| Message ID | 20230109174511.1740856-10-brgl@bgdev.pl |
|---|---|
| State | New |
| Headers | show |
| Series | arm64: qcom: add support for sa8775p-ride | expand |
On 09/01/2023 18:45, Bartosz Golaszewski wrote: > From: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> > > Add DT bindings for the TLMM controller on sa8775p platforms. Subject: drop second/last, redundant "bindings for". The "dt-bindings" prefix is already stating that these are bindings. > > Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> > --- > .../bindings/pinctrl/qcom,sa8775p-tlmm.yaml | 142 ++++++++++++++++++ > 1 file changed, 142 insertions(+) > create mode 100644 Documentation/devicetree/bindings/pinctrl/qcom,sa8775p-tlmm.yaml > > diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sa8775p-tlmm.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sa8775p-tlmm.yaml > new file mode 100644 > index 000000000000..44abf83b1358 > --- /dev/null > +++ b/Documentation/devicetree/bindings/pinctrl/qcom,sa8775p-tlmm.yaml > @@ -0,0 +1,142 @@ > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/pinctrl/qcom,sa8775p-tlmm.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Qualcomm Technologies, Inc. SA8775P TLMM block > + > +maintainers: > + - Bartosz Golaszewski <bartosz.golaszewski@linaro.org> > + > +description: | > + Top Level Mode Multiplexer pin controller in Qualcomm SA8775P SoC. > + > +allOf: > + - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml# > + > +properties: > + compatible: > + const: qcom,sa8775p-tlmm > + > + reg: > + maxItems: 1 > + > + interrupts: true > + interrupt-controller: true > + "#interrupt-cells": true > + gpio-controller: true > + "#gpio-cells": true > + gpio-ranges: true Add also gpio-reserved-ranges with min/maxItems (see for example sm8450) and gpio-line-names with maxItems. > + > +required: > + - compatible > + - reg > + > +additionalProperties: false > + > +patternProperties: > + "-state$": > + oneOf: > + - $ref: "#/$defs/qcom-sa8775p-tlmm-state" > + - patternProperties: > + "-pins$": > + $ref: "#/$defs/qcom-sa8775p-tlmm-state" > + additionalProperties: false > + > +$defs: > + qcom-sa8775p-tlmm-state: > + type: object > + description: > + Pinctrl node's client devices use subnodes for desired pin configuration. > + Client device subnodes use below standard properties. > + $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state > + > + properties: > + pins: > + description: > + List of gpio pins affected by the properties specified in this > + subnode. > + items: > + oneOf: > + - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-9][0-9]|2[0-1][0-9]|22[0-7])$" > + - enum: [ sdc1_rclk, sdc1_clk, sdc1_cmd, sdc1_data, ufs_reset ] Contents of this enum is sorted usually by name (not always, but we try for new bindings) > + minItems: 1 > + maxItems: 16 > + > + function: > + description: > + Specify the alternative function to be configured for the specified > + pins. > + > + enum: [ atest_char, atest_char0, atest_char1, atest_char2, > + atest_char3, atest_usb2, atest_usb20, atest_usb21, atest_usb22, > + atest_usb23, audio_ref, cam_mclk, cci_async, cci_i2c, > + cci_timer0, cci_timer1, cci_timer2, cci_timer3, cci_timer4, > + cci_timer5, cci_timer6, cci_timer7, cci_timer8, cci_timer9, > + cri_trng, cri_trng0, cri_trng1, dbg_out, ddr_bist, ddr_pxi0, > + ddr_pxi1, ddr_pxi2, ddr_pxi3, ddr_pxi4, ddr_pxi5, edp0_hot, > + edp0_lcd, edp1_hot, edp1_lcd, edp2_hot, edp2_lcd, edp3_hot, > + edp3_lcd, emac0_mcg0, emac0_mcg1, emac0_mcg2, emac0_mcg3, > + emac0_mdc, emac0_mdio, emac0_ptp, emac1_mcg0, emac1_mcg1, > + emac1_mcg2, emac1_mcg3, emac1_mdc, emac1_mdio, emac1_ptp, > + gcc_gp1, gcc_gp2, gcc_gp3, gcc_gp4, gcc_gp5, hs0_mi2s, hs1_mi2s, > + hs2_mi2s, ibi_i3c, jitter_bist, mdp0_vsync0, mdp0_vsync1, > + mdp0_vsync2, mdp0_vsync3, mdp0_vsync4, mdp0_vsync5, mdp0_vsync6, > + mdp0_vsync7, mdp0_vsync8, mdp1_vsync0, mdp1_vsync1, mdp1_vsync2, > + mdp1_vsync3, mdp1_vsync4, mdp1_vsync5, mdp1_vsync6, mdp1_vsync7, > + mdp1_vsync8, mdp_vsync, mi2s1_data0, mi2s1_data1, mi2s1_sck, > + mi2s1_ws, mi2s2_data0, mi2s2_data1, mi2s2_sck, mi2s2_ws, > + mi2s_mclk0, mi2s_mclk1, pcie0_clkreq, pcie1_clkreq, phase_flag0, > + phase_flag1, phase_flag10, phase_flag11, phase_flag12, > + phase_flag13, phase_flag14, phase_flag15, phase_flag16, > + phase_flag17, phase_flag18, phase_flag19, phase_flag2, > + phase_flag20, phase_flag21, phase_flag22, phase_flag23, > + phase_flag24, phase_flag25, phase_flag26, phase_flag27, > + phase_flag28, phase_flag29, phase_flag3, phase_flag30, > + phase_flag31, phase_flag4, phase_flag5, phase_flag6, > + phase_flag7, phase_flag8, phase_flag9, pll_bist, pll_clk, > + prng_rosc0, prng_rosc1, prng_rosc2, prng_rosc3, qdss_cti, > + qdss_gpio, qdss_gpio0, qdss_gpio1, qdss_gpio10, qdss_gpio11, > + qdss_gpio12, qdss_gpio13, qdss_gpio14, qdss_gpio15, qdss_gpio2, > + qdss_gpio3, qdss_gpio4, qdss_gpio5, qdss_gpio6, qdss_gpio7, > + qdss_gpio8, qdss_gpio9, qup0_se0, qup0_se1, qup0_se2, qup0_se3, > + qup0_se4, qup0_se5, qup1_se0, qup1_se1, qup1_se2, qup1_se3, > + qup1_se4, qup1_se5, qup1_se6, qup2_se0, qup2_se1, qup2_se2, > + qup2_se3, qup2_se4, qup2_se5, qup2_se6, qup3_se0, sail_top, > + sailss_emac0, sailss_ospi, sgmii_phy, tb_trig, tgu_ch0, tgu_ch1, > + tgu_ch2, tgu_ch3, tgu_ch4, tgu_ch5, tsense_pwm1, tsense_pwm2, > + tsense_pwm3, tsense_pwm4, usb2phy_ac, vsense_trigger] Missing space before ] > + > + bias-disable: true > + bias-pull-down: true > + bias-pull-up: true > + drive-strength: true > + input-enable: true > + output-high: true > + output-low: true > + > + required: > + - pins > + > + additionalProperties: false > + > +examples: > + - | > + #include <dt-bindings/interrupt-controller/arm-gic.h> > + tlmm: pinctrl@f000000 { > + compatible = "qcom,sa8775p-pinctrl"; > + reg = <0xf000000 0x1000000>; > + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; > + gpio-controller; > + #gpio-cells = <2>; > + interrupt-controller; > + #interrupt-cells = <2>; > + gpio-ranges = <&tlmm 0 0 149>; Why only 149? > + > + qup_uart10_state { No underscores in node names.. which points to next one: Does not look like you tested the bindings. Please run `make dt_binding_check` (see Documentation/devicetree/bindings/writing-schema.rst for instructions). Best regards, Krzysztof
