| Message ID | 20221226114513.4569-1-pali@kernel.org |
|---|---|
| State | New |
| Headers | show |
| Series | [v4,1/3] dt-bindings: reset: syscon-reboot: Add priority property | expand |
Reminder: Any plan how to handle these patches? On Monday 26 December 2022 12:45:11 Pali Rohár wrote: > This new optional priority property allows to specify custom priority level > of reset device. Prior this change priority level was hardcoded to 192 and > not possible to specify or change. Specifying other value is needed for > some boards. Default level when not specified stays at 192 as before. > > Signed-off-by: Pali Rohár <pali@kernel.org> > > --- > Changes in v4: > * Use restart-handler.yaml > > Changes in v3: > * Add explanation into commit message > > Changes in v2: > * Change sint32 to int32 > * Add default > --- > .../devicetree/bindings/power/reset/syscon-reboot.yaml | 6 ++++++ > 1 file changed, 6 insertions(+) > > diff --git a/Documentation/devicetree/bindings/power/reset/syscon-reboot.yaml b/Documentation/devicetree/bindings/power/reset/syscon-reboot.yaml > index da2509724812..f721bdf63a98 100644 > --- a/Documentation/devicetree/bindings/power/reset/syscon-reboot.yaml > +++ b/Documentation/devicetree/bindings/power/reset/syscon-reboot.yaml > @@ -19,6 +19,9 @@ description: |+ > sub-node of a "syscon", "simple-mfd" node. Though the regmap property > pointing to the system controller node is also supported. > > +allOf: > + - $ref: restart-handler.yaml# > + > properties: > compatible: > const: syscon-reboot > @@ -42,6 +45,9 @@ properties: > $ref: /schemas/types.yaml#/definitions/uint32 > description: The reset value written to the reboot register (32 bit access). > > + priority: > + default: 192 > + > required: > - compatible > - offset > -- > 2.20.1 >
diff --git a/Documentation/devicetree/bindings/power/reset/syscon-reboot.yaml b/Documentation/devicetree/bindings/power/reset/syscon-reboot.yaml index da2509724812..f721bdf63a98 100644 --- a/Documentation/devicetree/bindings/power/reset/syscon-reboot.yaml +++ b/Documentation/devicetree/bindings/power/reset/syscon-reboot.yaml @@ -19,6 +19,9 @@ description: |+ sub-node of a "syscon", "simple-mfd" node. Though the regmap property pointing to the system controller node is also supported. +allOf: + - $ref: restart-handler.yaml# + properties: compatible: const: syscon-reboot @@ -42,6 +45,9 @@ properties: $ref: /schemas/types.yaml#/definitions/uint32 description: The reset value written to the reboot register (32 bit access). + priority: + default: 192 + required: - compatible - offset
This new optional priority property allows to specify custom priority level of reset device. Prior this change priority level was hardcoded to 192 and not possible to specify or change. Specifying other value is needed for some boards. Default level when not specified stays at 192 as before. Signed-off-by: Pali Rohár <pali@kernel.org> --- Changes in v4: * Use restart-handler.yaml Changes in v3: * Add explanation into commit message Changes in v2: * Change sint32 to int32 * Add default --- .../devicetree/bindings/power/reset/syscon-reboot.yaml | 6 ++++++ 1 file changed, 6 insertions(+)