diff mbox series

[v2,1/9] dt-bindings: interrupt-controller: renesas,rzg2l-irqc: Document RZ/G2UL SoC

Message ID 20221221000242.340202-2-prabhakar.mahadev-lad.rj@bp.renesas.com
State New
Headers show
Series Add IRQC support to RZ/G2UL SoC | expand

Commit Message

Lad, Prabhakar Dec. 21, 2022, 12:02 a.m. UTC
From: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>

Document RZ/G2UL (R9A07G043U) IRQC bindings. The IRQC block on RZ/G2UL SoC
is almost identical to one found on the RZ/G2L SoC the only difference
being it can support BUS_ERR_INT for which it has additional registers.
Hence new generic compatible string "renesas,rzg2ul-irqc" is added for
RZ/G2UL SoC.

Now that we have additional interrupt for RZ/G2UL and RZ/Five SoC
interrupt-names property is added so that we can parse them based on
names.

While at it updated the example node to four spaces and added
interrupt-names property.

Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
---
v1- > v2
* Dropped RB tags
* Added generic compatible string for rzg2ul
* Added interrupt-names
* Added checks for RZ/G2UL to make sure interrupts are 42 and interrupt-names
* Updated example node with interrupt-names
* Used 4 spaces for example node
---
 .../renesas,rzg2l-irqc.yaml                   | 240 +++++++++++++-----
 1 file changed, 180 insertions(+), 60 deletions(-)

Comments

Lad, Prabhakar Dec. 21, 2022, 9:06 p.m. UTC | #1
Hi Geert,

Thank you for the review.

On Wed, Dec 21, 2022 at 12:37 PM Geert Uytterhoeven
<geert@linux-m68k.org> wrote:
>
> Hi Prabhakar,
>
> On Wed, Dec 21, 2022 at 1:03 AM Prabhakar <prabhakar.csengg@gmail.com> wrote:
> > From: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
> >
> > Document RZ/G2UL (R9A07G043U) IRQC bindings. The IRQC block on RZ/G2UL SoC
> > is almost identical to one found on the RZ/G2L SoC the only difference
> > being it can support BUS_ERR_INT for which it has additional registers.
> > Hence new generic compatible string "renesas,rzg2ul-irqc" is added for
> > RZ/G2UL SoC.
> >
> > Now that we have additional interrupt for RZ/G2UL and RZ/Five SoC
> > interrupt-names property is added so that we can parse them based on
> > names.
> >
> > While at it updated the example node to four spaces and added
> > interrupt-names property.
> >
> > Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
> > ---
> > v1- > v2
> > * Dropped RB tags
> > * Added generic compatible string for rzg2ul
> > * Added interrupt-names
> > * Added checks for RZ/G2UL to make sure interrupts are 42 and interrupt-names
> > * Updated example node with interrupt-names
> > * Used 4 spaces for example node
>
> Thanks for the update!
>
> > --- a/Documentation/devicetree/bindings/interrupt-controller/renesas,rzg2l-irqc.yaml
> > +++ b/Documentation/devicetree/bindings/interrupt-controller/renesas,rzg2l-irqc.yaml
> > @@ -19,16 +19,19 @@ description: |
> >      - NMI edge select (NMI is not treated as NMI exception and supports fall edge and
> >        stand-up edge detection interrupts)
> >
> > -allOf:
> > -  - $ref: /schemas/interrupt-controller.yaml#
> > -
> >  properties:
> >    compatible:
> > -    items:
> > -      - enum:
> > -          - renesas,r9a07g044-irqc    # RZ/G2{L,LC}
> > -          - renesas,r9a07g054-irqc    # RZ/V2L
> > -      - const: renesas,rzg2l-irqc
> > +    oneOf:
> > +      - items:
> > +          - enum:
> > +              - renesas,r9a07g044-irqc    # RZ/G2{L,LC}
> > +              - renesas,r9a07g054-irqc    # RZ/V2L
> > +          - const: renesas,rzg2l-irqc
> > +
> > +      - items:
> > +          - enum:
> > +              - renesas,r9a07g043u-irqc   # RZ/G2UL
> > +          - const: renesas,rzg2ul-irqc
>
> I'm not sure it's worth splitting into RZ/G2L and RZ/G2UL alike
> variants, and adding the "renesas,rzg2ul-irqc" family-specific
> compatible value.  You can easily handle the difference by the presence
> (or absence) of the "bus-err" interrupt source.
>
Yes, the only reason to add "renesas,rzg2ul-irqc" is to differentiate
RZ/Five later. I have not worked out on how this driver will work in
case of RZ/Five yet with PLIC (as we sifive plic driver as a chained
handler and then we have the RISC-V intc driver). If you insist I can
drop it for now and then later when we add RZ/FIve we could add a
check for compat string maybe?