On Mon, Jan 09, 2023 at 06:45:02PM +0100, Bartosz Golaszewski wrote: > From: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> > > Add DT bindings for the TLMM controller on sa8775p platforms. > > Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> > --- > .../bindings/pinctrl/qcom,sa8775p-tlmm.yaml | 142 ++++++++++++++++++ > 1 file changed, 142 insertions(+) > create mode 100644 Documentation/devicetree/bindings/pinctrl/qcom,sa8775p-tlmm.yaml > > diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sa8775p-tlmm.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sa8775p-tlmm.yaml > new file mode 100644 > index 000000000000..44abf83b1358 > --- /dev/null > +++ b/Documentation/devicetree/bindings/pinctrl/qcom,sa8775p-tlmm.yaml > @@ -0,0 +1,142 @@ > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/pinctrl/qcom,sa8775p-tlmm.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Qualcomm Technologies, Inc. SA8775P TLMM block > + > +maintainers: > + - Bartosz Golaszewski <bartosz.golaszewski@linaro.org> > + > +description: | > + Top Level Mode Multiplexer pin controller in Qualcomm SA8775P SoC. > + > +allOf: > + - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml# > + > +properties: > + compatible: > + const: qcom,sa8775p-tlmm > + > + reg: > + maxItems: 1 > + > + interrupts: true > + interrupt-controller: true > + "#interrupt-cells": true > + gpio-controller: true > + "#gpio-cells": true > + gpio-ranges: true > + > +required: > + - compatible > + - reg > + > +additionalProperties: false > + > +patternProperties: > + "-state$": > + oneOf: > + - $ref: "#/$defs/qcom-sa8775p-tlmm-state" > + - patternProperties: > + "-pins$": > + $ref: "#/$defs/qcom-sa8775p-tlmm-state" > + additionalProperties: false > + > +$defs: > + qcom-sa8775p-tlmm-state: > + type: object > + description: > + Pinctrl node's client devices use subnodes for desired pin configuration. > + Client device subnodes use below standard properties. > + $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state > + > + properties: > + pins: > + description: > + List of gpio pins affected by the properties specified in this > + subnode. > + items: > + oneOf: > + - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-9][0-9]|2[0-1][0-9]|22[0-7])$" Per the driver, this should be "^gpio([0-9]|[1-9][0-9]|1[0-3][0-9]|14[0-8])$" Regards, Bjorn > + - enum: [ sdc1_rclk, sdc1_clk, sdc1_cmd, sdc1_data, ufs_reset ] > + minItems: 1 > + maxItems: 16 > + > + function: > + description: > + Specify the alternative function to be configured for the specified > + pins. > + > + enum: [ atest_char, atest_char0, atest_char1, atest_char2, > + atest_char3, atest_usb2, atest_usb20, atest_usb21, atest_usb22, > + atest_usb23, audio_ref, cam_mclk, cci_async, cci_i2c, > + cci_timer0, cci_timer1, cci_timer2, cci_timer3, cci_timer4, > + cci_timer5, cci_timer6, cci_timer7, cci_timer8, cci_timer9, > + cri_trng, cri_trng0, cri_trng1, dbg_out, ddr_bist, ddr_pxi0, > + ddr_pxi1, ddr_pxi2, ddr_pxi3, ddr_pxi4, ddr_pxi5, edp0_hot, > + edp0_lcd, edp1_hot, edp1_lcd, edp2_hot, edp2_lcd, edp3_hot, > + edp3_lcd, emac0_mcg0, emac0_mcg1, emac0_mcg2, emac0_mcg3, > + emac0_mdc, emac0_mdio, emac0_ptp, emac1_mcg0, emac1_mcg1, > + emac1_mcg2, emac1_mcg3, emac1_mdc, emac1_mdio, emac1_ptp, > + gcc_gp1, gcc_gp2, gcc_gp3, gcc_gp4, gcc_gp5, hs0_mi2s, hs1_mi2s, > + hs2_mi2s, ibi_i3c, jitter_bist, mdp0_vsync0, mdp0_vsync1, > + mdp0_vsync2, mdp0_vsync3, mdp0_vsync4, mdp0_vsync5, mdp0_vsync6, > + mdp0_vsync7, mdp0_vsync8, mdp1_vsync0, mdp1_vsync1, mdp1_vsync2, > + mdp1_vsync3, mdp1_vsync4, mdp1_vsync5, mdp1_vsync6, mdp1_vsync7, > + mdp1_vsync8, mdp_vsync, mi2s1_data0, mi2s1_data1, mi2s1_sck, > + mi2s1_ws, mi2s2_data0, mi2s2_data1, mi2s2_sck, mi2s2_ws, > + mi2s_mclk0, mi2s_mclk1, pcie0_clkreq, pcie1_clkreq, phase_flag0, > + phase_flag1, phase_flag10, phase_flag11, phase_flag12, > + phase_flag13, phase_flag14, phase_flag15, phase_flag16, > + phase_flag17, phase_flag18, phase_flag19, phase_flag2, > + phase_flag20, phase_flag21, phase_flag22, phase_flag23, > + phase_flag24, phase_flag25, phase_flag26, phase_flag27, > + phase_flag28, phase_flag29, phase_flag3, phase_flag30, > + phase_flag31, phase_flag4, phase_flag5, phase_flag6, > + phase_flag7, phase_flag8, phase_flag9, pll_bist, pll_clk, > + prng_rosc0, prng_rosc1, prng_rosc2, prng_rosc3, qdss_cti, > + qdss_gpio, qdss_gpio0, qdss_gpio1, qdss_gpio10, qdss_gpio11, > + qdss_gpio12, qdss_gpio13, qdss_gpio14, qdss_gpio15, qdss_gpio2, > + qdss_gpio3, qdss_gpio4, qdss_gpio5, qdss_gpio6, qdss_gpio7, > + qdss_gpio8, qdss_gpio9, qup0_se0, qup0_se1, qup0_se2, qup0_se3, > + qup0_se4, qup0_se5, qup1_se0, qup1_se1, qup1_se2, qup1_se3, > + qup1_se4, qup1_se5, qup1_se6, qup2_se0, qup2_se1, qup2_se2, > + qup2_se3, qup2_se4, qup2_se5, qup2_se6, qup3_se0, sail_top, > + sailss_emac0, sailss_ospi, sgmii_phy, tb_trig, tgu_ch0, tgu_ch1, > + tgu_ch2, tgu_ch3, tgu_ch4, tgu_ch5, tsense_pwm1, tsense_pwm2, > + tsense_pwm3, tsense_pwm4, usb2phy_ac, vsense_trigger] > + > + bias-disable: true > + bias-pull-down: true > + bias-pull-up: true > + drive-strength: true > + input-enable: true > + output-high: true > + output-low: true > + > + required: > + - pins > + > + additionalProperties: false > + > +examples: > + - | > + #include <dt-bindings/interrupt-controller/arm-gic.h> > + tlmm: pinctrl@f000000 { > + compatible = "qcom,sa8775p-pinctrl"; > + reg = <0xf000000 0x1000000>; > + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; > + gpio-controller; > + #gpio-cells = <2>; > + interrupt-controller; > + #interrupt-cells = <2>; > + gpio-ranges = <&tlmm 0 0 149>; > + > + qup_uart10_state { > + pins = "gpio46", "gpio47"; > + function = "qup1_se3"; > + }; > + }; > +... > -- > 2.37.2 >
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sa8775p-tlmm.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sa8775p-tlmm.yaml new file mode 100644 index 000000000000..44abf83b1358 --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/qcom,sa8775p-tlmm.yaml @@ -0,0 +1,142 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/qcom,sa8775p-tlmm.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Technologies, Inc. SA8775P TLMM block + +maintainers: + - Bartosz Golaszewski <bartosz.golaszewski@linaro.org> + +description: | + Top Level Mode Multiplexer pin controller in Qualcomm SA8775P SoC. + +allOf: + - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml# + +properties: + compatible: + const: qcom,sa8775p-tlmm + + reg: + maxItems: 1 + + interrupts: true + interrupt-controller: true + "#interrupt-cells": true + gpio-controller: true + "#gpio-cells": true + gpio-ranges: true + +required: + - compatible + - reg + +additionalProperties: false + +patternProperties: + "-state$": + oneOf: + - $ref: "#/$defs/qcom-sa8775p-tlmm-state" + - patternProperties: + "-pins$": + $ref: "#/$defs/qcom-sa8775p-tlmm-state" + additionalProperties: false + +$defs: + qcom-sa8775p-tlmm-state: + type: object + description: + Pinctrl node's client devices use subnodes for desired pin configuration. + Client device subnodes use below standard