| Message ID | 20230109174511.1740856-19-brgl@bgdev.pl |
|---|---|
| State | New |
| Headers | show |
| Series | arm64: qcom: add support for sa8775p-ride | expand |
On 1/9/2023 10:34 AM, Krzysztof Kozlowski wrote: > On 09/01/2023 18:45, Bartosz Golaszewski wrote: >> From: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> >> >> This adds basic support for the Qualcomm sa8775p platform and the >> reference board: sa8775p-ride. The dt files describe the basics of the >> SoC and enable booting to shell. >> >> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> >> --- >> arch/arm64/boot/dts/qcom/Makefile | 1 + >> arch/arm64/boot/dts/qcom/sa8775p-ride.dts | 39 + >> arch/arm64/boot/dts/qcom/sa8775p.dtsi | 841 ++++++++++++++++++++++ >> 3 files changed, 881 insertions(+) >> create mode 100644 arch/arm64/boot/dts/qcom/sa8775p-ride.dts >> create mode 100644 arch/arm64/boot/dts/qcom/sa8775p.dtsi >> >> diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile >> index 3e79496292e7..39b8206f7131 100644 >> --- a/arch/arm64/boot/dts/qcom/Makefile >> +++ b/arch/arm64/boot/dts/qcom/Makefile >> @@ -61,6 +61,7 @@ dtb-$(CONFIG_ARCH_QCOM) += qrb5165-rb5-vision-mezzanine.dtb >> dtb-$(CONFIG_ARCH_QCOM) += sa8155p-adp.dtb >> dtb-$(CONFIG_ARCH_QCOM) += sa8295p-adp.dtb >> dtb-$(CONFIG_ARCH_QCOM) += sa8540p-ride.dtb >> +dtb-$(CONFIG_ARCH_QCOM) += sa8775p-ride.dtb >> dtb-$(CONFIG_ARCH_QCOM) += sc7180-idp.dtb >> dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-coachz-r1.dtb >> dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-coachz-r1-lte.dtb >> diff --git a/arch/arm64/boot/dts/qcom/sa8775p-ride.dts b/arch/arm64/boot/dts/qcom/sa8775p-ride.dts >> new file mode 100644 >> index 000000000000..d4dae32a84cc >> --- /dev/null >> +++ b/arch/arm64/boot/dts/qcom/sa8775p-ride.dts >> @@ -0,0 +1,39 @@ >> +// SPDX-License-Identifier: GPL-2.0-only >> +/* >> + * Copyright (c) 2023, Linaro Limited >> + */ >> + >> +/dts-v1/; >> + >> +#include "sa8775p.dtsi" >> + >> +/ { >> + model = "Qualcomm SA8875P Ride"; >> + compatible = "qcom,sa8775p-ride", "qcom,sa8775p"; >> + >> + aliases { >> + serial0 = &uart10; >> + }; >> + >> + chosen { >> + stdout-path = "serial0:115200n8"; >> + }; >> +}; >> + >> +&qupv3_id_1 { >> + status = "okay"; >> +}; >> + >> +&uart10 { >> + compatible = "qcom,geni-debug-uart"; >> + status = "okay"; >> + pinctrl-names = "default"; >> + pinctrl-0 = <&qup_uart10_state>; >> +}; >> + >> +&tlmm { >> + qup_uart10_state: qup_uart10_state { > > Does not look like you tested the DTS against bindings. Please run `make > dtbs_check` (see Documentation/devicetree/bindings/writing-schema.rst > for instructions). > >> + pins = "gpio46", "gpio47"; >> + function = "qup1_se3"; >> + }; >> +}; >> diff --git a/arch/arm64/boot/dts/qcom/sa8775p.dtsi b/arch/arm64/boot/dts/qcom/sa8775p.dtsi >> new file mode 100644 >> index 000000000000..1a3b11628e38 >> --- /dev/null >> +++ b/arch/arm64/boot/dts/qcom/sa8775p.dtsi >> @@ -0,0 +1,841 @@ >> +// SPDX-License-Identifier: GPL-2.0-only > > Why GPL-2.0-only? Isn't this based on other code which is either > dual-licensed or BSD license? > >> +/* >> + * Copyright (c) 2023, Linaro Limited >> + */ >> + >> +#include <dt-bindings/interrupt-controller/arm-gic.h> >> +#include <dt-bindings/clock/qcom,gcc-sa8775p.h> >> +#include <dt-bindings/clock/qcom,rpmh.h> >> +#include <dt-bindings/interconnect/qcom,sa8775p.h> >> +#include <dt-bindings/power/qcom-rpmpd.h> >> +#include <dt-bindings/soc/qcom,rpmh-rsc.h> >> + >> +/ { >> + interrupt-parent = <&intc>; >> + >> + #address-cells = <2>; >> + #size-cells = <2>; >> + >> + clocks { >> + xo_board_clk: xo-board-clk { >> + compatible = "fixed-clock"; >> + #clock-cells = <0>; > > Your board needs clock frequency. > >> + }; >> + >> + sleep_clk: sleep-clk { >> + compatible = "fixed-clock"; >> + #clock-cells = <0>; >> + clock-frequency = <32764>; > > Usual comment: this (entire clock or at least its frequency) is usually > not a property of a SoC, but board. Did something change here in SA8775? > > >> + }; >> + }; >> + >> + cpus { >> + #address-cells = <2>; >> + #size-cells = <0>; >> + >> + CPU0: cpu@0 { >> + device_type = "cpu"; >> + compatible = "qcom,kryo"; >> + reg = <0x0 0x0>; >> + enable-method = "psci"; >> + next-level-cache = <&L2_0>; >> + L2_0: l2-cache { >> + compatible = "cache"; >> + next-level-cache = <&L3_0>; > > Messed indentation. > >> + L3_0: l3-cache { >> + compatible = "cache"; >> + }; >> + }; >> + }; >> + >> + CPU1: cpu@100 { >> + device_type = "cpu"; >> + compatible = "qcom,kryo"; >> + reg = <0x0 0x100>; >> + enable-method = "psci"; >> + cpu-release-addr = <0x0 0x90000000>; >> + next-level-cache = <&L2_1>; >> + L2_1: l2-cache { >> + compatible = "cache"; >> + next-level-cache = <&L3_0>; >> + }; >> + }; >> + >> + CPU2: cpu@200 { >> + device_type = "cpu"; >> + compatible = "qcom,kryo"; >> + reg = <0x0 0x200>; >> + enable-method = "psci"; >> + next-level-cache = <&L2_2>; >> + L2_2: l2-cache { >> + compatible = "cache"; >> + next-level-cache = <&L3_0>; >> + }; >> + }; >> + >> + CPU3: cpu@300 { >> + device_type = "cpu"; >> + compatible = "qcom,kryo"; >> + reg = <0x0 0x300>; >> + enable-method = "psci"; >> + next-level-cache = <&L2_3>; >> + L2_3: l2-cache { >> + compatible = "cache"; >> + next-level-cache = <&L3_0>; >> + }; >> + }; >> + >> + CPU4: cpu@10000 { >> + device_type = "cpu"; >> + compatible = "qcom,kryo"; >> + reg = <0x0 0x10000>; >> + enable-method = "psci"; >> + next-level-cache = <&L2_4>; >> + L2_4: l2-cache { >> + compatible = "cache"; >> + next-level-cache = <&L3_1>; >> + L3_1: l3-cache { >> + compatible = "cache"; >> + }; >> + >> + }; >> + }; >> + >> + CPU5: cpu@10100 { >> + device_type = "cpu"; >> + compatible = "qcom,kryo"; >> + reg = <0x0 0x10100>; >> + enable-method = "psci"; >> + next-level-cache = <&L2_5>; >> + L2_5: l2-cache { >> + compatible = "cache"; >> + next-level-cache = <&L3_1>; >> + }; >> + }; >> + >> + CPU6: cpu@10200 { >> + device_type = "cpu"; >> + compatible = "qcom,kryo"; >> + reg = <0x0 0x10200>; >> + enable-method = "psci"; >> + next-level-cache = <&L2_6>; >> + L2_6: l2-cache { >> + compatible = "cache"; >> + next-level-cache = <&L3_1>; >> + }; >> + }; >> + >> + CPU7: cpu@10300 { >> + device_type = "cpu"; >> + compatible = "qcom,kryo"; >> + reg = <0x0 0x10300>; >> + enable-method = "psci"; >> + next-level-cache = <&L2_7>; >> + L2_7: l2-cache { >> + compatible = "cache"; >> + next-level-cache = <&L3_1>; >> + }; >> + }; >> + >> + cpu-map { >> + cluster0 { >> + core0 { >> + cpu = <&CPU0>; >> + }; >> + >> + core1 { >> + cpu = <&CPU1>; >> + }; >> + >> + core2 { >> + cpu = <&CPU2>; >> + }; >> + >> + core3 { >> + cpu = <&CPU3>; >> + }; >> + }; >> + >> + cluster1 { >> + core0 { >> + cpu = <&CPU4>; >> + }; >> + >> + core1 { >> + cpu = <&CPU5>; >> + }; >> + >> + core2 { >> + cpu = <&CPU6>; >> + }; >> + >> + core3 { >> + cpu = <&CPU7>; >> + }; >> + }; >> + }; >> + }; >> + >> + /* Will be updated by the bootloader. */ >> + memory { >> + device_type = "memory"; >> + reg = <0 0 0 0>; >> + }; >> + >> + reserved-memory { >> + #address-cells = <2>; >> + #size-cells = <2>; >> + ranges; >> + >> + sail_ss_mem: sail_ss_region@80000000 { > > No underscores in node names. > > (...) > >> + >> + qup_opp_table_100mhz: qup-100mhz-opp-table { > > opp-table-.... > > Does not look like you tested the DTS against bindings. Please run `make > dtbs_check` (see Documentation/devicetree/bindings/writing-schema.rst > for instructions). > >> + compatible = "operating-points-v2"; >> + >> + opp-100000000 { >> + opp-hz = /bits/ 64 <100000000>; >> + required-opps = <&rpmhpd_opp_svs_l1>; >> + }; >> + }; >> + >> + soc: soc@0 { >> + compatible = "simple-bus"; >> + #address-cells = <1>; >> + #size-cells = <1>; Can you please update address-cells and size-cells as <2> and update sub nodes accordingly? #address-cells = <2>; #size-cells = <2>; >> + ranges = <0 0 0 0xffffffff>; >> + >> + gcc: clock-controller@100000 { >> + compatible = "qcom,gcc-sa8775p"; >> + reg = <0x100000 0xc7018>; >> + #clock-cells = <1>; >> + #reset-cells = <1>; >> + #power-domain-cells = <1>; >> + clocks = <&rpmhcc RPMH_CXO_CLK>, >> + <&sleep_clk>, >> + <0>, >> + <0>, >> + <0>, >> + <0>, >> + <0>, >> + <0>, >> + <0>, >> + <0>, >> + <0>, /* TODO: usb_0_ssphy */ >> + <0>, >> + <0>, >> + <0>, >> + <0>; >> + power-domains = <&rpmhpd SA8775P_CX>; >> + }; >> + >> + ipcc: mailbox@408000 { >> + compatible = "qcom,sa8775p-ipcc", "qcom,ipcc"; >> + reg = <0x408000 0x1000>; >> + interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>; >> + interrupt-controller; >> + #interrupt-cells = <3>; >> + #mbox-cells = <2>; >> + }; >> + >> + aggre1_noc:interconnect-aggre1-noc { > > Missing space after : > >> + compatible = "qcom,sa8775p-aggre1-noc"; > > This does not match your bindings, so nothing here was tested against > your own files which you sent. > >> + #interconnect-cells = <2>; >> + qcom,bcm-voters = <&apps_bcm_voter>; >> + }; >> + >> + aggre2_noc: interconnect-aggre2-noc { >> + compatible = "qcom,sa8775p-aggre2-noc"; >> + #interconnect-cells = <2>; >> + qcom,bcm-voters = <&apps_bcm_voter>; >> + }; >> + >> + clk_virt: interconnect-clk-virt { >> + compatible = "qcom,sa8775p-clk-virt"; >> + #interconnect-cells = <2>; >> + qcom,bcm-voters = <&apps_bcm_voter>; >> + }; >> + >> + config_noc: interconnect-config-noc { >> + compatible = "qcom,sa8775p-config-noc"; >> + #interconnect-cells = <2>; >> + qcom,bcm-voters = <&apps_bcm_voter>; >> + }; >> + >> + dc_noc: interconnect-dc-noc { >> + compatible = "qcom,sa8775p-dc-noc"; >> + #interconnect-cells = <2>; >> + qcom,bcm-voters = <&apps_bcm_voter>; >> + }; >> + >> + gem_noc: interconnect-gem-noc { >> + compatible = "qcom,sa8775p-gem-noc"; >> + #interconnect-cells = <2>; >> + qcom,bcm-voters = <&apps_bcm_voter>; >> + }; >> + >> + gpdsp_anoc: interconnect-gpdsp-anoc { >> + compatible = "qcom,sa8775p-gpdsp-anoc"; >> + #interconnect-cells = <2>; >> + qcom,bcm-voters = <&apps_bcm_voter>; >> + }; >> + >> + lpass_ag_noc: interconnect-lpass-ag-noc { >> + compatible = "qcom,sa8775p-lpass-ag-noc"; >> + #interconnect-cells = <2>; >> + qcom,bcm-voters = <&apps_bcm_voter>; >> + }; >> + >> + mc_virt: interconnect-mc-virt { >> + compatible = "qcom,sa8775p-mc-virt"; >> + #interconnect-cells = <2>; >> + qcom,bcm-voters = <&apps_bcm_voter>; >> + }; >> + >> + mmss_noc: interconnect-mmss-noc { >> + compatible = "qcom,sa8775p-mmss-noc"; >> + #interconnect-cells = <2>; >> + qcom,bcm-voters = <&apps_bcm_voter>; >> + }; >> + >> + nspa_noc: interconnect-nspa-noc { >> + compatible = "qcom,sa8775p-nspa-noc"; >> + #interconnect-cells = <2>; >> + qcom,bcm-voters = <&apps_bcm_voter>; >> + }; >> + >> + nspb_noc: interconnect-nspb-noc { >> + compatible = "qcom,sa8775p-nspb-noc"; >> + #interconnect-cells = <2>; >> + qcom,bcm-voters = <&apps_bcm_voter>; >> + }; >> + >> + pcie_anoc: interconnect-pcie-anoc { >> + compatible = "qcom,sa8775p-pcie-anoc"; >> + #interconnect-cells = <2>; >> + qcom,bcm-voters = <&apps_bcm_voter>; >> + }; >> + >> + system_noc: interconnect-system-noc { >> + compatible = "qcom,sa8775p-system-noc"; >> + #interconnect-cells = <2>; >> + qcom,bcm-voters = <&apps_bcm_voter>; >> + }; >> + >> + intc: interrupt-controller@17a00000 { >> + compatible = "arm,gic-v3"; >> + #interrupt-cells = <3>; >> + interrupt-controller; >> + #address-cells = <1>; >> + #size-cells = <1>; >> + ranges; >> + #redistributor-regions = <1>; >> + redistributor-stride = <0x0 0x20000>; >> + reg = <0x17a00000 0x10000>, /* GICD */ >> + <0x17a60000 0x100000>; /* GICR * 8 */ > > Compatible goes first, then reg, then ranges. > >> + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; >> + }; >> + >> + apps_rsc: rsc@18200000 { >> + compatible = "qcom,rpmh-rsc"; >> + reg = <0x18200000 0x10000>, >> + <0x18210000 0x10000>, >> + <0x18220000 0x10000>; >> + reg-names = "drv-0", "drv-1", "drv-2"; >> + interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>, >> + <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>, >> + <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>; >> + qcom,tcs-offset = <0xd00>; >> + qcom,drv-id = <2>; >> + qcom,tcs-config = <ACTIVE_TCS 2>, >> + <SLEEP_TCS 3>, >> + <WAKE_TCS 3>, >> + <CONTROL_TCS 0>; >> + label = "apps_rsc"; >> + >> + apps_bcm_voter: bcm_voter { > > Does not look like you tested the DTS against bindings. Please run `make > dtbs_check` (see Documentation/devicetree/bindings/writing-schema.rst > for instructions). > >> + compatible = "qcom,bcm-voter"; >> + }; >> + >> + rpmhcc: clock-controller { >> + compatible = "qcom,sa8775p-rpmh-clk"; >> + #clock-cells = <1>; >> + clock-names = "xo"; >> + clocks = <&xo_board_clk>; >> + }; >> + >> + rpmhpd: power-controller { >> + compatible = "qcom,sa8775p-rpmhpd"; >> + #power-domain-cells = <1>; >> + operating-points-v2 = <&rpmhpd_opp_table>; >> + >> + rpmhpd_opp_table: opp-table { >> + compatible = "operating-points-v2"; >> + >> + rpmhpd_opp_ret: opp1 { > > opp-0 > (so numbering from 0 and hyphen) > >> + opp-level = <RPMH_REGULATOR_LEVEL_RETENTION>; >> + }; >> + >> + rpmhpd_opp_min_svs: opp2 { > > opp-1 > >> + opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>; >> + }; >> + >> + rpmhpd_opp_low_svs: opp3 { >> + opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>; >> + }; >> + >> + rpmhpd_opp_svs: opp4 { >> + opp-level = <RPMH_REGULATOR_LEVEL_SVS>; >> + }; >> + >> + rpmhpd_opp_svs_l1: opp5 { >> + opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>; >> + }; >> + >> + rpmhpd_opp_nom: opp6 { >> + opp-level = <RPMH_REGULATOR_LEVEL_NOM>; >> + }; >> + >> + rpmhpd_opp_nom_l1: opp7 { >> + opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>; >> + }; >> + >> + rpmhpd_opp_nom_l2: opp8 { >> + opp-level = <RPMH_REGULATOR_LEVEL_NOM_L2>; >> + }; >> + >> + rpmhpd_opp_turbo: opp9 { >> + opp-level = <RPMH_REGULATOR_LEVEL_TURBO>; >> + }; >> + >> + rpmhpd_opp_turbo_l1: opp10 { >> + opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>; >> + }; >> + }; >> + }; >> + }; >> + >> + arch_timer: timer { >> + compatible = "arm,armv8-timer"; >> + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, >> + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, >> + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, >> + <GIC_PPI 12 