> I understand there "renesas,r9a07g043f-irqc" will be added later to
> support RZ/Five?
>
Yes.

Cheers,
Prabhakar
Geert Uytterhoeven Dec. 22, 2022, 8:19 a.m. UTC | #2
Hi Prabhakar,

On Wed, Dec 21, 2022 at 10:06 PM Lad, Prabhakar
<prabhakar.csengg@gmail.com> wrote:
> On Wed, Dec 21, 2022 at 12:37 PM Geert Uytterhoeven
> <geert@linux-m68k.org> wrote:
> > On Wed, Dec 21, 2022 at 1:03 AM Prabhakar <prabhakar.csengg@gmail.com> wrote:
> > > From: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
> > >
> > > Document RZ/G2UL (R9A07G043U) IRQC bindings. The IRQC block on RZ/G2UL SoC
> > > is almost identical to one found on the RZ/G2L SoC the only difference
> > > being it can support BUS_ERR_INT for which it has additional registers.
> > > Hence new generic compatible string "renesas,rzg2ul-irqc" is added for
> > > RZ/G2UL SoC.
> > >
> > > Now that we have additional interrupt for RZ/G2UL and RZ/Five SoC
> > > interrupt-names property is added so that we can parse them based on
> > > names.
> > >
> > > While at it updated the example node to four spaces and added
> > > interrupt-names property.
> > >
> > > Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
> > > ---
> > > v1- > v2
> > > * Dropped RB tags
> > > * Added generic compatible string for rzg2ul
> > > * Added interrupt-names
> > > * Added checks for RZ/G2UL to make sure interrupts are 42 and interrupt-names
> > > * Updated example node with interrupt-names
> > > * Used 4 spaces for example node
> >
> > Thanks for the update!
> >
> > > --- a/Documentation/devicetree/bindings/interrupt-controller/renesas,rzg2l-irqc.yaml
> > > +++ b/Documentation/devicetree/bindings/interrupt-controller/renesas,rzg2l-irqc.yaml
> > > @@ -19,16 +19,19 @@ description: |
> > >      - NMI edge select (NMI is not treated as NMI exception and supports fall edge and
> > >        stand-up edge detection interrupts)
> > >
> > > -allOf:
> > > -  - $ref: /schemas/interrupt-controller.yaml#
> > > -
> > >  properties:
> > >    compatible:
> > > -    items:
> > > -      - enum:
> > > -          - renesas,r9a07g044-irqc    # RZ/G2{L,LC}
> > > -          - renesas,r9a07g054-irqc    # RZ/V2L
> > > -      - const: renesas,rzg2l-irqc
> > > +    oneOf:
> > > +      - items:
> > > +          - enum:
> > > +              - renesas,r9a07g044-irqc    # RZ/G2{L,LC}
> > > +              - renesas,r9a07g054-irqc    # RZ/V2L
> > > +          - const: renesas,rzg2l-irqc
> > > +
> > > +      - items:
> > > +          - enum:
> > > +              - renesas,r9a07g043u-irqc   # RZ/G2UL
> > > +          - const: renesas,rzg2ul-irqc
> >
> > I'm not sure it's worth splitting into RZ/G2L and RZ/G2UL alike
> > variants, and adding the "renesas,rzg2ul-irqc" family-specific
> > compatible value.  You can easily handle the difference by the presence
> > (or absence) of the "bus-err" interrupt source.
> >
> Yes, the only reason to add "renesas,rzg2ul-irqc" is to differentiate
> RZ/Five later. I have not worked out on how this driver will work in
> case of RZ/Five yet with PLIC (as we sifive plic driver as a chained
> handler and then we have the RISC-V intc driver). If you insist I can
> drop it for now and then later when we add RZ/FIve we could add a
> check for compat string maybe?

