEL pin is high.
-  If this property is missing, assume the VSEL pin is low(0).
-
-Optional input supply properties:
-- for act8600:
-  - vp1-supply: The input supply for DCDC_REG1
-  - vp2-supply: The input supply for DCDC_REG2
-  - vp3-supply: The input supply for DCDC_REG3
-  - inl-supply: The input supply for LDO_REG5, LDO_REG6, LDO_REG7 and LDO_REG8
-  SUDCDC_REG4, LDO_REG9 and LDO_REG10 do not have separate supplies.
-- for act8846:
-  - vp1-supply: The input supply for REG1
-  - vp2-supply: The input supply for REG2
-  - vp3-supply: The input supply for REG3
-  - vp4-supply: The input supply for REG4
-  - inl1-supply: The input supply for REG5, REG6 and REG7
-  - inl2-supply: The input supply for REG8 and LDO_REG9
-  - inl3-supply: The input supply for REG10, REG11 and REG12
-- for act8865:
-  - vp1-supply: The input supply for DCDC_REG1
-  - vp2-supply: The input supply for DCDC_REG2
-  - vp3-supply: The input supply for DCDC_REG3
-  - inl45-supply: The input supply for LDO_REG1 and LDO_REG2
-  - inl67-supply: The input supply for LDO_REG3 and LDO_REG4
-
-Any standard regulator properties can be used to configure the single regulator.
-regulator-initial-mode, regulator-allowed-modes and regulator-mode could be specified
-for act8865 using mode values from dt-bindings/regulator/active-semi,8865-regulator.h
-file.
-
-The valid names for regulators are:
-	- for act8846:
-	REG1, REG2, REG3, REG4, REG5, REG6, REG7, REG8, REG9, REG10, REG11, REG12
-	- for act8865:
-	DCDC_REG1, DCDC_REG2, DCDC_REG3, LDO_REG1, LDO_REG2, LDO_REG3, LDO_REG4.
-	- for act8600:
-	DCDC_REG1, DCDC_REG2, DCDC_REG3, SUDCDC_REG4, LDO_REG5, LDO_REG6, LDO_REG7,
-	LDO_REG8, LDO_REG9, LDO_REG10,
-
-Example:
---------
-
-#include <dt-bindings/regulator/active-semi,8865-regulator.h>
-
-		i2c1: i2c@f0018000 {
-			pmic: act8865@5b {
-				compatible = "active-semi,act8865";
-				reg = <0x5b>;
-				active-semi,vsel-high;
-
-				regulators {
-					vcc_1v8_reg: DCDC_REG1 {
-						regulator-name = "VCC_1V8";
-						regulator-min-microvolt = <1800000>;
-						regulator-max-microvolt = <1800000>;
-						regulator-always-on;
-					};
-
-					vcc_1v2_reg: DCDC_REG2 {
-						regulator-name = "VCC_1V2";
-						regulator-min-microvolt = <1100000>;
-						regulator-max-microvolt = <1300000>;
-						regulator-always-on;
-
-						regulator-allowed-modes = <ACT8865_REGULATOR_MODE_FIXED>,
-									  <ACT8865_REGULATOR_MODE_LOWPOWER>;
-						regulator-initial-mode = <ACT8865_REGULATOR_MODE_FIXED>;
-
-						regulator-state-mem {
-							regulator-on-in-suspend;
-							regulator-suspend-min-microvolt = <1150000>;
-							regulator-suspend-max-microvolt = <1150000>;
-							regulator-changeable-in-suspend;
-							regulator-mode = <ACT8865_REGULATOR_MODE_LOWPOWER>;
-						};
-					};
-
-					vcc_3v3_reg: DCDC_REG3 {
-						regulator-name = "VCC_3V3";
-						regulator-min-microvolt = <3300000>;
-						regulator-max-microvolt = <3300000>;
-						regulator-always-on;
-					};
-
-					vddana_reg: LDO_REG1 {
-						regulator-name = "VDDANA";
-						regulator-min-microvolt = <3300000>;
-						regulator-max-microvolt = <3300000>;
-						regulator-always-on;
-
-						regulator-allowed-modes = <ACT8865_REGULATOR_MODE_NORMAL>,
-									  <ACT8865_REGULATOR_MODE_LOWPOWER>;
-						regulator-initial-mode = <ACT8865_REGULATOR_MODE_NORMAL>;
-
-						regulator-state-mem {
-							regulator-off-in-suspend;
-						};
