diff mbox series

[RESEND,v3,1/4] dt-bindings: clock: qcom,sc7280-lpasscc: Add qcom,adsp-pil-mode property

Message ID 1672849297-3116-2-git-send-email-quic_srivasam@quicinc.com
State Superseded
Headers show
Series [RESEND,v3,1/4] dt-bindings: clock: qcom,sc7280-lpasscc: Add qcom,adsp-pil-mode property | expand

Commit Message

Srinivasa Rao Mandadapu Jan. 4, 2023, 4:21 p.m. UTC 
When this property is set, the remoteproc is used to boot the
LPASS and therefore qdsp6ss clocks would be used to bring LPASS
out of reset, hence they are directly controlled by the remoteproc.

This is a cleanup done to handle overlap of regmap of lpasscc
and adsp remoteproc blocks.

Signed-off-by: Srinivasa Rao Mandadapu <quic_srivasam@quicinc.com>
Tested-by: Mohammad Rafi Shaik <quic_mohs@quicinc.com>
---
 Documentation/devicetree/bindings/clock/qcom,sc7280-lpasscc.yaml | 7 +++++++
 1 file changed, 7 insertions(+)

Comments

Krzysztof Kozlowski Jan. 10, 2023, 10:55 a.m. UTC | #1 
On 04/01/2023 17:21, Srinivasa Rao Mandadapu wrote:
> When this property is set, the remoteproc is used to boot the
> LPASS and therefore qdsp6ss clocks would be used to bring LPASS
> out of reset, hence they are directly controlled by the remoteproc.
> 
> This is a cleanup done to handle overlap of regmap of lpasscc
> and adsp remoteproc blocks.
> 
> Signed-off-by: Srinivasa Rao Mandadapu <quic_srivasam@quicinc.com>
> Tested-by: Mohammad Rafi Shaik <quic_mohs@quicinc.com>
> ---


Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

Best regards,
Krzysztof
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/clock/qcom,sc7280-lpasscc.yaml b/Documentation/devicetree/bindings/clock/qcom,sc7280-lpasscc.yaml
index 6151fde..97c6bd9 100644
--- a/Documentation/devicetree/bindings/clock/qcom,sc7280-lpasscc.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,sc7280-lpasscc.yaml
@@ -41,6 +41,12 @@  properties:
       - const: qdsp6ss
       - const: top_cc
 
+  qcom,adsp-pil-mode:
+    description:
+      Indicates if the LPASS would be brought out of reset using
+      remoteproc peripheral loader.
+    type: boolean
+
 required:
   - compatible
   - reg
@@ -60,6 +66,7 @@  examples:
       reg-names = "qdsp6ss", "top_cc";
       clocks = <&gcc GCC_CFG_NOC_LPASS_CLK>;
       clock-names = "iface";
+      qcom,adsp-pil-mode;
       #clock-cells = <1>;
     };
 ...