properties. + $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state + + properties: + pins: + description: + List of gpio pins affected by the properties specified in this + subnode. + items: + oneOf: + - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-9][0-9]|2[0-1][0-9]|22[0-7])$" + - enum: [ sdc1_rclk, sdc1_clk, sdc1_cmd, sdc1_data, ufs_reset ] + minItems: 1 + maxItems: 16 + + function: + description: + Specify the alternative function to be configured for the specified + pins. + + enum: [ atest_char, atest_char0, atest_char1, atest_char2, + atest_char3, atest_usb2, atest_usb20, atest_usb21, atest_usb22, + atest_usb23, audio_ref, cam_mclk, cci_async, cci_i2c, + cci_timer0, cci_timer1, cci_timer2, cci_timer3, cci_timer4, + cci_timer5, cci_timer6, cci_timer7, cci_timer8, cci_timer9, + cri_trng, cri_trng0, cri_trng1, dbg_out, ddr_bist, ddr_pxi0, + ddr_pxi1, ddr_pxi2, ddr_pxi3, ddr_pxi4, ddr_pxi5, edp0_hot, + edp0_lcd, edp1_hot, edp1_lcd, edp2_hot, edp2_lcd, edp3_hot, + edp3_lcd, emac0_mcg0, emac0_mcg1, emac0_mcg2, emac0_mcg3, + emac0_mdc, emac0_mdio, emac0_ptp, emac1_mcg0, emac1_mcg1, + emac1_mcg2, emac1_mcg3, emac1_mdc, emac1_mdio, emac1_ptp, + gcc_gp1, gcc_gp2, gcc_gp3, gcc_gp4, gcc_gp5, hs0_mi2s, hs1_mi2s, + hs2_mi2s, ibi_i3c, jitter_bist, mdp0_vsync0, mdp0_vsync1, + mdp0_vsync2, mdp0_vsync3, mdp0_vsync4, mdp0_vsync5, mdp0_vsync6, + mdp0_vsync7, mdp0_vsync8, mdp1_vsync0, mdp1_vsync1, mdp1_vsync2, + mdp1_vsync3, mdp1_vsync4, mdp1_vsync5, mdp1_vsync6, mdp1_vsync7, + mdp1_vsync8, mdp_vsync, mi2s1_data0, mi2s1_data1, mi2s1_sck, + mi2s1_ws, mi2s2_data0, mi2s2_data1, mi2s2_sck, mi2s2_ws, + mi2s_mclk0, mi2s_mclk1, pcie0_clkreq, pcie1_clkreq, phase_flag0, + phase_flag1, phase_flag10, phase_flag11, phase_flag12, + phase_flag13, phase_flag14, phase_flag15, phase_flag16, + phase_flag17, phase_flag18, phase_flag19, phase_flag2, + phase_flag20, phase_flag21, phase_flag22, phase_flag23, + phase_flag24, phase_flag25, phase_flag26, phase_flag27, + phase_flag28, phase_flag29, phase_flag3, phase_flag30, + phase_flag31, phase_flag4, phase_flag5, phase_flag6, + phase_flag7, phase_flag8, phase_flag9, pll_bist, pll_clk, + prng_rosc0, prng_rosc1, prng_rosc2, prng_rosc3, qdss_cti, + qdss_gpio, qdss_gpio0, qdss_gpio1, qdss_gpio10, qdss_gpio11, + qdss_gpio12, qdss_gpio13, qdss_gpio14, qdss_gpio15, qdss_gpio2, + qdss_gpio3, qdss_gpio4, qdss_gpio5, qdss_gpio6, qdss_gpio7, + qdss_gpio8, qdss_gpio9, qup0_se0, qup0_se1, qup0_se2, qup0_se3, + qup0_se4, qup0_se5, qup1_se0, qup1_se1, qup1_se2, qup1_se3, + qup1_se4, qup1_se5, qup1_se6, qup2_se0, qup2_se1, qup2_se2, + qup2_se3, qup2_se4, qup2_se5, qup2_se6, qup3_se0, sail_top, + sailss_emac0, sailss_ospi, sgmii_phy, tb_trig, tgu_ch0, tgu_ch1, + tgu_ch2, tgu_ch3, tgu_ch4, tgu_ch5, tsense_pwm1, tsense_pwm2, + tsense_pwm3, tsense_pwm4, usb2phy_ac, vsense_trigger] + + bias-disable: true + bias-pull-down: true + bias-pull-up: true + drive-strength: true + input-enable: true + output-high: true + output-low: true + + required: + - pins + + additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + tlmm: pinctrl@f000000 { + compatible = "qcom,sa8775p-pinctrl"; + reg = <0xf000000 0x1000000>; + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-ranges = <&tlmm 0 0 149>; + + qup_uart10_state { + pins = "gpio46", "gpio47"; + function = "qup1_se3"; + }; + }; +...