-					};
-
-					vddfuse_reg: LDO_REG2 {
-						regulator-name = "FUSE_2V5";
-						regulator-min-microvolt = <2500000>;
-						regulator-max-microvolt = <2500000>;
-					};
-				};
-			};
-		};
diff --git a/Documentation/devicetree/bindings/regulator/act8945a-regulator.txt b/Documentation/devicetree/bindings/regulator/act8945a-regulator.txt
deleted file mode 100644
index 4017527619ab..000000000000
--- a/Documentation/devicetree/bindings/regulator/act8945a-regulator.txt
+++ /dev/null
@@ -1,113 +0,0 @@ 
-Device-Tree bindings for regulators of Active-semi ACT8945A Multi-Function Device
-
-Required properties:
- - compatible: "active-semi,act8945a", please refer to ../mfd/act8945a.txt.
-
-Optional properties:
-- active-semi,vsel-high: Indicates if the VSEL pin is set to logic-high.
-  If this property is missing, assume the VSEL pin is set to logic-low.
-
-Optional input supply properties:
-  - vp1-supply: The input supply for REG_DCDC1
-  - vp2-supply: The input supply for REG_DCDC2
-  - vp3-supply: The input supply for REG_DCDC3
-  - inl45-supply: The input supply for REG_LDO1 and REG_LDO2
-  - inl67-supply: The input supply for REG_LDO3 and REG_LDO4
-
-Any standard regulator properties can be used to configure the single regulator.
-regulator-initial-mode, regulator-allowed-modes and regulator-mode could be
-specified using mode values from dt-bindings/regulator/active-semi,8945a-regulator.h
-file.
-
-The valid names for regulators are:
-	REG_DCDC1, REG_DCDC2, REG_DCDC3, REG_LDO1, REG_LDO2, REG_LDO3, REG_LDO4.
-
-Example:
-
-#include <dt-bindings/regulator/active-semi,8945a-regulator.h>
-
-	pmic@5b {
-		compatible = "active-semi,act8945a";
-		reg = <0x5b>;
-
-		active-semi,vsel-high;
-
-		regulators {
-			vdd_1v35_reg: REG_DCDC1 {
-				regulator-name = "VDD_1V35";
-				regulator-min-microvolt = <1350000>;
-				regulator-max-microvolt = <1350000>;
-				regulator-always-on;
-
-				regulator-allowed-modes = <ACT8945A_REGULATOR_MODE_FIXED>,
-							  <ACT8945A_REGULATOR_MODE_LOWPOWER>;
-				regulator-initial-mode = <ACT8945A_REGULATOR_MODE_FIXED>;
-
-				regulator-state-mem {
-					regulator-on-in-suspend;
-					regulator-suspend-min-microvolt=<1400000>;
-					regulator-suspend-max-microvolt=<1400000>;
-					regulator-changeable-in-suspend;
-					regulator-mode=<ACT8945A_REGULATOR_MODE_LOWPOWER>;
-				};
-			};
-
-			vdd_1v2_reg: REG_DCDC2 {
-				regulator-name = "VDD_1V2";
-				regulator-min-microvolt = <1100000>;
-				regulator-max-microvolt = <1300000>;
-				regulator-always-on;
-
-				regulator-allowed-modes = <ACT8945A_REGULATOR_MODE_FIXED>,
-							  <ACT8945A_REGULATOR_MODE_LOWPOWER>;
-				regulator-initial-mode = <ACT8945A_REGULATOR_MODE_FIXED>;
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			vdd_3v3_reg: REG_DCDC3 {
-				regulator-name = "VDD_3V3";
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			vdd_fuse_reg: REG_LDO1 {
-				regulator-name = "VDD_FUSE";
-				regulator-min-microvolt = <2500000>;
-				regulator-max-microvolt = <2500000>;
-				regulator-always-on;
-
-				regulator-allowed-modes = <ACT8945A_REGULATOR_MODE_NORMAL>,
-							  <ACT8945A_REGULATOR_MODE_LOWPOWER>;
-				regulator-initial-mode = <ACT8945A_REGULATOR_MODE_NORMAL>;
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			vdd_3v3_lp_reg: REG_LDO2 {
-				regulator-name = "VDD_3V3_LP";
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			vdd_led_reg: REG_LDO3 {