Given you already use "renesas,r9a07g043u-irqc" (note the "u") here,
you will have "renesas,r9a07g043f-irqc" to handle the (minor)
differences.

> > I understand there "renesas,r9a07g043f-irqc" will be added later to
> > support RZ/Five?
> >
> Yes.

Gr{oetje,eeting}s,

                        Geert

--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds
Lad, Prabhakar Dec. 22, 2022, 11:53 a.m. UTC | #3
Hi Geert,

On Thu, Dec 22, 2022 at 8:19 AM Geert Uytterhoeven <geert@linux-m68k.org> wrote:
>
> Hi Prabhakar,
>
> On Wed, Dec 21, 2022 at 10:06 PM Lad, Prabhakar
> <prabhakar.csengg@gmail.com> wrote:
> > On Wed, Dec 21, 2022 at 12:37 PM Geert Uytterhoeven
> > <geert@linux-m68k.org> wrote:
> > > On Wed, Dec 21, 2022 at 1:03 AM Prabhakar <prabhakar.csengg@gmail.com> wrote:
> > > > From: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
> > > >
> > > > Document RZ/G2UL (R9A07G043U) IRQC bindings. The IRQC block on RZ/G2UL SoC
> > > > is almost identical to one found on the RZ/G2L SoC the only difference
> > > > being it can support BUS_ERR_INT for which it has additional registers.
> > > > Hence new generic compatible string "renesas,rzg2ul-irqc" is added for
> > > > RZ/G2UL SoC.
> > > >
> > > > Now that we have additional interrupt for RZ/G2UL and RZ/Five SoC
> > > > interrupt-names property is added so that we can parse them based on
> > > > names.
> > > >
> > > > While at it updated the example node to four spaces and added
> > > > interrupt-names property.
> > > >
> > > > Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
> > > > ---
> > > > v1- > v2
> > > > * Dropped RB tags
> > > > * Added generic compatible string for rzg2ul
> > > > * Added interrupt-names
> > > > * Added checks for RZ/G2UL to make sure interrupts are 42 and interrupt-names
> > > > * Updated example node with interrupt-names
> > > > * Used 4 spaces for example node
> > >
> > > Thanks for the update!
> > >
> > > > --- a/Documentation/devicetree/bindings/interrupt-controller/renesas,rzg2l-irqc.yaml
> > > > +++ b/Documentation/devicetree/bindings/interrupt-controller/renesas,rzg2l-irqc.yaml
> > > > @@ -19,16 +19,19 @@ description: |
> > > >      - NMI edge select (NMI is not treated as NMI exception and supports fall edge and
> > > >        stand-up edge detection interrupts)
> > > >
> > > > -allOf:
> > > > -  - $ref: /schemas/interrupt-controller.yaml#
> > > > -
> > > >  properties:
> > > >    compatible:
> > > > -    items:
> > > > -      - enum:
> > > > -          - renesas,r9a07g044-irqc    # RZ/G2{L,LC}
> > > > -          - renesas,r9a07g054-irqc    # RZ/V2L
> > > > -      - const: renesas,rzg2l-irqc
> > > > +    oneOf:
> > > > +      - items:
> > > > +          - enum:
> > > > +              - renesas,r9a07g044-irqc    # RZ/G2{L,LC}
> > > > +              - renesas,r9a07g054-irqc    # RZ/V2L
> > > > +          - const: renesas,rzg2l-irqc
> > > > +
> > > > +      - items:
> > > > +          - enum:
> > > > +              - renesas,r9a07g043u-irqc   # RZ/G2UL
> > > > +          - const: renesas,rzg2ul-irqc
> > >
> > > I'm not sure it's worth splitting into RZ/G2L and RZ/G2UL alike
> > > variants, and adding the "renesas,rzg2ul-irqc" family-specific
> > > compatible value.  You can easily handle the difference by the presence
> > > (or absence) of the "bus-err" interrupt source.
> > >
> > Yes, the only reason to add "renesas,rzg2ul-irqc" is to differentiate
> > RZ/Five later. I have not worked out on how this driver will work in
> > case of RZ/Five yet with PLIC (as we sifive plic driver as a chained
> > handler and then we have the RISC-V intc driver). If you insist I can
> > drop it for now and then later when we add RZ/FIve we could add a
> > check for compat string maybe?
>
> Given you already use "renesas,r9a07g043u-irqc" (note the "u") here,
> you will have "renesas,r9a07g043f-irqc" to handle the (minor)
> differences.
>
Ok, so I'll revert back to the previous version of the patch and still
add the interrupt names.

