diff mbox series

[v2,05/10] i2c: i801: add i801_simple_transaction(), complementing i801_block_transaction()

Message ID be365c4b-b625-e59d-86c6-46bd5aa91ca1@gmail.com
State New
Headers show
Series i2c: i801: Series with minor improvements | expand

Commit Message

Heiner Kallweit Dec. 19, 2022, 6:17 p.m. UTC
This patch factors out non-block pre/post processing to a new function
i801_simple_transaction(), complementing existing function
i801_block_transaction(). This makes i801_access() better readable.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
---
v2:
- rename new function to i801_simple_transaction
- code style fixes
---
 drivers/i2c/busses/i2c-i801.c | 92 +++++++++++++++++++++--------------
 1 file changed, 55 insertions(+), 37 deletions(-)

Comments

Jean Delvare Feb. 13, 2023, 5:04 p.m. UTC | #1
On Mon, 19 Dec 2022 19:17:03 +0100, Heiner Kallweit wrote:
> This patch factors out non-block pre/post processing to a new function
> i801_simple_transaction(), complementing existing function
> i801_block_transaction(). This makes i801_access() better readable.
> 
> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
> ---
> v2:
> - rename new function to i801_simple_transaction
> - code style fixes
> ---
>  drivers/i2c/busses/i2c-i801.c | 92 +++++++++++++++++++++--------------
>  1 file changed, 55 insertions(+), 37 deletions(-)
> 
> diff --git a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c
> index 882cf5135..d934d410b 100644
> --- a/drivers/i2c/busses/i2c-i801.c
> +++ b/drivers/i2c/busses/i2c-i801.c
> @@ -732,6 +732,59 @@ static void i801_set_hstadd(struct i801_priv *priv, u8 addr, char read_write)
>  	outb_p((addr << 1) | (read_write & 0x01), SMBHSTADD(priv));
>  }
>  
> +/* Single value transaction function */
> +static int i801_simple_transaction(struct i801_priv *priv, union i2c_smbus_data *data,
> +				   char read_write, int command)
> +{
> +	int xact, ret;
> +
> +	switch (command) {

I did not notice during my initial review, but this parameter name is
confusing, and this becomes even more obvious with patch 7 later. What
you name "command" here is named "size" in function i801_access(). And
what is named "command" there, you will name "hstcmd" in this function
in patch 7. I would prefer to keep the same names (and parameter order)
throughout the function stack for consistency.

Rest is OK.
diff mbox series

Patch

diff --git a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c
index 882cf5135..d934d410b 100644
--- a/drivers/i2c/busses/i2c-i801.c
+++ b/drivers/i2c/busses/i2c-i801.c
@@ -732,6 +732,59 @@  static void i801_set_hstadd(struct i801_priv *priv, u8 addr, char read_write)
 	outb_p((addr << 1) | (read_write & 0x01), SMBHSTADD(priv));
 }
 
+/* Single value transaction function */
+static int i801_simple_transaction(struct i801_priv *priv, union i2c_smbus_data *data,
+				   char read_write, int command)
+{
+	int xact, ret;
+
+	switch (command) {
+	case I2C_SMBUS_QUICK:
+		xact = I801_QUICK;
+		break;
+	case I2C_SMBUS_BYTE:
+		xact = I801_BYTE;
+		break;
+	case I2C_SMBUS_BYTE_DATA:
+		if (read_write == I2C_SMBUS_WRITE)
+			outb_p(data->byte, SMBHSTDAT0(priv));
+		xact = I801_BYTE_DATA;
+		break;
+	case I2C_SMBUS_WORD_DATA:
+		if (read_write == I2C_SMBUS_WRITE) {
+			outb_p(data->word & 0xff, SMBHSTDAT0(priv));
+			outb_p((data->word & 0xff00) >> 8, SMBHSTDAT1(priv));
+		}
+		xact = I801_WORD_DATA;
+		break;
+	case I2C_SMBUS_PROC_CALL:
+		outb_p(data->word & 0xff, SMBHSTDAT0(priv));
+		outb_p((data->word & 0xff00) >> 8, SMBHSTDAT1(priv));
+		xact = I801_PROC_CALL;
+		break;
+	default:
+		return -EOPNOTSUPP;
+	}
+
+	ret = i801_transaction(priv, xact);
+	if (ret || read_write == I2C_SMBUS_WRITE)
+		return ret;
+
+	switch (command) {
+	case I2C_SMBUS_BYTE:
+	case I2C_SMBUS_BYTE_DATA:
+		data->byte = inb_p(SMBHSTDAT0(priv));
+		break;
+	case I2C_SMBUS_WORD_DATA:
+	case I2C_SMBUS_PROC_CALL:
+		data->word = inb_p(SMBHSTDAT0(priv)) +
+			     (inb_p(SMBHSTDAT1(priv)) << 8);
+		break;
+	}
+
+	return 0;
+}
+
 /* Block transaction function */
 static int i801_block_transaction(struct i801_priv *priv, union i2c_smbus_data *data,
 				  char read_write, int command)
@@ -783,9 +836,7 @@  static s32 i801_access(struct i2c_adapter *adap, u16 addr,
 		       unsigned short flags, char read_write, u8 command,
 		       int size, union i2c_smbus_data *data)
 {
-	int hwpec;
-	int block = 0;
-	int ret, xact;
+	int hwpec, ret, block = 0;
 	struct i801_priv *priv = i2c_get_adapdata(adap);
 
