| Message ID | 1458544605-1930-1-git-send-email-maxim.uvarov@linaro.org |
|---|---|
| State | New |
| Headers | show |
We need to note that you must run that script from the root of ODP and not in the scripts dir, I tried that and it failed to find ./bootstrap When I do run from the root dir I get the following make[2]: Entering directory '/home/mike/git/odp/test/performance' CCLD odp_crypto ../../lib/.libs/libodp.a(io_ops.o):(.rodata+0x8): undefined reference to `pcap_pktio_ops' collect2: error: ld returned 1 exit status Makefile:704: recipe for target 'odp_crypto' failed make[2]: *** [odp_crypto] Error 1 make[2]: Leaving directory '/home/mike/git/odp/test/performance' Makefile:412: recipe for target 'all-recursive' failed make[1]: *** [all-recursive] Error 1 make[1]: Leaving directory '/home/mike/git/odp/test' Makefile:464: recipe for target 'all-recursive' failed make: *** [all-recursive] Error 1 However the dependencies don't list anything about pcap to run this script, should the script test for pcap support ? 3.4.1 Building DPDK and ODP with DPDK pktio support DPDK packet I/O has been tested to work with DPDK v2.2.0. Follow steps in ./scripts/build-pktio-dpdk On 21 March 2016 at 03:16, Maxim Uvarov <maxim.uvarov@linaro.org> wrote: > Add script to quickly build odp with dpdk pktio support. > > Signed-off-by: Maxim Uvarov <maxim.uvarov@linaro.org> > --- > .gitignore | 1 + > scripts/build-pktio-dpdk | 26 ++++++++++++++++++++++++++ > 2 files changed, 27 insertions(+) > create mode 100755 scripts/build-pktio-dpdk > > diff --git a/.gitignore b/.gitignore > index b4c146b..4945d25 100644 > --- a/.gitignore > +++ b/.gitignore > @@ -31,6 +31,7 @@ core > cscope.out > depcomp > doc/output > +dpdk/ > install-sh > lib/ > libtool > diff --git a/scripts/build-pktio-dpdk b/scripts/build-pktio-dpdk > new file mode 100755 > index 0000000..bcc00b0 > --- /dev/null > +++ b/scripts/build-pktio-dpdk > @@ -0,0 +1,26 @@ > +#!/bin/bash > + > +TARGET=${TARGET:-"x86_64-native-linuxapp-gcc"} > + > +git clone http://dpdk.org/git/dpdk dpdk > +pushd dpdk > +git checkout -b bv2.2.0 v2.2.0 > + > +#Make and edit DPDK configuration > +make config T=${TARGET} O=${TARGET} > +pushd x86_64-native-linuxapp-gcc > +sed -ri 's,(CONFIG_RTE_BUILD_COMBINE_LIBS=).*,\1y,' .config > +#To use I/O without DPDK supported NIC's enable pcap pmd: > +sed -ri 's,(CONFIG_RTE_LIBRTE_PMD_PCAP=).*,\1y,' .config > +popd > + > +#Build DPDK > +make install T=${TARGET} EXTRA_CFLAGS="-fPIC" > +popd > + > +#Build ODP > +./bootstrap; > +./configure --enable-test-vald --enable-test-perf --enable-test-cpp \ > + --enable-debug --enable-debug-print \ > + --with-dpdk-path=`pwd`/dpdk/${TARGET} > +make > -- > 2.7.1.250.gff4ea60 > > _______________________________________________ > lng-odp mailing list > lng-odp@lists.linaro.org > https://lists.linaro.org/mailman/listinfo/lng-odp > -- Mike Holmes Technical Manager - Linaro Networking Group Linaro.org <http://www.linaro.org/> *│ *Open source software for ARM SoCs "Work should be fun and collaborative, the rest follows"