Cheers,
Prabhakar
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/interrupt-controller/renesas,rzg2l-irqc.yaml b/Documentation/devicetree/bindings/interrupt-controller/renesas,rzg2l-irqc.yaml
index 33b90e975e33..6a0cf57698ab 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/renesas,rzg2l-irqc.yaml
+++ b/Documentation/devicetree/bindings/interrupt-controller/renesas,rzg2l-irqc.yaml
@@ -19,16 +19,19 @@  description: |
     - NMI edge select (NMI is not treated as NMI exception and supports fall edge and
       stand-up edge detection interrupts)
 
-allOf:
-  - $ref: /schemas/interrupt-controller.yaml#
-
 properties:
   compatible:
-    items:
-      - enum:
-          - renesas,r9a07g044-irqc    # RZ/G2{L,LC}
-          - renesas,r9a07g054-irqc    # RZ/V2L
-      - const: renesas,rzg2l-irqc
+    oneOf:
+      - items:
+          - enum:
+              - renesas,r9a07g044-irqc    # RZ/G2{L,LC}
+              - renesas,r9a07g054-irqc    # RZ/V2L
+          - const: renesas,rzg2l-irqc
+
+      - items:
+          - enum:
+              - renesas,r9a07g043u-irqc   # RZ/G2UL
+          - const: renesas,rzg2ul-irqc
 
   '#interrupt-cells':
     description: The first cell should contain external interrupt number (IRQ0-7) and the
@@ -44,7 +47,96 @@  properties:
     maxItems: 1
 