-				regulator-name = "VDD_LED";
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			vdd_sdhc_1v8_reg: REG_LDO4 {
-				regulator-name = "VDD_SDHC_1V8";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-			};
-		};
-	};
diff --git a/Documentation/devicetree/bindings/regulator/active-semi,act8600.yaml b/Documentation/devicetree/bindings/regulator/active-semi,act8600.yaml
new file mode 100644
index 000000000000..b8ca967bc83d
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/active-semi,act8600.yaml
@@ -0,0 +1,139 @@ 
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/active-semi,act8600.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Active-semi ACT8600 regulator
+
+maintainers:
+  - Paul Cercueil <paul@crapouillou.net>
+
+properties:
+  compatible:
+    const: active-semi,act8600
+
+  reg:
+    maxItems: 1
+
+  system-power-controller:
+    description:
+      Indicates that the ACT8600 is responsible for powering OFF
+      the system.
+    type: boolean
+
+  active-semi,vsel-high:
+    description:
+      Indicates the VSEL pin is high. If this property is missing,
+      the VSEL pin is assumed to be low.
+    type: boolean
+
+  regulators:
+    type: object
+    additionalProperties: false
+
+    properties:
+      DCDC1:
+        type: object
+        $ref: /schemas/regulator/regulator.yaml#
+        unevaluatedProperties: false
+
+        properties:
+          vp1-supply:
+            description: Handle to the VP1 input supply
+
+      DCDC2:
+        type: object
+        $ref: /schemas/regulator/regulator.yaml#
+        unevaluatedProperties: false
+
+        properties:
+          vp2-supply:
+            description: Handle to the VP2 input supply
+
+      DCDC3:
+        type: object
+        $ref: /schemas/regulator/regulator.yaml#
+        unevaluatedProperties: false
+
+        properties:
+          vp3-supply:
+            description: Handle to the VP3 input supply
+
+    patternProperties:
+      "^(SUDCDC_REG4|LDO_REG9|LDO_REG10)$":
+        type: object
+        $ref: /schemas/regulator/regulator.yaml#
+        unevaluatedProperties: false
+
+      "^LDO[5-8]$":
+        type: object
+        $ref: /schemas/regulator/regulator.yaml#
+        unevaluatedProperties: false
+
+        properties:
+          inl-supply:
+            description: Handle to the INL input supply
+
+additionalProperties: false
+
+required:
+  - reg
+  - compatible
+  - regulators
+
+examples:
+  - |
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      pmic@5a {
+        compatible = "active-semi,act8600";
+        reg = <0x5a>;
+
+        regulators {
+          SUDCDC_REG4 {
+            regulator-min-microvolt = <5300000>;
+            regulator-max-microvolt = <5300000>;
+            inl-supply = <&vcc>;
+          };
+
+          LDO5 {
+            regulator-min-microvolt = <2500000>;
+            regulator-max-microvolt = <2500000>;
+            inl-supply = <&vcc>;
+          };
+
+          LDO6 {
+            regulator-min-microvolt = <3300000>;
+            regulator-max-microvolt = <3300000>;
+            inl-supply = <&vcc>;
+          };
+
+          LDO7 {
+            regulator-min-microvolt = <3300000>;
+            regulator-max-microvolt = <3300000>;
+            inl-supply = <&vcc>;
+          };
+
+          LDO8 {
+            regulator-min-microvolt = <1800000>;
+            regulator-max-microvolt = <1800000>;