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>; >> + clock-frequency = <19200000>; >> + }; >> + >> + memtimer: timer@17c20000 { > > Why this one is outside of soc node? Or are we inside soc? But then > ARMv8 timer cannot be here... dtbs W=1 would warn you, wouldn't it? > > >> + #address-cells = <1>; >> + #size-cells = <1>; >> + ranges; >> + compatible = "arm,armv7-timer-mem"; > > Weird order of properties. > >> + reg = <0x17c20000 0x1000>; >> + clock-frequency = <19200000>; >> + >> + frame@17c21000 { >> + frame-number = <0>; >> + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, >> + <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; >> + reg = <0x17c21000 0x1000>, >> + <0x17c22000 0x1000>; >> + }; >> + >> + frame@17c23000 { >> + frame-number = <1>; >> + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; >> + reg = <0x17c23000 0x1000>; >> + status = "disabled"; >> + }; >> + >> + frame@17c25000 { >> + frame-number = <2>; >> + interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; >> + reg = <0x17c25000 0x1000>; >> + status = "disabled"; >> + }; >> + >> + frame@17c27000 { >> + frame-number = <3>; >> + interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; >> + reg = <0x17c27000 0x1000>; >> + status = "disabled"; >> + }; >> + >> + frame@17c29000 { >> + frame-number = <4>; >> + interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; >> + reg = <0x17c29000 0x1000>; >> + status = "disabled"; >> + }; >> + >> + frame@17c2b000 { >> + frame-number = <5>; >> + interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; >> + reg = <0x17c2b000 0x1000>; >> + status = "disabled"; >> + }; >> + >> + frame@17c2d000 { >> + frame-number = <6>; >> + interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; >> + reg = <0x17c2d000 0x1000>; >> + status = "disabled"; >> + }; >> + }; >> + >> + tcsr_mutex: hwlock@1f40000 { >> + compatible = "qcom,tcsr-mutex"; >> + reg = <0x1f40000 0x20000>; >> + #hwlock-cells = <1>; >> + }; >> + >> + tlmm: pinctrl@f000000 { >> + compatible = "qcom,sa8775p-pinctrl"; >> + reg = <0xf000000 0x1000000>; >> + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; >> + gpio-controller; >> + #gpio-cells = <2>; >> + interrupt-controller; >> + #interrupt-cells = <2>; >> + gpio-ranges = <&tlmm 0 0 149>; >> + }; >> + >> + qcom-wdt@17c10000 { > > Node names should be generic. > https://devicetree-specification.readthedocs.io/en/latest/chapter2-devicetree-basics.html#generic-names-recommendation > >> + compatible = "qcom,kpss-wdt"; >> + reg = <0x17c10000 0x1000>; >> + clocks = <&sleep_clk>; >> + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>; >> + }; >> + >> + qupv3_id_1: geniqup@ac0000 { >> + compatible = "qcom,geni-se-qup"; >> + reg = <0xac0000 0x6000>; >> + #address-cells = <1>; >> + #size-cells = <1>; >> + ranges; >> + clock-names = "m-ahb", "s-ahb"; >> + clocks = <&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>, >> + <&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>; >> + iommus = <&apps_smmu 0x443 0x0>; >> + status = "disabled"; >> + >> + uart10: serial@a8c000 { >> + compatible = "qcom,geni-uart"; >> + reg = <0xa8c000 0x4000>; >> + interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>; >> + clock-names = "se"; >> + clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>; >> + interconnect-names = "qup-core", "qup-config", "qup-memory"; >> + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, >> + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>, >> + <&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; >> + power-domains = <&rpmhpd SA8775P_CX>; >> + operating-points-v2 = <&qup_opp_table_100mhz>; >> + status = "disabled"; >> + }; >> + }; >> + >> + apps_smmu: apps-smmu@15000000 { > > iommu, node names should be generic. > https://devicetree-specification.readthedocs.io/en/latest/chapter2-devicetree-basics.html#generic-names-recommendation > > and probably also fails dtbs_check... > >> + compatible = "qcom,sa8775p-smmu-500", "arm,mmu-500"; >> + reg = <0x15000000 0x100000>, <0x15182000 0x28>; >> + reg-names = "base", "tcu-base"; >> + #iommu-cells = <2>; >> + qcom,skip-init; >> + qcom,use-3-lvl-tables; >> + #global-interrupts = <2>; >> + #size-cells = <1>; > > Best regards, > Krzysztof > > >
On Mon, Jan 09, 2023 at 06:45:11PM +0100, Bartosz Golaszewski wrote: > From: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> > > This adds basic support for the Qualcomm sa8775p platform and the > reference board: sa8775p-ride. The dt files describe the basics of the > SoC and enable booting to shell. > > Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> > --- > arch/arm64/boot/dts/qcom/Makefile | 1 + > arch/arm64/boot/dts/qcom/sa8775p-ride.dts | 39 + > arch/arm64/boot/dts/qcom/sa8775p.dtsi | 841 ++++++++++++++++++++++ > 3 files changed, 881 insertions(+) > create mode 100644 arch/arm64/boot/dts/qcom/sa8775p-ride.dts > create mode 100644 arch/arm64/boot/dts/qcom/sa8775p.dtsi > > diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile > index 3e79496292e7..39b8206f7131 100644 > --- a/arch/arm64/boot/dts/qcom/Makefile > +++ b/arch/arm64/boot/dts/qcom/Makefile > @@ -61,6 +61,7 @@ dtb-$(CONFIG_ARCH_QCOM) += qrb5165-rb5-vision-mezzanine.dtb > dtb-$(CONFIG_ARCH_QCOM) += sa8155p-adp.dtb > dtb-$(CONFIG_ARCH_QCOM) += sa8295p-adp.dtb > dtb-$(CONFIG_ARCH_QCOM) += sa8540p-ride.dtb > +dtb-$(CONFIG_ARCH_QCOM) += sa8775p-ride.dtb > dtb-$(CONFIG_ARCH_QCOM) += sc7180-idp.dtb > dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-coachz-r1.dtb > dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-coachz-r1-lte.dtb > diff --git a/arch/arm64/boot/dts/qcom/sa8775p-ride.dts b/arch/arm64/boot/dts/qcom/sa8775p-ride.dts > new file mode 100644 > index 000000000000..d4dae32a84cc > --- /dev/null > +++ b/arch/arm64/boot/dts/qcom/sa8775p-ride.dts > @@ -0,0 +1,39 @@ > +// SPDX-License-Identifier: GPL-2.0-only > +/* > + * Copyright (c) 2023, Linaro Limited > + */ > + > +/dts-v1/; > + > +#include "sa8775p.dtsi" > + > +/ { > + model = "Qualcomm SA8875P Ride"; s/SA8875P/SA8775P/ > + compatible = "qcom,sa8775p-ride", "qcom,sa8775p"; > + > + aliases { > + serial0 = &uart10; > + }; > + > + chosen { > + stdout-path = "serial0:115200n8"; > + }; Tested-by: Eric Chanudet <echanude@redhat.com> I could not get past ABL on sa8775p-ride initially. It seems it requires __symbols__ to be in the DTB and looks for at least qcom_tzlog: qcom_tzlog: tz-log@146aa720 { compatible = "qcom,tz-log"; reg = <0x146aa720 0x3000>; qcom,hyplog-enabled; hyplog-address-offset = <0x410>; hyplog-size-offset = <0x414>; }; In addition, an early hang happened without the following work-around: --- a/drivers/firmware/smccc/smccc.c +++ b/drivers/firmware/smccc/smccc.c @@ -23,7 +23,7 @@ void __init arm_smccc_version_init(u32 version, enum arm_smccc_conduit conduit) smccc_version = version; smccc_conduit = conduit; - smccc_trng_available = smccc_probe_trng(); + smccc_trng_available = false /* smccc_probe_trng() */; if (IS_ENABLED(CONFIG_ARM64_SVE) && smccc_version >= ARM_SMCCC_VERSION_1_3) smccc_has_sve_hint = true; This is not related to this patch set