| Message ID | 20230103074318.3146070-1-alexander.stein@ew.tq-group.com |
|---|---|
| State | New |
| Headers | show |
| Series | [v3,1/2] arm64: dts: tqma8m*: Fix temperature sensor compatible | expand |
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-tqma8mqml.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-tqma8mqml.dtsi index 88d89cd46c74..b4466a26d838 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-tqma8mqml.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mm-tqma8mqml.dtsi @@ -87,8 +87,8 @@ &i2c1 { sda-gpios = <&gpio5 15 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; status = "okay"; - sensor0: temperature-sensor-eeprom@1b { - compatible = "nxp,se97", "jedec,jc-42.4-temp"; + sensor0: temperature-sensor@1b { + compatible = "nxp,se97b", "jedec,jc-42.4-temp"; reg = <0x1b>; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mn-tqma8mqnl.dtsi b/arch/arm64/boot/dts/freescale/imx8mn-tqma8mqnl.dtsi index 48b965386e87..391ca5516e4c 100644 --- a/arch/arm64/boot/dts/freescale/imx8mn-tqma8mqnl.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mn-tqma8mqnl.dtsi @@ -77,8 +77,8 @@ &i2c1 { sda-gpios = <&gpio5 15 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; status = "okay"; - sensor0: temperature-sensor-eeprom@1b { - compatible = "nxp,se97", "jedec,jc-42.4-temp"; + sensor0: temperature-sensor@1b { + compatible = "nxp,se97b", "jedec,jc-42.4-temp"; reg = <0x1b>; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl.dts b/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl.dts index 25cbe333ab8f..34b62d8c76a0 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl.dts +++ b/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl.dts @@ -510,9 +510,8 @@ tlv320aic3x04: audio-codec@18 { ldoin-supply = <®_vcc_3v3>; }; - /* NXP SE97BTP with temperature sensor + eeprom */ - se97_1c: temperature-sensor-eeprom@1c { - compatible = "nxp,se97", "jedec,jc-42.4-temp"; + se97_1c: temperature-sensor@1c { + compatible = "nxp,se97b", "jedec,jc-42.4-temp"; reg = <0x1c>; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql.dtsi index 7bd680a926ce..ebc29a950ba9 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql.dtsi @@ -63,9 +63,8 @@ &i2c1 { sda-gpios = <&gpio5 15 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; status = "okay"; - /* NXP SE97BTP with temperature sensor + eeprom */ - se97: temperature-sensor-eeprom@1b { - compatible = "nxp,se97", "jedec,jc-42.4-temp"; + se97: temperature-sensor@1b { + compatible = "nxp,se97b", "jedec,jc-42.4-temp"; reg = <0x1b>; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mq-tqma8mq.dtsi b/arch/arm64/boot/dts/freescale/imx8mq-tqma8mq.dtsi index 9a95e30fb42d..5ca6b2252546 100644 --- a/arch/arm64/boot/dts/freescale/imx8mq-tqma8mq.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mq-tqma8mq.dtsi @@ -194,8 +194,8 @@ vgen6_reg: vgen6 { }; }; - sensor0: temperature-sensor-eeprom@1b { - compatible = "nxp,se97", "jedec,jc-42.4-temp"; + sensor0: temperature-sensor@1b { + compatible = "nxp,se97b", "jedec,jc-42.4-temp"; reg = <0x1b>; }; diff --git a/arch/arm64/boot/dts/freescale/mba8mx.dtsi b/arch/arm64/boot/dts/freescale/mba8mx.dtsi index 3283af9888cf..d41f75b53bde 100644 --- a/arch/arm64/boot/dts/freescale/mba8mx.dtsi +++ b/arch/arm64/boot/dts/freescale/mba8mx.dtsi @@ -283,8 +283,8 @@ tlv320aic3x04: audio-codec@18 { ldoin-supply = <®_vcc_3v3>; }; - sensor1: sensor@1f { - compatible = "nxp,se97", "jedec,jc-42.4-temp"; + sensor1: temperator-sensor@1f { + compatible = "nxp,se97b", "jedec,jc-42.4-temp"; reg = <0x1f>; };
Use the correct compatible 'nxp,se97b' as it is an SE97BTP chip. While at it, fix the node name according to device tree spec recommendations. The EEPROM is a separate node anyway. Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> --- Changes in v3: * Squashed into a single patch arch/arm64/boot/dts/freescale/imx8mm-tqma8mqml.dtsi | 4 ++-- arch/arm64/boot/dts/freescale/imx8mn-tqma8mqnl.dtsi | 4 ++-- arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl.dts | 5 ++--- arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql.dtsi | 5 ++--- arch/arm64/boot/dts/freescale/imx8mq-tqma8mq.dtsi | 4 ++-- arch/arm64/boot/dts/freescale/mba8mx.dtsi | 4 ++-- 6 files changed, 12 insertions(+), 14 deletions(-)