 	mutex_lock(&priv->acpi_lock);
@@ -803,36 +854,23 @@  static s32 i801_access(struct i2c_adapter *adap, u16 addr,
 	switch (size) {
 	case I2C_SMBUS_QUICK:
 		i801_set_hstadd(priv, addr, read_write);
-		xact = I801_QUICK;
 		break;
 	case I2C_SMBUS_BYTE:
 		i801_set_hstadd(priv, addr, read_write);
 		if (read_write == I2C_SMBUS_WRITE)
 			outb_p(command, SMBHSTCMD(priv));
-		xact = I801_BYTE;
 		break;
 	case I2C_SMBUS_BYTE_DATA:
 		i801_set_hstadd(priv, addr, read_write);
 		outb_p(command, SMBHSTCMD(priv));
-		if (read_write == I2C_SMBUS_WRITE)
-			outb_p(data->byte, SMBHSTDAT0(priv));
-		xact = I801_BYTE_DATA;
 		break;
 	case I2C_SMBUS_WORD_DATA:
 		i801_set_hstadd(priv, addr, read_write);
 		outb_p(command, SMBHSTCMD(priv));
-		if (read_write == I2C_SMBUS_WRITE) {
-			outb_p(data->word & 0xff, SMBHSTDAT0(priv));
-			outb_p((data->word & 0xff00) >> 8, SMBHSTDAT1(priv));
-		}
-		xact = I801_WORD_DATA;
 		break;
 	case I2C_SMBUS_PROC_CALL:
 		i801_set_hstadd(priv, addr, I2C_SMBUS_WRITE);
 		outb_p(command, SMBHSTCMD(priv));
-		outb_p(data->word & 0xff, SMBHSTDAT0(priv));
-		outb_p((data->word & 0xff00) >> 8, SMBHSTDAT1(priv));
-		xact = I801_PROC_CALL;
 		read_write = I2C_SMBUS_READ;
 		break;
 	case I2C_SMBUS_BLOCK_DATA:
@@ -880,7 +918,7 @@  static s32 i801_access(struct i2c_adapter *adap, u16 addr,
 	if (block)
 		ret = i801_block_transaction(priv, data, read_write, size);
 	else
-		ret = i801_transaction(priv, xact);
+		ret = i801_simple_transaction(priv, data, read_write, size);
 
 	/* Some BIOSes don't like it when PEC is enabled at reboot or resume
 	   time, so we forcibly disable it after every transaction. Turn off
@@ -888,26 +926,6 @@  static s32 i801_access(struct i2c_adapter *adap, u16 addr,
 	if (hwpec || block)
 		outb_p(inb_p(SMBAUXCTL(priv)) &
 		       ~(SMBAUXCTL_CRC | SMBAUXCTL_E32B), SMBAUXCTL(priv));
-
-	if (block)
-		goto out;
-	if (ret)
-		goto out;
-	if ((read_write == I2C_SMBUS_WRITE) || (xact == I801_QUICK))
-		goto out;
-
-	switch (xact) {
-	case I801_BYTE:	/* Result put in SMBHSTDAT0 */
-	case I801_BYTE_DATA:
-		data->byte = inb_p(SMBHSTDAT0(priv));
-		break;
-	case I801_WORD_DATA:
-	case I801_PROC_CALL:
-		data->word = inb_p(SMBHSTDAT0(priv)) +
-			     (inb_p(SMBHSTDAT1(priv)) << 8);
-		break;
-	}
-
 out:
 	/*
 	 * Unlock the SMBus device for use by BIOS/ACPI,