On 23 March 2016 at 13:22, Nikolay Nikolaev < n.nikolaev@virtualopensystems.com> wrote: > > > On Wed, Mar 23, 2016 at 6:44 PM, Mike Holmes <mike.holmes@linaro.org> > wrote: > >> We need to note that you must run that script from the root of ODP and >> not in the scripts dir, I tried that and it failed to find ./bootstrap >> >> When I do run from the root dir I get the following >> >> make[2]: Entering directory '/home/mike/git/odp/test/performance' >> CCLD odp_crypto >> ../../lib/.libs/libodp.a(io_ops.o):(.rodata+0x8): undefined reference to >> `pcap_pktio_ops' >> collect2: error: ld returned 1 exit status >> Makefile:704: recipe for target 'odp_crypto' failed >> make[2]: *** [odp_crypto] Error 1 >> make[2]: Leaving directory '/home/mike/git/odp/test/performance' >> Makefile:412: recipe for target 'all-recursive' failed >> make[1]: *** [all-recursive] Error 1 >> make[1]: Leaving directory '/home/mike/git/odp/test' >> Makefile:464: recipe for target 'all-recursive' failed >> make: *** [all-recursive] Error 1 >> >> >> However the dependencies don't list anything about pcap to run this >> script, should the script test for pcap support ? >> > From personal experience it might be worth download and compile a static > pcap library, but maybe that is too much for this script. > I can't get this to fail the same way now, I think it may have been damaged by running the script from the script dir first possibly ? > > regards, > Nikolay Nikolaev > >> >> 3.4.1 Building DPDK and ODP with DPDK pktio support >> >> DPDK packet I/O has been tested to work with DPDK v2.2.0. >> >> Follow steps in ./scripts/build-pktio-dpdk >> >> >> >> >> On 21 March 2016 at 03:16, Maxim Uvarov <maxim.uvarov@linaro.org> wrote: >> >>> Add script to quickly build odp with dpdk pktio support. >>> >>> Signed-off-by: Maxim Uvarov <maxim.uvarov@linaro.org> >>> --- >>> .gitignore | 1 + >>> scripts/build-pktio-dpdk | 26 ++++++++++++++++++++++++++ >>> 2 files changed, 27 insertions(+) >>> create mode 100755 scripts/build-pktio-dpdk >>> >>> diff --git a/.gitignore b/.gitignore >>> index b4c146b..4945d25 100644 >>> --- a/.gitignore >>> +++ b/.gitignore >>> @@ -31,6 +31,7 @@ core >>> cscope.out >>> depcomp >>> doc/output >>> +dpdk/ >>> install-sh >>> lib/ >>> libtool >>> diff --git a/scripts/build-pktio-dpdk b/scripts/build-pktio-dpdk >>> new file mode 100755 >>> index 0000000..bcc00b0 >>> --- /dev/null >>> +++ b/scripts/build-pktio-dpdk >>> @@ -0,0 +1,26 @@ >>> +#!/bin/bash >>> + >>> +TARGET=${TARGET:-"x86_64-native-linuxapp-gcc"} >>> + >>> +git clone http://dpdk.org/git/dpdk dpdk >>> +pushd dpdk >>> +git checkout -b bv2.2.0 v2.2.0 >>> + >>> +#Make and edit DPDK configuration >>> +make config T=${TARGET} O=${TARGET} >>> +pushd x86_64-native-linuxapp-gcc >>> +sed -ri 's,(CONFIG_RTE_BUILD_COMBINE_LIBS=).*,\1y,' .config >>> +#To use I/O without DPDK supported NIC's enable pcap pmd: >>> +sed -ri 's,(CONFIG_RTE_LIBRTE_PMD_PCAP=).*,\1y,' .config >>> +popd >>> + >>> +#Build DPDK >>> +make install T=${TARGET} EXTRA_CFLAGS="-fPIC" >>> +popd >>> + >>> +#Build ODP >>> +./bootstrap; >>> +./configure --enable-test-vald --enable-test-perf --enable-test-cpp \ >>> + --enable-debug --enable-debug-print \ >>> + --with-dpdk-path=`pwd`/dpdk/${TARGET} >>> +make >>> -- >>> 2.7.1.250.gff4ea60 >>> >>> _______________________________________________ >>> lng-odp mailing list >>> lng-odp@lists.linaro.org >>> https://lists.linaro.org/mailman/listinfo/lng-odp >>> >> >> >> >> -- >> Mike Holmes >> Technical Manager - Linaro Networking Group >> Linaro.org <http://www.linaro.org/> *│ *Open source software for ARM SoCs >> "Work should be fun and collaborative, the rest follows" >> >> >> >> _______________________________________________ >> lng-odp mailing list >> lng-odp@lists.linaro.org >> https://lists.linaro.org/mailman/listinfo/lng-odp >> >> > -- Mike Holmes Technical Manager - Linaro Networking Group Linaro.org <http://www.linaro.org/> *│ *Open source software for ARM SoCs "Work should be fun and collaborative, the rest follows"
On 23 March 2016 at 14:30, Mike Holmes <mike.holmes@linaro.org> wrote: > > > On 23 March 2016 at 13:22, Nikolay Nikolaev < > n.nikolaev@virtualopensystems.com> wrote: > >> >> >> On Wed, Mar 23, 2016 at 6:44 PM, Mike Holmes <mike.holmes@linaro.org> >> wrote: >> >>> We need to note that you must run that script from the root of ODP and >>> not in the scripts dir, I tried that and it failed to find ./bootstrap >>> >>> When I do run from the root dir I get the following >>> >>> make[2]: Entering directory '/home/mike/git/odp/test/performance' >>> CCLD odp_crypto >>> ../../lib/.libs/libodp.a(io_ops.o):(.rodata+0x8): undefined reference to >>> `pcap_pktio_ops' >>> collect2: error: ld returned 1 exit status >>> Makefile:704: recipe for target 'odp_crypto' failed >>> make[2]: *** [odp_crypto] Error 1 >>> make[2]: Leaving directory '/home/mike/git/odp/test/performance' >>> Makefile:412: recipe for target 'all-recursive' failed >>> make[1]: *** [all-recursive] Error 1 >>> make[1]: Leaving directory '/home/mike/git/odp/test' >>> Makefile:464: recipe for target 'all-recursive' failed >>> make: *** [all-recursive] Error 1 >>> >>> >>> However the dependencies don't list anything about pcap to run this >>> script, should the script test for pcap support ? >>> >> From personal experience it might be worth download and compile a static >> pcap library, but maybe that is too much for this script. >> > > I can't get this to fail the same way now, I think it may have been > damaged by running the script from the script dir first possibly ? > > >> >> regards, >> Nikolay Nikolaev >> >>> >>> 3.4.1 Building DPDK and ODP with DPDK pktio support >>> >>> DPDK packet I/O has been tested to work with DPDK v2.2.0. >>> >>> Follow steps in ./scripts/build-pktio-dpdk >>> >>> >>> >>> >>> On 21 March 2016 at 03:16, Maxim Uvarov <maxim.uvarov@linaro.org> wrote: >>> >>>> Add script to quickly build odp with dpdk pktio support. >>>> >>>> Signed-off-by: Maxim Uvarov <maxim.uvarov@linaro.org> >>>> --- >>>> .gitignore | 1 + >>>> scripts/build-pktio-dpdk | 26 ++++++++++++++++++++++++++ >>>> 2 files changed, 27 insertions(+) >>>> create mode 100755 scripts/build-pktio-dpdk >>>> >>>> diff --git a/.gitignore b/.gitignore >>>> index b4c146b..4945d25 100644 >>>> --- a/.gitignore >>>> +++ b/.gitignore >>>> @@ -31,6 +31,7 @@ core >>>> cscope.out >>>> depcomp >>>> doc/output >>>> +dpdk/ >>>> install-sh >>>> lib/ >>>> libtool >>>> diff --git a/scripts/build-pktio-dpdk b/scripts/build-pktio-dpdk >>>> new file mode 100755 >>>> index 0000000..bcc00b0 >>>> --- /dev/null >>>> +++ b/scripts/build-pktio-dpdk >>>> @@ -0,0 +1,26 @@ >>>> +#!