@@ -22,6 +22,8 @@ struct rtw_hci_ops {
int (*write_data_rsvd_page)(struct rtw_dev *rtwdev, u8 *buf, u32 size);
int (*write_data_h2c)(struct rtw_dev *rtwdev, u8 *buf, u32 size);
+ void (*power_switch)(struct rtw_dev *rtwdev, bool on);
+
u8 (*read8)(struct rtw_dev *rtwdev, u32 addr);
u16 (*read16)(struct rtw_dev *rtwdev, u32 addr);
u32 (*read32)(struct rtw_dev *rtwdev, u32 addr);
@@ -84,6 +86,12 @@ rtw_hci_write_data_h2c(struct rtw_dev *rtwdev, u8 *buf, u32 size)
return rtwdev->hci.ops->write_data_h2c(rtwdev, buf, size);
}
+static inline void rtw_hci_power_switch(struct rtw_dev *rtwdev, bool on)
+{
+ if (rtwdev->hci.ops->power_switch)
+ rtwdev->hci.ops->power_switch(rtwdev, on);
+}
+
static inline u8 rtw_read8(struct rtw_dev *rtwdev, u32 addr)
{
return rtwdev->hci.ops->read8(rtwdev, addr);
@@ -269,10 +269,18 @@ static int rtw_mac_power_switch(struct rtw_dev *rtwdev, bool pwr_on)
if (pwr_on == cur_pwr)
return -EALREADY;
+ /* Always signal power off before power sequence. This way
+ * read/write functions will take path which works in both
+ * states. State will change in the middle of the sequence.
+ */
+ rtw_hci_power_switch(rtwdev, false);
+
pwr_seq = pwr_on ? chip->pwr_on_seq : chip->pwr_off_seq;
if (rtw_pwr_seq_parser(rtwdev, pwr_seq))
return -EINVAL;
+ rtw_hci_power_switch(rtwdev, pwr_on);
+
return 0;
}
32-bit SDIO bus reads/writes only work when the card is powered on. Add an optional power_switch() callback to struct rtw_hci_ops where we inform the HCI sub-driver that the chip is now powered on. Based on this information the upcoming SDIO HCI implementation can then use the appropriate 32-bit read/write accessors. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> --- drivers/net/wireless/realtek/rtw88/hci.h | 8 ++++++++ drivers/net/wireless/realtek/rtw88/mac.c | 8 ++++++++ 2 files changed, 16 insertions(+)