directly, I am merely mentioning it in case someone else encounters the issue. > +}; > + > +&qupv3_id_1 { > + status = "okay"; > +}; > + > +&uart10 { > + compatible = "qcom,geni-debug-uart"; > + status = "okay"; > + pinctrl-names = "default"; > + pinctrl-0 = <&qup_uart10_state>; > +}; > + > +&tlmm { > + qup_uart10_state: qup_uart10_state { > + pins = "gpio46", "gpio47"; > + function = "qup1_se3"; > + }; > +}; > diff --git a/arch/arm64/boot/dts/qcom/sa8775p.dtsi b/arch/arm64/boot/dts/qcom/sa8775p.dtsi > new file mode 100644 > index 000000000000..1a3b11628e38 > --- /dev/null > +++ b/arch/arm64/boot/dts/qcom/sa8775p.dtsi > @@ -0,0 +1,841 @@ > +// SPDX-License-Identifier: GPL-2.0-only > +/* > + * Copyright (c) 2023, Linaro Limited > + */ > + > +#include <dt-bindings/interrupt-controller/arm-gic.h> > +#include <dt-bindings/clock/qcom,gcc-sa8775p.h> > +#include <dt-bindings/clock/qcom,rpmh.h> > +#include <dt-bindings/interconnect/qcom,sa8775p.h> > +#include <dt-bindings/power/qcom-rpmpd.h> > +#include <dt-bindings/soc/qcom,rpmh-rsc.h> > + > +/ { > + interrupt-parent = <&intc>; > + > + #address-cells = <2>; > + #size-cells = <2>; > + > + clocks { > + xo_board_clk: xo-board-clk { > + compatible = "fixed-clock"; > + #clock-cells = <0>; > + }; > + > + sleep_clk: sleep-clk { > + compatible = "fixed-clock"; > + #clock-cells = <0>; > + clock-frequency = <32764>; > + }; > + }; > + > + cpus { > + #address-cells = <2>; > + #size-cells = <0>; > + > + CPU0: cpu@0 { > + device_type = "cpu"; > + compatible = "qcom,kryo"; > + reg = <0x0 0x0>; > + enable-method = "psci"; > + next-level-cache = <&L2_0>; > + L2_0: l2-cache { > + compatible = "cache"; > + next-level-cache = <&L3_0>; > + L3_0: l3-cache { > + compatible = "cache"; > + }; > + }; > + }; > + > + CPU1: cpu@100 { > + device_type = "cpu"; > + compatible = "qcom,kryo"; > + reg = <0x0 0x100>; > + enable-method = "psci"; > + cpu-release-addr = <0x0 0x90000000>; > + next-level-cache = <&L2_1>; > + L2_1: l2-cache { > + compatible = "cache"; > + next-level-cache = <&L3_0>; > + }; > + }; > + > + CPU2: cpu@200 { > + device_type = "cpu"; > + compatible = "qcom,kryo"; > + reg = <0x0 0x200>; > + enable-method = "psci"; > + next-level-cache = <&L2_2>; > + L2_2: l2-cache { > + compatible = "cache"; > + next-level-cache = <&L3_0>; > + }; > + }; > + > + CPU3: cpu@300 { > + device_type = "cpu"; > + compatible = "qcom,kryo"; > + reg = <0x0 0x300>; > + enable-method = "psci"; > + next-level-cache = <&L2_3>; > + L2_3: l2-cache { > + compatible = "cache"; > + next-level-cache = <&L3_0>; > + }; > + }; > + > + CPU4: cpu@10000 { > + device_type = "cpu"; > + compatible = "qcom,kryo"; > + reg = <0x0 0x10000>; > + enable-method = "psci"; > + next-level-cache = <&L2_4>; > + L2_4: l2-cache { > + compatible = "cache"; > + next-level-cache = <&L3_1>; > + L3_1: l3-cache { > + compatible = "cache"; > + }; > + > + }; > + }; > + > + CPU5: cpu@10100 { > + device_type = "cpu"; > + compatible = "qcom,kryo"; > + reg = <0x0 0x10100>; > + enable-method = "psci"; > + next-level-cache = <&L2_5>; > + L2_5: l2-cache { > + compatible = "cache"; > + next-level-cache = <&L3_1>; > + }; > + }; > + > + CPU6: cpu@10200 { > + device_type = "cpu"; > + compatible = "qcom,kryo"; > + reg = <0x0 0x10200>; > + enable-method = "psci"; > + next-level-cache = <&L2_6>; > + L2_6: l2-cache { > + compatible = "cache"; > + next-level-cache = <&L3_1>; > + }; > + }; > + > + CPU7: cpu@10300 { > + device_type = "cpu"; > + compatible = "qcom,kryo"; > + reg = <0x0 0x10300>; > + enable-method = "psci"; > + next-level-cache = <&L2_7>; > + L2_7: l2-cache { > + compatible = "cache"; > + next-level-cache = <&L3_1>; > + }; > + }; > + > + cpu-map { > + cluster0 { > + core0 { > + cpu = <&CPU0>; > + }; > + > + core1 { > + cpu = <&CPU1>; > + }; > + > + core2 { > + cpu = <&CPU2>; > + }; > + > + core3 { > + cpu = <&CPU3>; > + }; > + }; > + > + cluster1 { > + core0 { > + cpu = <&CPU4>; > + }; > + > + core1 { > + cpu = <&CPU5>; > + }; > + > + core2 { > + cpu = <&CPU6>; > + }; > + > + core3 { > + cpu = <&CPU7>; > + }; > + }; > + }; > + }; > + > + /* Will be updated by the bootloader. */ > + memory { > + device_type = "memory"; > + reg = <0 0 0 0>; > + }; > + > + reserved-memory { > + #address-cells = <2>; > + #size-cells = <2>; > + ranges; > + > + sail_ss_mem: sail_ss_region@80000000 { > + no-map; > + reg = <0x0 0x80000000 0x0 0x10000000>; > + }; > + > + hyp_mem: hyp_region@90000000 { > + no-map; > + reg = <0x0 0x90000000 0x0 0x600000>; > + }; > + > + xbl_boot_mem: xbl_boot_region@90600000 { > + no-map; > + reg = <0x0 0x90600000 0x0 0x200000>; > + }; > + > + aop_image_mem: aop_image_region@90800000 { > + no-map; > + reg = <0x0 0x90800000 0x0 0x60000>; > + }; > + > + aop_cmd_db_mem: aop_cmd_db_region@90860000 { > + compatible = "qcom,cmd-db"; > + no-map; > + reg = <0x0 0x90860000 0x0 0x20000>; > + }; > + > + uefi_log: uefi_log_region@908b0000 { > + no-map; > + reg = <0x0 0x908b0000 0x0 0x10000>; > + }; > + > + reserved_mem: reserved_region@908f0000 { > + no-map; > + reg = <0x0 0x908f0000 0x0 0xf000>; > + }; > + > + secdata_apss_mem: secdata_apss_region@908ff000 { > + no-map; > + reg = <0x0 0x908ff000 0x0 0x1000>; > + }; > + > + smem_mem: smem_region@90900000 { > + compatible = "qcom,smem"; > + reg = <0x0 0x90900000 0x0 0x200000>; > + no-map; > + hwlocks = <&tcsr_mutex 3>; > + }; > + > + cpucp_fw_mem: cpucp_fw_region@90b00000 { > + no-map; > + reg = <0x0 0x90b00000 0x0 0x100000>; > + }; > + > + lpass_machine_learning_mem: lpass_machine_learning_region@93b00000 { > + no-map; > + reg = <0x0 0x93b00000 0x0 0xf00000>; > + }; > + > + adsp_rpc_remote_heap_mem: adsp_rpc_remote_heap_region@94a00000 { > + no-map; > + reg = <0x0 0x94a00000 0x0 0x800000>; > + }; > + > + pil_camera_mem: pil_camera_region@95200000 { > + no-map; > + reg = <0x0 0x95200000 0x0 0x500000>; > + }; > + > + pil_adsp_mem: pil_adsp_region@95c00000 { > + no-map; > + reg = <0x0 0x95c00000 0x0 0x1e00000>; > + }; > + > + pil_gdsp0_mem: pil_gdsp0_region@97b00000 { > + no-map; > + reg = <0x0 0x97b00000 0x0 0x1e00000>; > + }; > + > + pil_gdsp1_mem: pil_gdsp1_region@99900000 { > + no-map; > + reg = <0x0 0x99900000 0x0 0x1e00000>; > + }; > + > + pil_cdsp0_mem: pil_cdsp0_region@9b800000 { > + no-map; > + reg = <0x0 0x9b800000 0x0 0x1e00000>; > + }; > + > + pil_gpu_mem: pil_gpu_region@9d600000 { > + no-map; > + reg = <0x0 0x9d600000 0x0 0x2000>; > + }; > + > + pil_cdsp1_mem: pil_cdsp1_region@9d700000 { > + no-map; > + reg = <0x0 0x9d700000 0x0 0x1e00000>; > + }; > + > + pil_cvp_mem: pil_cvp_region@9f500000 { > + no-map; > + reg = <0x0 0x9f500000 0x0 0x700000>; > + }; > + > + pil_video_mem: pil_video_region@9fc00000 { > + no-map; > + reg = <0x0 0x9fc00000 0x0 0x700000>; > + }; > + > + hyptz_reserved_mem: hyptz_reserved_region@beb00000 { > + no-map; > + reg = <0x0 0xbeb00000 0x0 0x11500000>; > + }; > + > + tz_stat_mem: tz_stat_region@d0000000 { > + no-map; > + reg = <0x0 0xd0000000 0x0 0x100000>; > + }; > + > + tags_mem: tags_region@d0100000 { > + no-map; > + reg = <0x0 0xd0100000 0x0 0x1200000>; > + }; > + > + qtee_mem: qtee_region@d1300000 { > + no-map; > + reg = <0x0 0xd1300000 0x0 0x500000>; > + }; > + > + trusted_apps_mem: trusted_apps_region@d1800000 { > + no-map; > + reg = <0x0 0xd1800000 0x0 0x3900000>; > + }; > + > + dump_mem: mem_dump_region { > + compatible = "shared-dma-pool"; > + alloc-ranges = <0x0 0x00000000 0x0 0xffffffff>; > + reusable; > + size = <0 0x3000000>; > + }; > + > + /* global autoconfigured region for contiguous allocations */ > + linux,cma { > + compatible = "shared-dma-pool"; > + alloc-ranges = <0x0 0x00000000 0x0 0xdfffffff>; > + reusable; > + alignment = <0x0 0x400000>; > + size = <0x0 0x2000000>; > + linux,cma-default; > + }; > + }; > + > + psci { > + compatible = "arm,psci-1.0"; > + method = "smc"; > + }; > + > + firmware { > + scm { > + compatible = "qcom,scm"; > + }; > + }; > + > + qup_opp_table_100mhz: qup-100mhz-opp-table { > + compatible = "operating-points-v2"; > + > + opp-100000000 { > + opp-hz = /bits/ 64 <100000000>; > + required-opps = <&rpmhpd_opp_svs_l1>; > + }; > + }; > + > + soc: soc@0 { > + compatible = "simple-bus"; > + #address-cells = <1>; > + #size-cells = <1>; > + ranges = <0 0 0 0xffffffff>; > + > + gcc: clock-controller@100000 { > + compatible = "qcom,gcc-sa8775p"; > + reg = <0x100000 0xc7018>; > + #clock-cells = <1>; > + #reset-cells = <1>; > + #power-domain-cells = <1>; > + clocks = <&rpmhcc RPMH_CXO_CLK>, > + <&sleep_clk>, > + <0>, > + <0>, > + <0>, > + <0>, > + <0>, > + <0>, > + <0>, > + <0>, > + <0>, /* TODO: usb_0_ssphy */ > + <0>, > + <0>, > + <0>, > + <0>; > + power-domains = <&rpmhpd SA8775P_CX>; > + }; > + > + ipcc: mailbox@408000 { > + compatible = "qcom,sa8775p-ipcc", "qcom,ipcc"; > + reg = <0x408000 0x1000>; > + interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>; > + interrupt-controller; > + #interrupt-cells = <3>; > + #mbox-cells = <2>; > + }; > + > + aggre1_noc:interconnect-aggre1-noc { > + compatible = "qcom,sa8775p-aggre1-noc"; > + #interconnect-cells = <2>; > + qcom,bcm-voters = <&apps_bcm_voter>; > + }; > + > + aggre2_noc: interconnect-aggre2-noc { > + compatible = "qcom,sa8775p-aggre2-noc"; > + #interconnect-cells = <2>; > + qcom,bcm-voters = <&apps_bcm_voter>; > + }; > + > + clk_virt: interconnect-clk-virt { > + compatible = "qcom,sa8775p-clk-virt"; > + #interconnect-cells = <2>; > + qcom,bcm-voters = <&apps_bcm_voter>; > + }; > + > + config_noc: interconnect-config-noc { > + compatible = "qcom,sa8775p-config-noc"; > + #interconnect-cells = <2>; > + qcom,bcm-voters = <&apps_bcm_voter>; > + }; > + > + dc_noc: interconnect-dc-noc { > + compatible = "qcom,sa8775p-dc-noc"; > + #interconnect-cells = <2>; > + qcom,bcm-voters = <&apps_bcm_voter>; > + }; > + > + gem_noc: interconnect-gem-noc { > + compatible = "qcom,sa8775p-gem-noc"; > + #interconnect-cells = <2>; > + qcom,bcm-voters = <&apps_bcm_voter>; > + }; > + > + gpdsp_anoc: interconnect-gpdsp-anoc { > + compatible = "qcom,sa8775p-gpdsp-anoc"; > + #interconnect-cells = <2>; > + qcom,bcm-voters = <&apps_bcm_voter>; > + }; > + > + lpass_ag_noc: interconnect-lpass-ag-noc { > + compatible = "qcom,sa8775p-lpass-ag-noc"; > + #interconnect-cells = <2>; > + qcom,bcm-voters = <&apps_bcm_voter>; > + }; > + > + mc_virt: interconnect-mc-virt { > + compatible = "qcom,sa8775p-mc-virt"; > + #interconnect-cells = <2>; > + qcom,bcm-voters = <&apps_bcm_voter>; > + }; > + > + mmss_noc: interconnect-mmss-noc { > + compatible = "qcom,sa8775p-mmss-noc"; > + #interconnect-cells = <2>; > + qcom,bcm-voters = <&apps_bcm_voter>; > + }; > + > + nspa_noc: interconnect-nspa-noc { > + compatible = "qcom,sa8775p-nspa-noc"; > + #interconnect-cells = <2>; > + qcom,bcm-voters = <&apps_bcm_voter>; > + }; > + > + nspb_noc: interconnect-nspb-noc { > + compatible = "qcom,sa8775p-nspb-noc"; > + #interconnect-cells = <2>; > + qcom,bcm-voters = <&apps_bcm_voter>; > + }; > + > + pcie_anoc: interconnect-pcie-anoc { > + compatible = "qcom,sa8775p-pcie-anoc"; > + #interconnect-cells = <2>; > + qcom,bcm-voters = <&apps_bcm_voter>; > + }; > + > + system_noc: interconnect-system-noc { > + compatible = "qcom,sa8775p-system-noc"; > + #interconnect-cells = <2>; > + qcom,bcm-voters = <&apps_bcm_voter>; > + }; > + > + intc: interrupt-controller@17a00000 { > + compatible = "arm,gic-v3"; > + #interrupt-cells = <3>; > + interrupt-controller; > + #address-cells = <1>; > + #size-cells = <1>; > + ranges; > + #redistributor-regions = <1>; > + redistributor-stride = <0x0 0x20000>; > + reg = <0x17a00000 0x10000>, /* GICD */ > + <0x17a60000 0x100000>; /* GICR * 8 */ > + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; > + }; > + > + apps_rsc: rsc@18200000 { > + compatible = "qcom,rpmh-rsc"; > + reg = <0x18200000 0x10000>, > + <0x18210000 0x10000>, > + <0x18220000 0x10000>; > + reg-names = "drv-0", "drv-1", "drv-2"; > + interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>; > + qcom,tcs-offset = <0xd00>; > + qcom,drv-id = <2>; > + qcom,tcs-config = <ACTIVE_TCS 2>, > + <SLEEP_TCS 3>, > + <WAKE_TCS 3>, > + <CONTROL_TCS 0>; > + label = "apps_rsc"; > + > + apps_bcm_voter: bcm_voter { > + compatible = "qcom,bcm-voter"; > + }; > + > + rpmhcc: clock-controller { > + compatible = "qcom,sa8775p-rpmh-clk"; > + #clock-cells = <1>; > + clock-names = "xo"; > + clocks = <&xo_board_clk>; > + }; > + > + rpmhpd: power-controller { > + compatible = "qcom,sa8775p-rpmhpd"; > + #power-domain-cells = <1>; > + operating-points-v2 = <&rpmhpd_opp_table>; > + > + rpmhpd_opp_table: opp-table { > + compatible = "operating-points-v2"; > + > + rpmhpd_opp_ret: opp1 { > + opp-level = <RPMH_REGULATOR_LEVEL_RETENTION>; > + }; > + > + rpmhpd_opp_min_svs: opp2 { > + opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>; > + }; > + > + rpmhpd_opp_low_svs: opp3 { > + opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>; > + }; > + > + rpmhpd_opp_svs: opp4 { > + opp-level = <RPMH_REGULATOR_LEVEL_SVS>; > + }; > + > + rpmhpd_opp_svs_l1: opp5 { > + opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>; > + }; > + > + rpmhpd_opp_nom: opp6 { > + opp-level = <RPMH_REGULATOR_LEVEL_NOM>; > + }; > + > + rpmhpd_opp_nom_l1: opp7 { > + opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>; > + }; > + > + rpmhpd_opp_nom_l2: opp8 { > + opp-level = <RPMH_REGULATOR_LEVEL_NOM_L2>; > + }; > + > + rpmhpd_opp_turbo: opp9 { > + opp-level = <RPMH_REGULATOR_LEVEL_TURBO>; > + }; > + > + rpmhpd_opp_turbo_l1: opp10 { > + opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>; > + }; > + }; > + }; > + }; > + > + arch_timer: timer { > + compatible = "arm,armv8-timer"; > + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, > + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, > + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, > + <GIC_PPI 12 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>; > + clock-frequency = <19200000>; > + }; > + > + memtimer: timer@17c20000 { > + #address-cells = <1>; > + #size-cells = <1>; > + ranges; > + compatible = "arm,armv7-timer-mem"; > + reg = <0x17c20000 0x1000>; > + clock-frequency = <19200000>; > + > + frame@17c21000 { > + frame-number = <0>; > + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; > + reg = <0x17c21000 