/bin/bash >>>> + >>>> +TARGET=${TARGET:-"x86_64-native-linuxapp-gcc"} >>>> + >>>> +git clone http://dpdk.org/git/dpdk dpdk >>>> +pushd dpdk >>>> +git checkout -b bv2.2.0 v2.2.0 >>>> + >>>> +#Make and edit DPDK configuration >>>> +make config T=${TARGET} O=${TARGET} >>>> +pushd x86_64-native-linuxapp-gcc >>>> +sed -ri 's,(CONFIG_RTE_BUILD_COMBINE_LIBS=).*,\1y,' .config >>>> +#To use I/O without DPDK supported NIC's enable pcap pmd: >>>> +sed -ri 's,(CONFIG_RTE_LIBRTE_PMD_PCAP=).*,\1y,' .config >>>> +popd >>>> + >>>> +#Build DPDK >>>> +make install T=${TARGET} EXTRA_CFLAGS="-fPIC" >>>> +popd >>>> + >>>> +#Build ODP >>>> +./bootstrap; >>>> +./configure --enable-test-vald --enable-test-perf --enable-test-cpp \ >>>> + --enable-debug --enable-debug-print \ >>>> + --with-dpdk-path=`pwd`/dpdk/${TARGET} >>>> >>> Opps ./configure --help ... --with-netmap-path=DIR path to netmap root directory (or in the default path if not specified). --with-dpdk-path=DIR path to dpdk build directory (or in the default path if not specified). --with-sdk-install-path=DIR path to external libs and headers (or in the default path if not specified). ... I think that we meant to use with-sdk-install-path every time and drop with-dpdk-path, with-netmap-path > +make >>>> -- >>>> 2.7.1.250.gff4ea60 >>>> >>>> _______________________________________________ >>>> lng-odp mailing list >>>> lng-odp@lists.linaro.org >>>> https://lists.linaro.org/mailman/listinfo/lng-odp >>>> >>> >>> >>> >>> -- >>> Mike Holmes >>> Technical Manager - Linaro Networking Group >>> Linaro.org <http://www.linaro.org/> *│ *Open source software for ARM >>> SoCs >>> "Work should be fun and collaborative, the rest follows" >>> >>> >>> >>> _______________________________________________ >>> lng-odp mailing list >>> lng-odp@lists.linaro.org >>> https://lists.linaro.org/mailman/listinfo/lng-odp >>> >>> >> > > > -- > Mike Holmes > Technical Manager - Linaro Networking Group > Linaro.org <http://www.linaro.org/> *│ *Open source software for ARM SoCs > "Work should be fun and collaborative, the rest follows" > > > -- Mike Holmes Technical Manager - Linaro Networking Group Linaro.org <http://www.linaro.org/> *│ *Open source software for ARM SoCs "Work should be fun and collaborative, the rest follows"
On 03/23/16 21:39, Mike Holmes wrote: > > > On 23 March 2016 at 14:30, Mike Holmes <mike.holmes@linaro.org > <mailto:mike.holmes@linaro.org>> wrote: > > > > On 23 March 2016 at 13:22, Nikolay Nikolaev > <n.nikolaev@virtualopensystems.com > <mailto:n.nikolaev@virtualopensystems.com>> wrote: > > > > On Wed, Mar 23, 2016 at 6:44 PM, Mike Holmes > <mike.holmes@linaro.org <mailto:mike.holmes@linaro.org>> wrote: > > We need to note that you must run that script from the > root of ODP and not in the scripts dir, I tried that and > it failed to find ./bootstrap > > When I do run from the root dir I get the following > > make[2]: Entering directory > '/home/mike/git/odp/test/performance' > CCLD odp_crypto > ../../lib/.libs/libodp.a(io_ops.o):(.rodata+0x8): > undefined reference to `pcap_pktio_ops' > collect2: error: ld returned 1 exit status > Makefile:704: recipe for target 'odp_crypto' failed > make[2]: *** [odp_crypto] Error 1 > make[2]: Leaving directory > '/home/mike/git/odp/test/performance' > Makefile:412: recipe for target 'all-recursive' failed > make[1]: *** [all-recursive] Error 1 > make[1]: Leaving directory '/home/mike/git/odp/test' > Makefile:464: recipe for target 'all-recursive' failed > make: *** [all-recursive] Error 1 > > > However the dependencies don't list anything about pcap > to run this script, should the script test for pcap support ? > > From personal experience it might be worth download and > compile a static pcap library, but maybe that is too much for > this script. > > > I can't get this to fail the same way now, I think it may have > been damaged by running the script from the script dir first > possibly ? > > > regards, > Nikolay Nikolaev > > > 3.4.1 Building DPDK and ODP with DPDK pktio support > > DPDK packet I/O has been tested to work with DPDK v2.2.0. > > Follow steps in ./scripts/build-pktio-dpdk > > > > > On 21 March 2016 at 03:16, Maxim Uvarov > <maxim.uvarov@linaro.org <mailto:maxim.uvarov@linaro.org>> > wrote: > > Add script to quickly build odp with dpdk pktio support. > > Signed-off-by: Maxim Uvarov <maxim.uvarov@linaro.org > <mailto:maxim.uvarov@linaro.org>> > --- > .gitignore | 1 + > scripts/build-pktio-dpdk | 26 ++++++++++++++++++++++++++ > 2 files changed, 27 insertions(+) > create mode 100755 scripts/build-pktio-dpdk > > diff --git a/.gitignore b/.gitignore > index b4c146b..4945d25 100644 > --- a/.gitignore > +++ b/.gitignore > @@ -31,6 +31,7 @@ core > cscope.out > depcomp > doc/output > +dpdk/ > install-sh > lib/ > libtool > diff --git a/scripts/build-pktio-dpdk > b/scripts/build-pktio-dpdk > new file mode 100755 > index 0000000..bcc00b0 > --- /dev/null > +++ b/scripts/build-pktio-dpdk > @@ -0,0 +1,26 @@ > +#!/bin/bash > + > +TARGET=${TARGET:-"x86_64-native-linuxapp-gcc"} > + > +git clone http://dpdk.org/git/dpdk dpdk > +pushd dpdk > +git checkout -b bv2.2.0 v2.2.0 > + > +#Make and edit DPDK configuration > +make config T=${TARGET} O=${TARGET} > +pushd x86_64-native-linuxapp-gcc > +sed -ri 's,(CONFIG_RTE_BUILD_COMBINE_LIBS=).*,\1y,' > .config > +#To use I/O without DPDK supported NIC's enable pcap pmd: > +sed -ri 's,(CONFIG_RTE_LIBRTE_PMD_PCAP=).*,\1y,' .config > +popd > + > +#Build DPDK > +make install T=${TARGET} EXTRA_CFLAGS="-fPIC" > +popd > + > +#Build ODP > +./bootstrap; > +./configure --enable-test-vald --enable-test-perf > --enable-test-cpp \ > + --enable-debug --enable-debug-print \ > + --with-dpdk-path=`pwd`/dpdk/${TARGET} > > > Opps > > ./configure --help > ... > --with-netmap-path=DIR path to netmap root directory > (or in the default path if not specified). > --with-dpdk-path=DIR path to dpdk build directory > (or in the default path if not specified). > --with-sdk-install-path=DIR path to external libs and headers > (or in the default path if not specified). > ... > > I think that we meant to use with-sdk-install-path every time and drop > with-dpdk-path, with-netmap-path > for odp-dpdk or other platform. For linux-generic it's different types if pktio. You can enable both netmap and dpdk. Maxim. > +make > -- > 2.7.1.250.gff4ea60 > > _______________________________________________ > lng-odp mailing list > lng-odp@lists.linaro.org <mailto:lng-odp@lists.linaro.org> > https://lists.linaro.org/mailman/listinfo/lng-odp > > > > > -- > Mike Holmes > Technical Manager - Linaro Networking Group > Linaro.org <http://www.linaro.org/>***│ *Open source > software for ARM SoCs > "Work should be fun and collaborative, the rest follows" > > > _______________________________________________ > lng-odp mailing list > lng-odp@lists.linaro.org <mailto:lng-odp@lists.linaro.org> > https://lists.linaro.org/mailman/listinfo/lng-odp > > > > > > -- > Mike Holmes > Technical Manager - Linaro Networking Group > Linaro.org <http://www.linaro.org/>***│ *Open source software for > ARM SoCs > "Work should be fun and collaborative, the rest follows" > > > > > -- > Mike Holmes > Technical Manager - Linaro Networking Group > Linaro.org <http://www.linaro.org/>***│ *Open source software for ARM SoCs > "Work should be fun and collaborative, the rest follows" >
On 23 March 2016 at 15:10, Maxim Uvarov <maxim.uvarov@linaro.org> wrote: > On 03/23/16 21:39, Mike Holmes wrote: > >> >> >> On 23 March 2016 at 14:30, Mike Holmes <mike.holmes@linaro.org <mailto: >> mike.holmes@linaro.org>> wrote: >> >> >> >> On 23 March 2016 at 13:22, Nikolay Nikolaev >> <n.nikolaev@virtualopensystems.com >> <mailto:n.nikolaev@virtualopensystems.com>> wrote: >> >> >> >> On Wed, Mar 23, 2016 at 6:44 PM, Mike Holmes >> <mike.holmes@linaro.org <mailto:mike.holmes@linaro.org>> wrote: >> >> We need to note that you must run that script from the >> root of ODP and not in the scripts dir, I tried that and >> it failed to find ./bootstrap >> >> When I do run from the root dir I get the following >> >> make[2]: Entering directory >> '/home/mike/git/odp/test/performance' >> CCLD odp_crypto >> ../../lib/.libs/libodp.a(io_ops.o):(.rodata+0x8): >> undefined reference to `pcap_pktio_ops' >> collect2: error: ld returned 1 exit status >> Makefile:704: recipe for target 'odp_crypto' failed >> make[2]: *** [odp_crypto] Error 1 >> make[2]: Leaving directory >> '/home/mike/git/odp/test/performance' >> Makefile:412: recipe for target 'all-recursive' failed >> make[1]: *** [all-recursive] Error 1 >> make[1]: Leaving directory '/home/mike/git/odp/test' >> Makefile:464: recipe for target 'all-recursive' failed >> make: *** [all-recursive] Error 1 >> >> >> However the dependencies don't list anything about pcap >> to run this script, should the script test for pcap support ? >> >> From personal experience it might be worth download and >> compile a static pcap library, but maybe that is too much for >> this script. >> >> >> I can't get this to fail the same way now, I think it may have >> been damaged by running the script from the script dir first >> possibly ? >> >> >> regards, >> Nikolay Nikolaev >> >> >> 3.4.1 Building DPDK and ODP with DPDK pktio support >> >> DPDK packet I/O has been tested to work with DPDK v2.2.0. >> >> Follow steps in ./scripts/build-pktio-dpdk >> >> >> >> >> On 21 March 2016 at 03:16, Maxim Uvarov >> <maxim.uvarov@linaro.org <mailto:maxim.uvarov@linaro.org>> >> wrote: >> >> Add script to quickly build odp with dpdk pktio support. >> >> Signed-off-by: Maxim Uvarov <maxim.uvarov@linaro.org >> <mailto:maxim.uvarov@linaro.org>> >> >> --- >> .gitignore | 1 + >> scripts/build-pktio-dpdk | 26 ++++++++++++++++++++++++++ >> 2 files changed, 27 insertions(+) >> create mode 100755 scripts/build-pktio-dpdk >> >> diff --git a/.gitignore b/.gitignore >> index b4c146b..4945d25 100644 >> --- a/.gitignore >> +++ b/.gitignore >> @@ -31,6 +31,7 @@ core >> cscope.out >> depcomp >> doc/output >> +dpdk/ >> install-sh >> lib/ >> libtool >> diff --git a/scripts/build-pktio-dpdk >> b/scripts/build-pktio-dpdk >> new file mode 100755 >> index 0000000..bcc00b0 >> --- /dev/null >> +++ b/scripts/build-pktio-dpdk >> @@ -0,0 +1,26 @@ >> +#!