+            regulator-always-on;
+            inl-supply = <&vcc>;
+          };
+
+          LDO_REG9 {
+            regulator-min-microvolt = <3300000>;
+            regulator-max-microvolt = <3300000>;
+            regulator-always-on;
+            inl-supply = <&vcc>;
+          };
+
+          LDO_REG10 {
+            inl-supply = <&vcc>;
+          };
+        };
+      };
+    };
diff --git a/Documentation/devicetree/bindings/regulator/active-semi,act8846.yaml b/Documentation/devicetree/bindings/regulator/active-semi,act8846.yaml
new file mode 100644
index 000000000000..3725348bb235
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/active-semi,act8846.yaml
@@ -0,0 +1,205 @@ 
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/active-semi,act8846.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Active-semi ACT8846 regulator
+
+maintainers:
+  - Paul Cercueil <paul@crapouillou.net>
+
+properties:
+  compatible:
+    const: active-semi,act8846
+
+  reg:
+    maxItems: 1
+
+  system-power-controller:
+    description:
+      Indicates that the ACT8846 is responsible for powering OFF
+      the system.
+    type: boolean
+
+  active-semi,vsel-high:
+    description:
+      Indicates the VSEL pin is high. If this property is missing,
+      the VSEL pin is assumed to be low.
+    type: boolean
+
+  regulators:
+    type: object
+    additionalProperties: false
+
+    properties:
+      REG1:
+        type: object
+        $ref: /schemas/regulator/regulator.yaml#
+        unevaluatedProperties: false
+
+        properties:
+          vp1-supply:
+            description: Handle to the VP1 input supply
+
+      REG2:
+        type: object
+        $ref: /schemas/regulator/regulator.yaml#
+        unevaluatedProperties: false
+
+        properties:
+          vp2-supply:
+            description: Handle to the VP2 input supply
+
+      REG3:
+        type: object
+        $ref: /schemas/regulator/regulator.yaml#
+        unevaluatedProperties: false
+
+        properties:
+          vp3-supply:
+            description: Handle to the VP3 input supply
+
+      REG4:
+        type: object
+        $ref: /schemas/regulator/regulator.yaml#
+        unevaluatedProperties: false
+
+        properties:
+          vp4-supply:
+            description: Handle to the VP4 input supply
+
+    patternProperties:
+      "^REG[5-7]$":
+        type: object
+        $ref: /schemas/regulator/regulator.yaml#
+        unevaluatedProperties: false
+
+        properties:
+          inl1-supply:
+            description: Handle to the INL1 input supply
+
+      "^REG[8-9]$":
+        type: object
+        $ref: /schemas/regulator/regulator.yaml#
+        unevaluatedProperties: false
+
+        properties:
+          inl2-supply:
+            description: Handle to the INL2 input supply
+
+      "^REG1[0-2]$":
+        type: object
+        $ref: /schemas/regulator/regulator.yaml#
+        unevaluatedProperties: false
+
+        properties:
+          inl3-supply:
+            description: Handle to the INL3 input supply
+
+additionalProperties: false
+
+required:
+  - reg
+  - compatible
+  - regulators
+
+examples:
+  - |
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      pmic@5a {
+        compatible = "active-semi,act8846";
+        reg = <0x5a>;
+
+        system-power-controller;
+
+        regulators {
+          REG1 {
+            regulator-name = "VCC_DDR";
