diff mbox series

[2/2] arm64: dts: rockchip: Enable wifi module AP6398s for rk3566 box demo

Message ID 20221225114953.3518595-1-andyshrk@163.com
State Superseded
Headers show
Series rk3566 box demo io domain and network fix | expand

Commit Message

Andy Yan Dec. 25, 2022, 11:49 a.m. UTC
There is a AP6398s wifi/bt module on this board.
Fix the sdmmc1 dt node to make wifi work.

Fixes: 2e0537b16b25 ("arm64: dts: rockchip: Add dts for rockchip rk3566 box demo board")

Signed-off-by: Andy Yan <andyshrk@163.com>
---

 .../boot/dts/rockchip/rk3566-box-demo.dts     | 26 ++++++++++++++++---
 1 file changed, 22 insertions(+), 4 deletions(-)

Comments

Heiko Stuebner Dec. 28, 2022, 7:21 p.m. UTC | #1
Hi Andy,

Am Sonntag, 25. Dezember 2022, 12:49:53 CET schrieb Andy Yan:
> There is a AP6398s wifi/bt module on this board.
> Fix the sdmmc1 dt node to make wifi work.
> 
> Fixes: 2e0537b16b25 ("arm64: dts: rockchip: Add dts for rockchip rk3566 box demo board")
> 
> Signed-off-by: Andy Yan <andyshrk@163.com>
> ---
> 
>  .../boot/dts/rockchip/rk3566-box-demo.dts     | 26 ++++++++++++++++---
>  1 file changed, 22 insertions(+), 4 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/rockchip/rk3566-box-demo.dts b/arch/arm64/boot/dts/rockchip/rk3566-box-demo.dts
> index d956496d5221..6c0c24226b52 100644
> --- a/arch/arm64/boot/dts/rockchip/rk3566-box-demo.dts
> +++ b/arch/arm64/boot/dts/rockchip/rk3566-box-demo.dts
> @@ -324,8 +324,12 @@ wifi_enable_h: wifi-enable-h {
>  			rockchip,pins = <2 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>;
>  		};
>  
> +		wifi_host_wake_h: wifi-host-wake-l {
> +			rockchip,pins = <2 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
> +		};
> +
>  		wifi_32k: wifi-32k {
> -			rockchip,pins = <0 RK_PB0 2 &pcfg_pull_none>;
> +			rockchip,pins = <2 RK_PC6 1 &pcfg_pull_none>;
>  		};
>  	};
>  
> @@ -391,16 +395,30 @@ &sdmmc0 {
>  };
>  
>  &sdmmc1 {
> +	/* WiFi & BT combo module AMPAK AP6398S */
> +	#address-cells = <1>;
> +	#size-cells = <0>;
>  	bus-width = <4>;
> +	clock-frequency = <150000000>;
> +	cap-sdio-irq;
>  	cap-sd-highspeed;
> -	disable-wp;
> +	sd-uhs-sdr104;
> +	keep-power-in-suspend;
>  	mmc-pwrseq = <&sdio_pwrseq>;
>  	non-removable;
>  	pinctrl-names = "default";
>  	pinctrl-0 = <&sdmmc1_bus4 &sdmmc1_cmd &sdmmc1_clk>;
> -	vmmc-supply = <&vcc_3v3>;
> -	vqmmc-supply = <&vcca_1v8>;

why are you removing the mmc-supplies here?
The supplies needed for mmc to work should very much be present
I think, especially to also make sure something else doesn't
turn them off.

Heiko

>  	status = "okay";
> +
> +	brcmf: wifi@1 {
> +		compatible = "brcm,bcm4329-fmac";
> +		reg = <1>;
> +		interrupt-parent = <&gpio2>;
> +		interrupts = <RK_PB2 GPIO_ACTIVE_HIGH>;
> +		interrupt-names = "host-wake";
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&wifi_host_wake_h>;
> +	};
>  };
>  
>  &spdif {
>
Andy Yan Dec. 29, 2022, 11:55 a.m. UTC | #2
Hi Heiko:











At 2022-12-29 03:21:32, "Heiko Stuebner" <heiko@sntech.de> wrote:
>Hi Andy,
>
>Am Sonntag, 25. Dezember 2022, 12:49:53 CET schrieb Andy Yan:
>> There is a AP6398s wifi/bt module on this board.
>> Fix the sdmmc1 dt node to make wifi work.
>> 
>> Fixes: 2e0537b16b25 ("arm64: dts: rockchip: Add dts for rockchip rk3566 box demo board")
>> 
>> Signed-off-by: Andy Yan <andyshrk@163.com>
>> ---
>> 
>>  .../boot/dts/rockchip/rk3566-box-demo.dts     | 26 ++++++++++++++++---
>>  1 file changed, 22 insertions(+), 4 deletions(-)
>> 
>> diff --git a/arch/arm64/boot/dts/rockchip/rk3566-box-demo.dts b/arch/arm64/boot/dts/rockchip/rk3566-box-demo.dts
>> index d956496d5221..6c0c24226b52 100644
>> --- a/arch/arm64/boot/dts/rockchip/rk3566-box-demo.dts
>> +++ b/arch/arm64/boot/dts/rockchip/rk3566-box-demo.dts
>> @@ -324,8 +324,12 @@ wifi_enable_h: wifi-enable-h {
>>  			rockchip,pins = <2 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>;
>>  		};
>>  
>> +		wifi_host_wake_h: wifi-host-wake-l {
>> +			rockchip,pins = <2 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
>> +		};
>> +
>>  		wifi_32k: wifi-32k {
>> -			rockchip,pins = <0 RK_PB0 2 &pcfg_pull_none>;
>> +			rockchip,pins = <2 RK_PC6 1 &pcfg_pull_none>;
>>  		};
>>  	};
>>  
>> @@ -391,16 +395,30 @@ &sdmmc0 {
>>  };
>>  
>>  &sdmmc1 {
>> +	/* WiFi & BT combo module AMPAK AP6398S */
>> +	#address-cells = <1>;
>> +	#size-cells = <0>;
>>  	bus-width = <4>;
>> +	clock-frequency = <150000000>;
>> +	cap-sdio-irq;
>>  	cap-sd-highspeed;
>> -	disable-wp;
>> +	sd-uhs-sdr104;
>> +	keep-power-in-suspend;
>>  	mmc-pwrseq = <&sdio_pwrseq>;
>>  	non-removable;
>>  	pinctrl-names = "default";
>>  	pinctrl-0 = <&sdmmc1_bus4 &sdmmc1_cmd &sdmmc1_clk>;
>> -	vmmc-supply = <&vcc_3v3>;
>> -	vqmmc-supply = <&vcca_1v8>;
>
>why are you removing the mmc-supplies here?
>The supplies needed for mmc to work should very much be present
>I think, especially to also make sure something else doesn't
>turn them off.

Thanks for catching this, I will fix it in V2.

>
>Heiko
>
>>  	status = "okay";
>> +
>> +	brcmf: wifi@1 {
>> +		compatible = "brcm,bcm4329-fmac";
>> +		reg = <1>;
>> +		interrupt-parent = <&gpio2>;
>> +		interrupts = <RK_PB2 GPIO_ACTIVE_HIGH>;
>> +		interrupt-names = "host-wake";
>> +		pinctrl-names = "default";
>> +		pinctrl-0 = <&wifi_host_wake_h>;
>> +	};
>>  };
>>  
>>  &spdif {
>> 
>
>
>
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/rockchip/rk3566-box-demo.dts b/arch/arm64/boot/dts/rockchip/rk3566-box-demo.dts
index d956496d5221..6c0c24226b52 100644
--- a/arch/arm64/boot/dts/rockchip/rk3566-box-demo.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3566-box-demo.dts
@@ -324,8 +324,12 @@  wifi_enable_h: wifi-enable-h {
 			rockchip,pins = <2 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>;
 		};
 
+		wifi_host_wake_h: wifi-host-wake-l {
+			rockchip,pins = <2 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
 		wifi_32k: wifi-32k {
-			rockchip,pins = <0 RK_PB0 2 &pcfg_pull_none>;
+			rockchip,pins = <2 RK_PC6 1 &pcfg_pull_none>;
 		};
 	};
 
@@ -391,16 +395,30 @@  &sdmmc0 {
 };
 
 &sdmmc1 {
+	/* WiFi & BT combo module AMPAK AP6398S */
+	#address-cells = <1>;
+	#size-cells = <0>;
 	bus-width = <4>;
+	clock-frequency = <150000000>;
+	cap-sdio-irq;
 	cap-sd-highspeed;
-	disable-wp;
+	sd-uhs-sdr104;
+	keep-power-in-suspend;
 	mmc-pwrseq = <&sdio_pwrseq>;
 	non-removable;
 	pinctrl-names = "default";
 	pinctrl-0 = <&sdmmc1_bus4 &sdmmc1_cmd &sdmmc1_clk>;
-	vmmc-supply = <&vcc_3v3>;
-	vqmmc-supply = <&vcca_1v8>;
 	status = "okay";
+
+	brcmf: wifi@1 {
+		compatible = "brcm,bcm4329-fmac";
+		reg = <1>;
+		interrupt-parent = <&gpio2>;
+		interrupts = <RK_PB2 GPIO_ACTIVE_HIGH>;
+		interrupt-names = "host-wake";
+		pinctrl-names = "default";
+		pinctrl-0 = <&wifi_host_wake_h>;
+	};
 };
 
 &spdif {