   interrupts:
-    maxItems: 41
+    minItems: 41
+    items:
+      - description: NMI interrupt
+      - description: IRQ0 interrupt
+      - description: IRQ1 interrupt
+      - description: IRQ2 interrupt
+      - description: IRQ3 interrupt
+      - description: IRQ4 interrupt
+      - description: IRQ5 interrupt
+      - description: IRQ6 interrupt
+      - description: IRQ7 interrupt
+      - description: GPIO interrupt, TINT0
+      - description: GPIO interrupt, TINT1
+      - description: GPIO interrupt, TINT2
+      - description: GPIO interrupt, TINT3
+      - description: GPIO interrupt, TINT4
+      - description: GPIO interrupt, TINT5
+      - description: GPIO interrupt, TINT6
+      - description: GPIO interrupt, TINT7
+      - description: GPIO interrupt, TINT8
+      - description: GPIO interrupt, TINT9
+      - description: GPIO interrupt, TINT10
+      - description: GPIO interrupt, TINT11
+      - description: GPIO interrupt, TINT12
+      - description: GPIO interrupt, TINT13
+      - description: GPIO interrupt, TINT14
+      - description: GPIO interrupt, TINT15
+      - description: GPIO interrupt, TINT16
+      - description: GPIO interrupt, TINT17
+      - description: GPIO interrupt, TINT18
+      - description: GPIO interrupt, TINT19
+      - description: GPIO interrupt, TINT20
+      - description: GPIO interrupt, TINT21
+      - description: GPIO interrupt, TINT22
+      - description: GPIO interrupt, TINT23
+      - description: GPIO interrupt, TINT24
+      - description: GPIO interrupt, TINT25
+      - description: GPIO interrupt, TINT26
+      - description: GPIO interrupt, TINT27
+      - description: GPIO interrupt, TINT28
+      - description: GPIO interrupt, TINT29
+      - description: GPIO interrupt, TINT30
+      - description: GPIO interrupt, TINT31
+      - description: Bus error interrupt
+
+  interrupt-names:
+    minItems: 41
+    items:
+      - const: nmi
+      - const: irq0
+      - const: irq1
+      - const: irq2
+      - const: irq3
+      - const: irq4
+      - const: irq5
+      - const: irq6
+      - const: irq7
+      - const: tint0
+      - const: tint1
+      - const: tint2
+      - const: tint3
+      - const: tint4
+      - const: tint5
+      - const: tint6
+      - const: tint7
+      - const: tint8
+      - const: tint9
+      - const: tint10
+      - const: tint11
+      - const: tint12
+      - const: tint13
+      - const: tint14
+      - const: tint15
+      - const: tint16
+      - const: tint17
+      - const: tint18
+      - const: tint19
+      - const: tint20
+      - const: tint21
+      - const: tint22
+      - const: tint23
+      - const: tint24
+      - const: tint25
+      - const: tint26
+      - const: tint27
+      - const: tint28
+      - const: tint29
+      - const: tint30
+      - const: tint31
+      - const: bus-err
 
   clocks:
     maxItems: 2
@@ -72,6 +164,23 @@  required:
   - power-domains
   - resets
 
+allOf:
+  - $ref: /schemas/interrupt-controller.yaml#
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: renesas,rzg2ul-irqc
+    then:
+      properties:
+        interrupts:
+          minItems: 42
+        interrupt-names:
+          minItems: 42
+      required:
+        - interrupt-names
+
 unevaluatedProperties: false
 
 examples:
@@ -80,55 +189,66 @@  examples:
     #include <dt-bindings/clock/r9a07g044-cpg.h>
 