+            regulator-min-microvolt = <1200000>;
+            regulator-max-microvolt = <1200000>;
+            regulator-always-on;
+          };
+
+          REG2 {
+            regulator-name = "VCC_IO";
+            regulator-min-microvolt = <3300000>;
+            regulator-max-microvolt = <3300000>;
+            regulator-always-on;
+          };
+
+          REG3 {
+            regulator-name = "VDD_LOG";
+            regulator-min-microvolt = <1000000>;
+            regulator-max-microvolt = <1000000>;
+            regulator-always-on;
+          };
+
+          REG4 {
+            regulator-name = "VCC_20";
+            regulator-min-microvolt = <2000000>;
+            regulator-max-microvolt = <2000000>;
+            regulator-always-on;
+          };
+
+          REG5 {
+            regulator-name = "VCCIO_SD";
+            regulator-min-microvolt = <3300000>;
+            regulator-max-microvolt = <3300000>;
+            regulator-always-on;
+          };
+
+          REG6 {
+            regulator-name = "VDD10_LCD";
+            regulator-min-microvolt = <1000000>;
+            regulator-max-microvolt = <1000000>;
+            regulator-always-on;
+          };
+
+          REG7 {
+            regulator-name = "VCC_WL";
+            regulator-min-microvolt = <3300000>;
+            regulator-max-microvolt = <3300000>;
+            regulator-always-on;
+          };
+
+          REG8 {
+            regulator-name = "VCCA_33";
+            regulator-min-microvolt = <3300000>;
+            regulator-max-microvolt = <3300000>;
+            regulator-always-on;
+          };
+
+          REG9 {
+            regulator-name = "VCC_LAN";
+            regulator-min-microvolt = <3300000>;
+            regulator-max-microvolt = <3300000>;
+            regulator-always-on;
+          };
+
+          REG10 {
+            regulator-name = "VDD_10";
+            regulator-min-microvolt = <1000000>;
+            regulator-max-microvolt = <1000000>;
+            regulator-always-on;
+          };
+
+          REG11 {
+            regulator-name = "VCC_18";
+            regulator-min-microvolt = <1800000>;
+            regulator-max-microvolt = <1800000>;
+            regulator-always-on;
+          };
+
+          REG12 {
+            regulator-name = "VCC18_LCD";
+            regulator-min-microvolt = <1800000>;
+            regulator-max-microvolt = <1800000>;
+            regulator-always-on;
+          };
+        };
+      };
+    };
diff --git a/Documentation/devicetree/bindings/regulator/active-semi,act8865.yaml b/Documentation/devicetree/bindings/regulator/active-semi,act8865.yaml
new file mode 100644
index 000000000000..e8bf09faafb8
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/active-semi,act8865.yaml
@@ -0,0 +1,158 @@ 
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/active-semi,act8865.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Active-semi ACT8865 regulator
+
+maintainers:
+  - Paul Cercueil <paul@crapouillou.net>
+
+properties:
+  compatible:
+    const: active-semi,act8865
+
+  reg:
+    maxItems: 1
+
+  system-power-controller:
+    description:
+      Indicates that the ACT8865 is responsible for powering OFF
+      the system.
+    type: boolean
+
+  active-semi,vsel-high:
+    description:
+      Indicates the VSEL pin is high. If this property is missing,
+      the VSEL pin is assumed to be low.