/bin/bash >> + >> +TARGET=${TARGET:-"x86_64-native-linuxapp-gcc"} >> + >> +git clone http://dpdk.org/git/dpdk dpdk >> +pushd dpdk >> +git checkout -b bv2.2.0 v2.2.0 >> + >> +#Make and edit DPDK configuration >> +make config T=${TARGET} O=${TARGET} >> +pushd x86_64-native-linuxapp-gcc >> +sed -ri 's,(CONFIG_RTE_BUILD_COMBINE_LIBS=).*,\1y,' >> .config >> +#To use I/O without DPDK supported NIC's enable pcap pmd: >> +sed -ri 's,(CONFIG_RTE_LIBRTE_PMD_PCAP=).*,\1y,' .config >> +popd >> + >> +#Build DPDK >> +make install T=${TARGET} EXTRA_CFLAGS="-fPIC" >> +popd >> + >> +#Build ODP >> +./bootstrap; >> +./configure --enable-test-vald --enable-test-perf >> --enable-test-cpp \ >> + --enable-debug --enable-debug-print \ >> + --with-dpdk-path=`pwd`/dpdk/${TARGET} >> >> >> Opps >> >> ./configure --help >> ... >> --with-netmap-path=DIR path to netmap root directory >> (or in the default path if not specified). >> --with-dpdk-path=DIR path to dpdk build directory >> (or in the default path if not specified). >> --with-sdk-install-path=DIR path to external libs and headers >> (or in the default path if not specified). >> ... >> >> I think that we meant to use with-sdk-install-path every time and drop >> with-dpdk-path, with-netmap-path >> >> > for odp-dpdk or other platform. > > For linux-generic it's different types if pktio. You can enable both > netmap and dpdk. > Is that really a use case that exists ? Netmap serves a subset of the NICs DPDK supports and I dont think there is a Netmap NIC that DPDK doe not support ? I dont think you will ever use these in parallel, Petri you have experience here, what have you found ? Mike > > Maxim. > > > +make >> -- >> 2.7.1.250.gff4ea60 >> >> _______________________________________________ >> lng-odp mailing list >> lng-odp@lists.linaro.org <mailto:lng-odp@lists.linaro.org >> > >> https://lists.linaro.org/mailman/listinfo/lng-odp >> >> >> >> >> -- Mike Holmes >> Technical Manager - Linaro Networking Group >> Linaro.org <http://www.linaro.org/>***│ *Open source >> software for ARM SoCs >> "Work should be fun and collaborative, the rest follows" >> >> >> _______________________________________________ >> lng-odp mailing list >> lng-odp@lists.linaro.org <mailto:lng-odp@lists.linaro.org> >> https://lists.linaro.org/mailman/listinfo/lng-odp >> >> >> >> >> >> -- Mike Holmes >> Technical Manager - Linaro Networking Group >> Linaro.org <http://www.linaro.org/>***│ *Open source software for >> ARM SoCs >> "Work should be fun and collaborative, the rest follows" >> >> >> >> >> -- >> Mike Holmes >> Technical Manager - Linaro Networking Group >> Linaro.org <http://www.linaro.org/>***│ *Open source software for ARM >> SoCs >> "Work should be fun and collaborative, the rest follows" >> >> > -- Mike Holmes Technical Manager - Linaro Networking Group Linaro.org <http://www.linaro.org/> *│ *Open source software for ARM SoCs "Work should be fun and collaborative, the rest follows"