     irqc: interrupt-controller@110a0000 {
-            compatible = "renesas,r9a07g044-irqc", "renesas,rzg2l-irqc";
-            reg = <0x110a0000 0x10000>;
-            #interrupt-cells = <2>;
-            #address-cells = <0>;
-            interrupt-controller;
-            interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
-                         <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
-                         <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
-                         <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
-                         <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
-                         <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
-                         <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
-                         <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
-                         <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
-                         <GIC_SPI 444 IRQ_TYPE_LEVEL_HIGH>,
-                         <GIC_SPI 445 IRQ_TYPE_LEVEL_HIGH>,
-                         <GIC_SPI 446 IRQ_TYPE_LEVEL_HIGH>,
-                         <GIC_SPI 447 IRQ_TYPE_LEVEL_HIGH>,
-                         <GIC_SPI 448 IRQ_TYPE_LEVEL_HIGH>,
-                         <GIC_SPI 449 IRQ_TYPE_LEVEL_HIGH>,
-                         <GIC_SPI 450 IRQ_TYPE_LEVEL_HIGH>,
-                         <GIC_SPI 451 IRQ_TYPE_LEVEL_HIGH>,
-                         <GIC_SPI 452 IRQ_TYPE_LEVEL_HIGH>,
-                         <GIC_SPI 453 IRQ_TYPE_LEVEL_HIGH>,
-                         <GIC_SPI 454 IRQ_TYPE_LEVEL_HIGH>,
-                         <GIC_SPI 455 IRQ_TYPE_LEVEL_HIGH>,
-                         <GIC_SPI 456 IRQ_TYPE_LEVEL_HIGH>,
-                         <GIC_SPI 457 IRQ_TYPE_LEVEL_HIGH>,
-                         <GIC_SPI 458 IRQ_TYPE_LEVEL_HIGH>,
-                         <GIC_SPI 459 IRQ_TYPE_LEVEL_HIGH>,
-                         <GIC_SPI 460 IRQ_TYPE_LEVEL_HIGH>,
-                         <GIC_SPI 461 IRQ_TYPE_LEVEL_HIGH>,
-                         <GIC_SPI 462 IRQ_TYPE_LEVEL_HIGH>,
-                         <GIC_SPI 463 IRQ_TYPE_LEVEL_HIGH>,
-                         <GIC_SPI 464 IRQ_TYPE_LEVEL_HIGH>,
-                         <GIC_SPI 465 IRQ_TYPE_LEVEL_HIGH>,
-                         <GIC_SPI 466 IRQ_TYPE_LEVEL_HIGH>,
-                         <GIC_SPI 467 IRQ_TYPE_LEVEL_HIGH>,
-                         <GIC_SPI 468 IRQ_TYPE_LEVEL_HIGH>,
-                         <GIC_SPI 469 IRQ_TYPE_LEVEL_HIGH>,
-                         <GIC_SPI 470 IRQ_TYPE_LEVEL_HIGH>,
-                         <GIC_SPI 471 IRQ_TYPE_LEVEL_HIGH>,
-                         <GIC_SPI 472 IRQ_TYPE_LEVEL_HIGH>,
-                         <GIC_SPI 473 IRQ_TYPE_LEVEL_HIGH>,
-                         <GIC_SPI 474 IRQ_TYPE_LEVEL_HIGH>,
-                         <GIC_SPI 475 IRQ_TYPE_LEVEL_HIGH>;
-            clocks = <&cpg CPG_MOD R9A07G044_IA55_CLK>,
-                     <&cpg CPG_MOD R9A07G044_IA55_PCLK>;
-            clock-names = "clk", "pclk";
-            power-domains = <&cpg>;
-            resets = <&cpg R9A07G044_IA55_RESETN>;
+        compatible = "renesas,r9a07g044-irqc", "renesas,rzg2l-irqc";
+        reg = <0x110a0000 0x10000>;
+        #interrupt-cells = <2>;
+        #address-cells = <0>;
+        interrupt-controller;
+        interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 444 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 445 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 446 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 447 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 448 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 449 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 450 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 451 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 452 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 453 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 454 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 455 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 456 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 457 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 458 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 459 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 460 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 461 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 462 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 463 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 464 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 465 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 466 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 467 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 468 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 469 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 470 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 471 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 472 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 473 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 474 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 475 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-names = "nmi",
+                          "irq0", "irq1", "irq2", "irq3",
+                          "irq4", "irq5", "irq6", "irq7",
+                          "tint0", "tint1", "tint2", "tint3",
+                          "tint4", "tint5", "tint6", "tint7",
+                          "tint8", "tint9", "tint10", "tint11",
+                          "tint12", "tint13", "tint14", "tint15",
+                          "tint16", "tint17", "tint18", "tint19",
+                          "tint20", "tint21", "tint22", "tint23",
+                          "tint24", "tint25", "tint26", "tint27",
+                          "tint28", "tint29", "tint30", "tint31";
+        clocks = <&cpg CPG_MOD R9A07G044_IA55_CLK>,
+                 <&cpg CPG_MOD R9A07G044_IA55_PCLK>;
+        clock-names = "clk", "pclk";
+        power-domains = <&cpg>;
+        resets = <&cpg R9A07G044_IA55_RESETN>;
     };