diff mbox series

[v5,1/2] drm/msm/dp: do not complete dp_aux_cmd_fifo_tx() if irq is not for aux transfer

Message ID 1671149343-312-2-git-send-email-quic_khsieh@quicinc.com
State Accepted
Commit 1cba0d150fa102439114a91b3e215909efc9f169
Headers show
Series do not complete dp_aux_cmd_fifo_tx() if irq is not for aux transfer | expand

Commit Message

Kuogee Hsieh Dec. 16, 2022, 12:09 a.m. UTC
There are 3 possible interrupt sources are handled by DP controller,
HPDstatus, Controller state changes and Aux read/write transaction.
At every irq, DP controller have to check isr status of every interrupt
sources and service the interrupt if its isr status bits shows interrupts
are pending. There is potential race condition may happen at current aux
isr handler implementation since it is always complete dp_aux_cmd_fifo_tx()
even irq is not for aux read or write transaction. This may cause aux read
transaction return premature if host aux data read is in the middle of
waiting for sink to complete transferring data to host while irq happen.
This will cause host's receiving buffer contains unexpected data. This
patch fixes this problem by checking aux isr and return immediately at
aux isr handler if there are no any isr status bits set.

Current there is a bug report regrading eDP edid corruption happen during
system booting up. After lengthy debugging to found that that VIDEO_READY
interrupt was continuously firing during system booting up which cause
dp_aux_isr() to complete dp_aux_cmd_fifo_tx() prematurely to retrieve data
from aux hardware buffer which is not yet contains complete data transfer
from sink. This cause edid corruption.

Follows are the signature at kernel logs when problem happen,
EDID has corrupt header
panel-simple-dp-aux aux-aea0000.edp: Couldn't identify panel via EDID
panel-simple-dp-aux aux-aea0000.edp: error -EIO: Couldn't detect panel nor find a fallback

Changes in v2:
-- do complete if (ret == IRQ_HANDLED) ay dp-aux_isr()
-- add more commit text

Changes in v3:
-- add Stephen suggested
-- dp_aux_isr() return IRQ_XXX back to caller
-- dp_ctrl_isr() return IRQ_XXX back to caller

Changes in v4:
-- split into two patches

Changes in v5:
-- delete empty line between tags

Fixes: c943b4948b58 ("drm/msm/dp: add displayPort driver support")
Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Tested-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
 drivers/gpu/drm/msm/dp/dp_aux.c | 4 ++++
 1 file changed, 4 insertions(+)
diff mbox series

Patch

diff --git a/drivers/gpu/drm/msm/dp/dp_aux.c b/drivers/gpu/drm/msm/dp/dp_aux.c
index d030a93..cc3efed 100644
--- a/drivers/gpu/drm/msm/dp/dp_aux.c
+++ b/drivers/gpu/drm/msm/dp/dp_aux.c
@@ -423,6 +423,10 @@  void dp_aux_isr(struct drm_dp_aux *dp_aux)
 
 	isr = dp_catalog_aux_get_irq(aux->catalog);
 
+	/* no interrupts pending, return immediately */
+	if (!isr)
+		return;
+
 	if (!aux->cmd_busy)
 		return;