> > SNIP >>> >> ....... > --- >>> .gitignore | 1 + >>> scripts/build-pktio-dpdk | 26 ++++++++++++++++++++++++++ >>> 2 files changed, 27 insertions(+) >>> create mode 100755 scripts/build-pktio-dpdk >>> >>> diff --git a/.gitignore b/.gitignore >>> index b4c146b..4945d25 100644 >>> --- a/.gitignore >>> +++ b/.gitignore >>> @@ -31,6 +31,7 @@ core >>> cscope.out >>> depcomp >>> doc/output >>> +dpdk/ >>> install-sh >>> lib/ >>> libtool >>> diff --git a/scripts/build-pktio-dpdk >>> b/scripts/build-pktio-dpdk >>> new file mode 100755 >>> index 0000000..bcc00b0 >>> --- /dev/null >>> +++ b/scripts/build-pktio-dpdk >>> @@ -0,0 +1,26 @@ >>> +#!/bin/bash >>> + >>> +TARGET=${TARGET:-"x86_64-native-linuxapp-gcc"} >>> >> Need to use $ARCH or similar for building on ARM > + >>> +git clone http://dpdk.org/git/dpdk dpdk >>> +pushd dpdk >>> +git checkout -b bv2.2.0 v2.2.0 >>> + >>> +#Make and edit DPDK configuration >>> +make config T=${TARGET} O=${TARGET} >>> +pushd x86_64-native-linuxapp-gcc >>> >> https://projects.linaro.org/browse/ODP-312 has been fixed and ODP-DPDK should build on AARch64 so this path will not make sence on a non X86 - as suggested by Anders we should make this be $TARGET > +sed -ri 's,(CONFIG_RTE_BUILD_COMBINE_LIBS=).*,\1y,' >>> .config >>> +#To use I/O without DPDK supported NIC's enable pcap >>> pmd: >>> +sed -ri 's,(CONFIG_RTE_LIBRTE_PMD_PCAP=).*,\1y,' .config >>> +popd >>> + >>> +#Build DPDK >>> +make install T=${TARGET} EXTRA_CFLAGS="-fPIC" >>> +popd >>> + >>> +#Build ODP >>> +./bootstrap; >>> +./configure --enable-test-vald --enable-test-perf >>> --enable-test-cpp \ >>> + --enable-debug --enable-debug-print \ >>> + --with-dpdk-path=`pwd`/dpdk/${TARGET} >>> s a Netmap NIC that DPDK doe not support ? >>> >> > ......... > SNIP >
diff --git a/.gitignore b/.gitignore index b4c146b..4945d25 100644 --- a/.gitignore +++ b/.gitignore @@ -31,6 +31,7 @@ core cscope.out depcomp doc/output +dpdk/ install-sh lib/ libtool diff --git a/scripts/build-pktio-dpdk b/scripts/build-pktio-dpdk new file mode 100755 index 0000000..bcc00b0 --- /dev/null +++ b/scripts/build-pktio-dpdk @@ -0,0 +1,26 @@ +#!/bin/bash + +TARGET=${TARGET:-"x86_64-native-linuxapp-gcc"} + +git clone http://dpdk.org/git/dpdk dpdk +pushd dpdk +git checkout -b bv2.2.0 v2.2.0 + +#Make and edit DPDK configuration +make config T=${TARGET} O=${TARGET} +pushd x86_64-native-linuxapp-gcc +sed -ri 's,(CONFIG_RTE_BUILD_COMBINE_LIBS=).*,\1y,' .config +#To use I/O without DPDK supported NIC's enable pcap pmd: +sed -ri 's,(CONFIG_RTE_LIBRTE_PMD_PCAP=).*,\1y,' .config +popd + +#Build DPDK +make install T=${TARGET} EXTRA_CFLAGS="-fPIC" +popd + +#Build ODP +./bootstrap; +./configure --enable-test-vald --enable-test-perf --enable-test-cpp \ + --enable-debug --enable-debug-print \ + --with-dpdk-path=`pwd`/dpdk/${TARGET} +make
Add script to quickly build odp with dpdk pktio support. Signed-off-by: Maxim Uvarov <maxim.uvarov@linaro.org> --- .gitignore | 1 + scripts/build-pktio-dpdk | 26 ++++++++++++++++++++++++++ 2 files changed, 27 insertions(+) create mode 100755 scripts/build-pktio-dpdk