+    type: boolean
+
+  regulators:
+    type: object
+    additionalProperties: false
+
+    properties:
+      DCDC_REG1:
+        type: object
+        $ref: /schemas/regulator/regulator.yaml#
+        unevaluatedProperties: false
+
+        properties:
+          vp1-supply:
+            description: Handle to the VP1 input supply
+
+      DCDC_REG2:
+        type: object
+        $ref: /schemas/regulator/regulator.yaml#
+        unevaluatedProperties: false
+
+        properties:
+          vp2-supply:
+            description: Handle to the VP2 input supply
+
+      DCDC_REG3:
+        type: object
+        $ref: /schemas/regulator/regulator.yaml#
+        unevaluatedProperties: false
+
+        properties:
+          vp3-supply:
+            description: Handle to the VP3 input supply
+
+    patternProperties:
+      "^LDO_REG[1-2]$":
+        type: object
+        $ref: /schemas/regulator/regulator.yaml#
+        unevaluatedProperties: false
+
+        properties:
+          inl45-supply:
+            description: Handle to the INL45 input supply
+
+      "^LDO_REG[3-4]$":
+        type: object
+        $ref: /schemas/regulator/regulator.yaml#
+        unevaluatedProperties: false
+
+        properties:
+          inl67-supply:
+            description: Handle to the INL67 input supply
+
+additionalProperties: false
+
+required:
+  - reg
+  - compatible
+  - regulators
+
+examples:
+  - |
+    #include <dt-bindings/regulator/active-semi,8865-regulator.h>
+
+    i2c1 {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      pmic@5b {
+        compatible = "active-semi,act8865";
+        reg = <0x5b>;
+        active-semi,vsel-high;
+
+        regulators {
+          DCDC_REG1 {
+            regulator-name = "VCC_1V8";
+            regulator-min-microvolt = <1800000>;
+            regulator-max-microvolt = <1800000>;
+            regulator-always-on;
+          };
+
+          DCDC_REG2 {
+            regulator-name = "VCC_1V2";
+            regulator-min-microvolt = <1100000>;
+            regulator-max-microvolt = <1300000>;
+            regulator-always-on;
+
+            regulator-allowed-modes = <ACT8865_REGULATOR_MODE_FIXED>,
+                                      <ACT8865_REGULATOR_MODE_LOWPOWER>;
+            regulator-initial-mode = <ACT8865_REGULATOR_MODE_FIXED>;
+
+            regulator-state-mem {
+              regulator-on-in-suspend;
+              regulator-suspend-min-microvolt = <1150000>;
+              regulator-suspend-max-microvolt = <1150000>;
+              regulator-changeable-in-suspend;
+              regulator-mode = <ACT8865_REGULATOR_MODE_LOWPOWER>;
+            };
+          };
+
+          DCDC_REG3 {
+            regulator-name = "VCC_3V3";
+            regulator-min-microvolt = <3300000>;
+            regulator-max-microvolt = <3300000>;
+            regulator-always-on;
+          };
+
+          LDO_REG1 {
+            regulator-name = "VDDANA";
+            regulator-min-microvolt = <3300000>;
+            regulator-max-microvolt = <3300000>;
+            regulator-always-on;
+
+            regulator-allowed-modes = <ACT8865_REGULATOR_MODE_NORMAL>,
+                                      <ACT8865_REGULATOR_MODE_LOWPOWER>;
+            regulator-initial-mode = <ACT8865_REGULATOR_MODE_NORMAL>;
+
+            regulator-state-mem {
+              regulator-off-in-suspend;
+            };
+          };
+
+          LDO_REG2 {
+            regulator-name = "FUSE_2V5";
+            regulator-min-microvolt = <2500000>;
+            regulator-max-microvolt = <2500000>;
+          };
+        };
+      };
+    };
diff --git a/Documentation/devicetree/bindings/regulator/active-semi,act8945a.yaml b/Documentation/devicetree/bindings/regulator/active-semi,act8945a.yaml
new file mode 100644
index 000000000000..bdf3f7d34ef5
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/active-semi,act8945a.yaml
@@ -0,0 +1,258 @@ 
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/active-semi,act8945a.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Active-semi ACT8945a regulator
+
+maintainers:
+  - Paul Cercueil <paul@crapouillou.net>
+
+properties:
+  compatible:
+    const: active-semi,act8945a
+
+  reg:
+    maxItems: 1
+
+  system-power-controller:
+    description:
+      Indicates that the ACT8945a is responsible for powering OFF
+      the system.
+    type: boolean
+
+  active-semi,vsel-high:
+    description:
+      Indicates the VSEL pin is high. If this property is missing,
+      the VSEL pin is assumed to be low.
+    type: boolean
+
+  regulators:
+    type: object
+    additionalProperties: false
+
+    properties:
+      REG_DCDC1:
+        type: object
+        $ref: /schemas/regulator/regulator.yaml#
+        unevaluatedProperties: false
+
+        properties:
+          vp1-supply:
+            description: Handle to the VP1 input supply
+
+      REG_DCDC2:
+        type: object
+        $ref: /schemas/regulator/regulator.yaml#
+        unevaluatedProperties: false
+
+        properties:
+          vp2-supply:
+            description: Handle to the VP2 input supply
+
+      REG_DCDC3:
+        type: object
+        $ref: /schemas/regulator/regulator.yaml#
+        unevaluatedProperties: false
+
+        properties:
+          vp3-supply:
+            description: Handle to the VP3 input supply
+
+    patternProperties:
+      "^REG_LDO[1-2]$":
+        type: object
+        $ref: /schemas/regulator/regulator.yaml#
+        unevaluatedProperties: false
+
+        properties:
+          inl45-supply:
+            description: Handle to the INL45 input supply
+
+      "^REG_LDO[3-4]$":
+        type: object
+        $ref: /schemas/regulator/regulator.yaml#
+        unevaluatedProperties: false
+
+        properties:
+          inl67-supply:
+            description: Handle to the INL67 input supply
+
+  charger:
+    type: object
+    additionalProperties: false
+
+    properties:
+      compatible:
+        const: active-semi,act8945a-charger
+
+      interrupts:
+        maxItems: 1
+
+      active-semi,chglev-gpios:
+        description: CGHLEV GPIO
+        maxItems: 1
+
+      active-semi,lbo-gpios:
+        description: LBO GPIO
+        maxItems: 1
+
+      active-semi,input-voltage-threshold-microvolt:
+        description: Input voltage threshold
+        maxItems: 1
+
+      active-semi,precondition-timeout:
+        description: Precondition timeout
+        $ref: /schemas/types.yaml#/definitions/uint32
+
+      active-semi,total-timeout:
+        description: Total timeout
+        $ref: /schemas/types.yaml#/definitions/uint32
+
+    required:
+      - compatible
+      - interrupts
+
+additionalProperties: false
+
+required:
+  - reg
+  - compatible
+  - regulators
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/mfd/atmel-flexcom.h>
+    #include <dt-bindings/regulator/active-semi,8945a-regulator.h>
+
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      pmic@5b {
+        compatible = "active-semi,act8945a";
+        reg = <0x5b>;
+        active-semi,vsel-high;
+
+        regulators {
+          REG_DCDC1 {
+            regulator-name = "VDD_1V35";
+            regulator-min-microvolt = <1350000>;
+            regulator-max-microvolt = <1350000>;
+            regulator-allowed-modes = <ACT8945A_REGULATOR_MODE_FIXED>,
+                                      <ACT8945A_REGULATOR_MODE_LOWPOWER>;
+            regulator-initial-mode = <ACT8945A_REGULATOR_MODE_FIXED>;
+            regulator-always-on;
+
+            regulator-state-mem {
+              regulator-on-in-suspend;
+              regulator-suspend-min-microvolt = <1400000>;
+              regulator-suspend-max-microvolt = <1400000>;
+              regulator-changeable-in-suspend;
+              regulator-mode = <ACT8945A_REGULATOR_MODE_LOWPOWER>;
+            };
+          };
+
+          REG_DCDC2 {
+            regulator-name = "VDD_1V2";
+            regulator-min-microvolt = <1100000>;
+            regulator-max-microvolt = <1300000>;
+            regulator-allowed-modes = <ACT8945A_REGULATOR_MODE_FIXED>,
+                                      <ACT8945A_REGULATOR_MODE_LOWPOWER>;
+            regulator-initial-mode = <ACT8945A_REGULATOR_MODE_FIXED>;
+            regulator-always-on;
+
+            regulator-state-mem {
+              regulator-off-in-suspend;
+            };
+          };
+
+          REG_DCDC3 {
+            regulator-name = "VDD_3V3";
+            regulator-min-microvolt = <3300000>;
+            regulator-max-microvolt = <3300000>;
+            regulator-allowed-modes = <ACT8945A_REGULATOR_MODE_FIXED>,
+                                      <ACT8945A_REGULATOR_MODE_LOWPOWER>;
+            regulator-initial-mode = <ACT8945A_REGULATOR_MODE_FIXED>;
+            regulator-always-on;
+
+            regulator-state-mem {
+              regulator-off-in-suspend;
+            };
+          };
+
+          REG_LDO1 {
+            regulator-name = "VDD_FUSE";
+            regulator-min-microvolt = <2500000>;
+            regulator-max-microvolt = <2500000>;
+            regulator-allowed-modes = <ACT8945A_REGULATOR_MODE_NORMAL>,
+                                      <ACT8945A_REGULATOR_MODE_LOWPOWER>;
+            regulator-initial-mode = <ACT8945A_REGULATOR_MODE_NORMAL>;
+            regulator-always-on;
+
+            regulator-state-mem {
+              regulator-off-in-suspend;
+            };
+          };
+
+          REG_LDO2 {
+            regulator-name = "VDD_3V3_LP";
+            regulator-min-microvolt = <3300000>;
+            regulator-max-microvolt = <3300000>;
+            regulator-allowed-modes = <ACT8945A_REGULATOR_MODE_NORMAL>,
+                                      <ACT8945A_REGULATOR_MODE_LOWPOWER>;
+            regulator-initial-mode = <ACT8945A_REGULATOR_MODE_NORMAL>;
+            regulator-always-on;
+
+            regulator-state-mem {
+              regulator-off-in-suspend;
+            };
+          };
+
+          REG_LDO3 {
+            regulator-name = "VDD_LED";
+            regulator-min-microvolt = <3300000>;
+            regulator-max-microvolt = <3300000>;
+            regulator-allowed-modes = <ACT8945A_REGULATOR_MODE_NORMAL>,
+                                      <ACT8945A_REGULATOR_MODE_LOWPOWER>;
+            regulator-initial-mode = <ACT8945A_REGULATOR_MODE_NORMAL>;
+            regulator-always-on;
+
+            regulator-state-mem {
+              regulator-off-in-suspend;
+            };
+          };
+
+          REG_LDO4 {
+            regulator-name = "VDD_SDHC_1V8";
+            regulator-min-microvolt = <1800000>;
+            regulator-max-microvolt = <1800000>;
+            regulator-allowed-modes = <ACT8945A_REGULATOR_MODE_NORMAL>,
+                                      <ACT8945A_REGULATOR_MODE_LOWPOWER>;
+            regulator-initial-mode = <ACT8945A_REGULATOR_MODE_NORMAL>;
+            regulator-always-on;
+
+            regulator-state-mem {
+              regulator-off-in-suspend;
+            };
+          };
+        };
+
+        charger {
+          compatible = "active-semi,act8945a-charger";
+          pinctrl-names = "default";
+          pinctrl-0 = <&pinctrl_charger_chglev &pinctrl_charger_lbo &pinctrl_charger_irq>;
+          interrupt-parent = <&pioA>;
+          interrupts = <45 IRQ_TYPE_EDGE_RISING>;
+
+          active-semi,chglev-gpios = <&pioA 12 GPIO_ACTIVE_HIGH>;
+          active-semi,lbo-gpios = <&pioA 72 GPIO_ACTIVE_LOW>;
+          active-semi,input-voltage-threshold-microvolt = <6600>;
+          active-semi,precondition-timeout = <40>;
+          active-semi,total-timeout = <3>;
+        };
+      };
+    };