0x1000>, > + <0x17c22000 0x1000>; > + }; > + > + frame@17c23000 { > + frame-number = <1>; > + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; > + reg = <0x17c23000 0x1000>; > + status = "disabled"; > + }; > + > + frame@17c25000 { > + frame-number = <2>; > + interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; > + reg = <0x17c25000 0x1000>; > + status = "disabled"; > + }; > + > + frame@17c27000 { > + frame-number = <3>; > + interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; > + reg = <0x17c27000 0x1000>; > + status = "disabled"; > + }; > + > + frame@17c29000 { > + frame-number = <4>; > + interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; > + reg = <0x17c29000 0x1000>; > + status = "disabled"; > + }; > + > + frame@17c2b000 { > + frame-number = <5>; > + interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; > + reg = <0x17c2b000 0x1000>; > + status = "disabled"; > + }; > + > + frame@17c2d000 { > + frame-number = <6>; > + interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; > + reg = <0x17c2d000 0x1000>; > + status = "disabled"; > + }; > + }; > + > + tcsr_mutex: hwlock@1f40000 { > + compatible = "qcom,tcsr-mutex"; > + reg = <0x1f40000 0x20000>; > + #hwlock-cells = <1>; > + }; > + > + tlmm: pinctrl@f000000 { > + compatible = "qcom,sa8775p-pinctrl"; > + reg = <0xf000000 0x1000000>; > + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; > + gpio-controller; > + #gpio-cells = <2>; > + interrupt-controller; > + #interrupt-cells = <2>; > + gpio-ranges = <&tlmm 0 0 149>; > + }; > + > + qcom-wdt@17c10000 { > + compatible = "qcom,kpss-wdt"; > + reg = <0x17c10000 0x1000>; > + clocks = <&sleep_clk>; > + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>; > + }; > + > + qupv3_id_1: geniqup@ac0000 { > + compatible = "qcom,geni-se-qup"; > + reg = <0xac0000 0x6000>; > + #address-cells = <1>; > + #size-cells = <1>; > + ranges; > + clock-names = "m-ahb", "s-ahb"; > + clocks = <&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>, > + <&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>; > + iommus = <&apps_smmu 0x443 0x0>; > + status = "disabled"; > + > + uart10: serial@a8c000 { > + compatible = "qcom,geni-uart"; > + reg = <0xa8c000 0x4000>; > + interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>; > + clock-names = "se"; > + clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>; > + interconnect-names = "qup-core", "qup-config", "qup-memory"; > + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, > + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>, > + <&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; > + power-domains = <&rpmhpd SA8775P_CX>; > + operating-points-v2 = <&qup_opp_table_100mhz>; > + status = "disabled"; > + }; > + }; > + > + apps_smmu: apps-smmu@15000000 { > + compatible = "qcom,sa8775p-smmu-500", "arm,mmu-500"; > + reg = <0x15000000 0x100000>, <0x15182000 0x28>; > + reg-names = "base", "tcu-base"; > + #iommu-cells = <2>; > + qcom,skip-init; > + qcom,use-3-lvl-tables; > + #global-interrupts = <2>; > + #size-cells = <1>; > + #address-cells = <1>; > + ranges; > + > + interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 395 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 396 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 398 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 399 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 401 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 402 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 403 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 407 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 409 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 412 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 706 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 689 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 690 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 691 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 692 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 693 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 694 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 695 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 696 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 410 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 411 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 413 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 707 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 708 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 709 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 710 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 711 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 414 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 712 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 713 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 714 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 715 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 912 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 911 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 910 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 909 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 908 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 907 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 906 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 905 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 904 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 903 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 902 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 901 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 900 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 899 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 898 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 897 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 896 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 895 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 894 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 893 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 892 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 891 IRQ_TYPE_LEVEL_HIGH>; > + }; > + }; > +};
diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile index 3e79496292e7..39b8206f7131 100644 --- a/arch/arm64/boot/dts/qcom/Makefile +++ b/arch/arm64/boot/dts/qcom/Makefile @@ -61,6 +61,7 @@ dtb-$(CONFIG_ARCH_QCOM) += qrb5165-rb5-vision-mezzanine.dtb dtb-$(CONFIG_ARCH_QCOM) += sa8155p-adp.dtb dtb-$(CONFIG_ARCH_QCOM) += sa8295p-adp.dtb dtb-$(CONFIG_ARCH_QCOM) += sa8540p-ride.dtb +dtb-$(CONFIG_ARCH_QCOM) += sa8775p-ride.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7180-idp.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-coachz-r1.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-coachz-r1-lte.dtb diff --git a/arch/arm64/boot/dts/qcom/sa8775p-ride.dts b/arch/arm64/boot/dts/qcom/sa8775p-ride.dts new file mode 100644 index 000000000000..d4dae32a84cc --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sa8775p-ride.dts @@ -0,0 +1,39 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (c) 2023, Linaro Limited + */ + +/dts-v1/; + +#include "sa8775p.dtsi" + +/ { + model = "Qualcomm SA8875P Ride"; + compatible = "qcom,sa8775p-ride", "qcom,sa8775p"; + + aliases { + serial0 = &uart10; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; +}; + +&qupv3_id_1 { + status = "okay"; +}; + +&uart10 { + compatible = "qcom,geni-debug-uart"; + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_uart10_state>; +}; + +&tlmm { + qup_uart10_state: qup_uart10_state { + pins = "gpio46", "gpio47"; + function = "qup1_se3"; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/sa8775p.dtsi b/arch/arm64/boot/dts/qcom/sa8775p.dtsi new file mode 100644 index 000000000000..1a3b11628e38 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sa8775p.dtsi @@ -0,0 +1,841 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (c) 2023, Linaro Limited + */ + +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/clock/qcom,gcc-sa8775p.h> +#include <dt-bindings/clock/qcom,rpmh.h> +#include <dt-bindings/interconnect/qcom,sa8775p.h> +#include <dt-bindings/power/qcom-rpmpd.h> +#include <dt-bindings/soc/qcom,rpmh-rsc.h> + +/ { + interrupt-parent = <&intc>; + + #address-cells = <2>; + #size-cells = <2>; + + clocks { + xo_board_clk: xo-board-clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + }; + + sleep_clk: sleep-clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32764>; + }; + }; + + cpus { + #address-cells = <2>; + #size-cells = <0>; + + CPU0: cpu@0 { + device_type = "cpu"; + compatible = "qcom,kryo"; + reg = <0x0 0x0>; + enable-method = "psci"; + next-level-cache = <&L2_0>; + L2_0: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + L3_0: l3-cache { + compatible = "cache"; + }; + }; + }; + + CPU1: cpu@100 { + device_type = "cpu"; + compatible = "qcom,kryo"; + reg = <0x0 0x100>; + enable-method = "psci"; + cpu-release-addr = <0x0 0x90000000>; + next-level-cache = <&L2_1>; + L2_1: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + }; + }; + + CPU2: cpu@200 { + device_type = "cpu"; + compatible = "qcom,kryo"; + reg = <0x0 0x200>; + enable-method = "psci"; + next-level-cache = <&L2_2>; + L2_2: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + }; + }; + + CPU3: cpu@300 { + device_type = "cpu"; + compatible = "qcom,kryo"; + reg = <0x0 0x300>; + enable-method = "psci"; + next-level-cache = <&L2_3>; + L2_3: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + }; + }; + + CPU4: cpu@10000 { + device_type = "cpu"; + compatible = "qcom,kryo"; + reg = <0x0 0x10000>; + enable-method = "psci"; + next-level-cache = <&L2_4>; + L2_4: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_1>; + L3_1: l3-cache { + compatible = "cache"; + }; + + }; + }; + + CPU5: cpu@10100 { + device_type = "cpu"; + compatible = "qcom,kryo"; + reg = <0x0 0x10100>; + enable-method = "psci"; + next-level-cache = <&L2_5>; + L2_5: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_1>; + }; + }; + + CPU6: cpu@10200 { + device_type = "cpu"; + compatible = "qcom,kryo"; + reg = <0x0 0x10200>; + enable-method = "psci"; + next-level-cache = <&L2_6>; + L2_6: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_1>; + }; + }; + + CPU7: cpu@10300 { + device_type = "cpu"; + compatible = "qcom,kryo"; + reg = <0x0 0x10300>; + enable-method = "psci"; + next-level-cache = <&L2_7>; + L2_7: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_1>; + }; + }; + + cpu-map { + cluster0 { + core0 { + cpu = <&CPU0>; + }; + + core1 { + cpu = <&CPU1>; + }; + + core2 { + cpu = <&CPU2>; + }; + + core3 { + cpu = <&CPU3>; + }; + }; + + cluster1 { + core0 { + cpu = <&CPU4>; + }; + + core1 { + cpu = <&CPU5>; + }; + + core2 { + cpu = <&CPU6>; + }; + + core3 { + cpu = <&CPU7>; + }; + }; + }; + }; + + /* Will be updated by the bootloader. */ + memory { + device_type = "memory"; + reg = <0 0 0 0>; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + sail_ss_mem: sail_ss_region@80000000 { + no-map; + reg = <0x0 0x80000000 0x0 0x10000000>; + }; + + hyp_mem: hyp_region@90000000 { + no-map; + reg = <0x0 0x90000000 0x0 0x600000>; + }; + + xbl_boot_mem: xbl_boot_region@90600000 { + no-map; + reg = <0x0 0x90600000 0x0 0x200000>; + }; + + aop_image_mem: aop_image_region@90800000 { + no-map; + reg = <0x0 0x90800000 0x0 0x60000>; + }; + + aop_cmd_db_mem: aop_cmd_db_region@90860000 { + compatible = "qcom,cmd-db"; + no-map; + reg = <0x0 0x90860000 0x0 0x20000>; + }; + + uefi_log: uefi_log_region@908b0000 { + no-map; + reg = <0x0 0x908b0000 0x0 0x10000>; + }; + + reserved_mem: reserved_region@908f0000 { + no-map; + reg = <0x0 0x908f0000 0x0 0xf000>; + }; + + secdata_apss_mem: secdata_apss_region@908ff000 { + no-map; + reg = <0x0 0x908ff000 0x0 0x1000>; + }; + + smem_mem: smem_region@90900000 { + compatible = "qcom,smem"; + reg = <0x0 0x90900000 0x0 0x200000>; + no-map; + hwlocks = <&tcsr_mutex 3>; + }; + + cpucp_fw_mem: cpucp_fw_region@90b00000 { + no-map; + reg = <0x0 0x90b00000 0x0 0x100000>; + }; + + lpass_machine_learning_mem: lpass_machine_learning_region@93b00000 { + no-map; + reg = <0x0 0x93b00000 0x0 0xf00000>; + }; + + adsp_rpc_remote_heap_mem: adsp_rpc_remote_heap_region@94a00000 { + no-map; + reg = <0x0 0x94a00000 0x0 0x800000>; + }; + + pil_camera_mem: pil_camera_region@95200000 { + no-map; + reg = <0x0 0x95200000 0x0 0x500000>; + }; + + pil_adsp_mem: pil_adsp_region@95c00000 { + no-map; + reg = <0x0 0x95c00000 0x0 0x1e00000>; + }; + + pil_gdsp0_mem: pil_gdsp0_region@97b00000 { + no-map; + reg = <0x0 0x97b00000 0x0 0x1e00000>; + }; + + pil_gdsp1_mem: pil_gdsp1_region@99900000 { + no-map; + reg = <0x0 0x99900000 0x0 0x1e00000>; + }; + + pil_cdsp0_mem: pil_cdsp0_region@9b800000 { + no-map; + reg = <0x0 0x9b800000 0x0 0x1e00000>; + }; + + pil_gpu_mem: pil_gpu_region@9d600000 { + no-map; + reg = <0x0 0x9d600000 0x0 0x2000>; + }; + + pil_cdsp1_mem: pil_cdsp1_region@9d700000 { + no-map; + reg = <0x0 0x9d700000 0x0 0x1e00000>; + }; + + pil_cvp_mem: pil_cvp_region@9f500000 { + no-map; + reg = <0x0 0x9f500000 0x0 0x700000>; + }; + + pil_video_mem: pil_video_region@9fc00000 { + no-map; + reg = <0x0 0x9fc00000 0x0 0x700000>; + }; + + hyptz_reserved_mem: hyptz_reserved_region@beb00000 { + no-map; + reg = <0x0 0xbeb00000 0x0 0x11500000>; + }; + + tz_stat_mem: tz_stat_region@d0000000 { + no-map; + reg = <0x0 0xd0000000 0x0 0x100000>; + }; + + tags_mem: tags_region@d0100000 { + no-map; + reg = <0x0 0xd0100000 0x0 0x1200000>; + }; + + qtee_mem: qtee_region@d1300000 { + no-map; + reg = <0x0 0xd1300000 0x0 0x500000>; + }; + + trusted_apps_mem: trusted_apps_region@d1800000 { + no-map; + reg = <0x0 0xd1800000 0x0 0x3900000>; + }; + + dump_mem: mem_dump_region { + compatible = "shared-dma-pool"; + alloc-ranges = <0x0 0x00000000 0x0 0xffffffff>; + reusable; + size = <0 0x3000000>; + }; + + /* global autoconfigured region for contiguous allocations */ + linux,cma { + compatible = "shared-dma-pool"; + alloc-ranges = <0x0 0x00000000 0x0 0xdfffffff>; + reusable; + alignment = <0x0 0x400000>; + size = <0x0 0x2000000>; + linux,cma-default; + }; + }; + + psci { + compatible = "arm,psci-1.0"; + method = "smc"; + }; + + firmware { + scm { + compatible = "qcom,scm"; + }; + }; + + qup_opp_table_100mhz: qup-100mhz-opp-table { + compatible = "operating-points-v2"; + + opp-100000000 { + opp-hz = /bits/ 64 <100000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + }; + + soc: soc@0 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0 0xffffffff>; + + gcc: clock-controller@100000 { + compatible = "qcom,gcc-sa8775p"; + reg = <0x100000 0xc7018>; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + clocks = <&rpmhcc RPMH_CXO_CLK>, + <&sleep_clk>, + <0>, + <0>, + <0>, + <0>, + <0>, + <0>, + <0>, + <0>, + <0>, /* TODO: usb_0_ssphy */ + <0>, + <0>, + <0>, + <0>; + power-domains = <&rpmhpd SA8775P_CX>; + }; + + ipcc: mailbox@408000 { + compatible = "qcom,sa8775p-ipcc", "qcom,ipcc"; + reg = <0x408000 0x1000>; + interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <3>; + #mbox-cells = <2>; + }; + + aggre1_noc:interconnect-aggre1-noc { + compatible = "qcom,sa8775p-aggre1-noc"; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + aggre2_noc: interconnect-aggre2-noc { + compatible = "qcom,sa8775p-aggre2-noc"; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + clk_virt: interconnect-clk-virt { + compatible = "qcom,sa8775p-clk-virt"; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + config_noc: interconnect-config-noc { + compatible = "qcom,sa8775p-config-noc"; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + dc_noc: interconnect-dc-noc { + compatible = "qcom,sa8775p-dc-noc"; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + gem_noc: interconnect-gem-noc { + compatible = "qcom,sa8775p-gem-noc"; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + gpdsp_anoc: interconnect-gpdsp-anoc { + compatible = "qcom,sa8775p-gpdsp-anoc"; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + lpass_ag_noc: interconnect-lpass-ag-noc { + compatible = "qcom,sa8775p-lpass-ag-noc"; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + mc_virt: interconnect-mc-virt { + compatible = "qcom,sa8775p-mc-virt"; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + mmss_noc: interconnect-mmss-noc { + compatible = "qcom,sa8775p-mmss-noc"; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + nspa_noc: interconnect-nspa-noc { + compatible = "qcom,sa8775p-nspa-noc"; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + nspb_noc: interconnect-nspb-noc { + compatible = "qcom,sa8775p-nspb-noc"; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + pcie_anoc: interconnect-pcie-anoc { + compatible = "qcom,sa8775p-pcie-anoc"; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + system_noc: interconnect-system-noc { + compatible = "qcom,sa8775p-system-noc"; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + intc: interrupt-controller@17a00000 { + compatible = "arm,gic-v3"; + #interrupt-cells = <3>; + interrupt-controller; + #address-cells = <1>; + #size-cells = <1>; + ranges; + #redistributor-regions = <1>; + redistributor-stride = <0x0 0x20000>; + reg = <0x17a00000 0x10000>, /* GICD */ + <0x17a60000 0x100000>; /* GICR * 8 */ + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; + }; + + apps_rsc: rsc@18200000 { + compatible = "qcom,rpmh-rsc"; + reg = <0x18200000 0x10000>, + <0x18210000 0x10000>, + <0x18220000 0x10000>; + reg-names = "drv-0", "drv-1", "drv-2"; + interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>; + qcom,tcs-offset = <0xd00>; + qcom,drv-id = <2>; + qcom,tcs-config = <ACTIVE_TCS 2>, + <SLEEP_TCS 3>, + <WAKE_TCS 3>, + <CONTROL_TCS 0>; + label = "apps_rsc"; + + apps_bcm_voter: bcm_voter { + compatible = "qcom,bcm-voter"; + }; + + rpmhcc: clock-controller { + compatible = "qcom,sa8775p-rpmh-clk"; + #clock-cells = <1>; + clock-names = "xo"; + clocks = <&xo_board_clk>; + }; + + rpmhpd: power-controller { + compatible = "qcom,sa8775p-rpmhpd"; + #power-domain-cells = <1>; + operating-points-v2 = <&rpmhpd_opp_table>; + + rpmhpd_opp_table: opp-table { + compatible = "operating-points-v2"; + + rpmhpd_opp_ret: opp1 { + opp-level = <RPMH_REGULATOR_LEVEL_RETENTION>; + }; + + rpmhpd_opp_min_svs: opp2 { + opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>; + }; + + rpmhpd_opp_low_svs: opp3 { + opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>; + }; + + rpmhpd_opp_svs: opp4 { + opp-level = <RPMH_REGULATOR_LEVEL_SVS>; + }; + + rpmhpd_opp_svs_l1: opp5 { + opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>; + }; + + rpmhpd_opp_nom: opp6 { + opp-level = <RPMH_REGULATOR_LEVEL_NOM>; + }; + + rpmhpd_opp_nom_l1: opp7 { + opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>; + }; + + rpmhpd_opp_nom_l2: opp8 { + opp-level = <RPMH_REGULATOR_LEVEL_NOM_L2>; + }; + + rpmhpd_opp_turbo: opp9 { + opp-level = <RPMH_REGULATOR_LEVEL_TURBO>; + }; + + rpmhpd_opp_turbo_l1: opp10 { + opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>; + }; + }; + }; + }; + + arch_timer: timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 12 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>; + clock-frequency = <19200000>; + }; + + memtimer: timer@17c20000 { + #address-cells = <1>; + #size-cells = <1>; + ranges; + compatible = "arm,armv7-timer-mem"; + reg = <0x17c20000 0x1000>; + clock-frequency = <19200000>; + + frame@17c21000 { + frame-number = <0>; + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x17c21000 0x1000>, + <0x17c22000 0x1000>; + }; + + frame@17c23000 { + frame-number = <1>; + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x17c23000 0x1000>; + status = "disabled"; + }; + + frame@17c25000 { + frame-number = <2>; + interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x17c25000 0x1000>; + status = "disabled"; + }; + + frame@17c27000 { + frame-number = <3>; + interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x17c27000 0x1000>; + status = "disabled"; + }; + + frame@17c29000 { + frame-number = <4>; + interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x17c29000 0x1000>; + status = "disabled"; + }; + + frame@17c2b000 { + frame-number = <5>; + interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x17c2b000 0x1000>; + status = "disabled"; + }; + + frame@17c2d000 { + frame-number = <6>; + interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x17c2d000 0x1000>; + status = "disabled"; + }; + }; + + tcsr_mutex: hwlock@1f40000 { + compatible = "qcom,tcsr-mutex"; + reg = <0x1f40000 0x20000>; + #hwlock-cells = <1>; + }; + + tlmm: pinctrl@f000000 { + compatible = "qcom,sa8775p-pinctrl"; + reg = <0xf000000 0x1000000>; + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-ranges = <&tlmm 0 0 149>; + }; + + qcom-wdt@17c10000 { + compatible = "qcom,kpss-wdt"; + reg = <0x17c10000 0x1000>; + clocks = <&sleep_clk>; + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>; + }; + + qupv3_id_1: geniqup@ac0000 { + compatible = "qcom,geni-se-qup"; + reg = <0xac0000 0x6000>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + clock-names = "m-ahb", "s-ahb"; + clocks = <&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>, + <&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>; + iommus = <&apps_smmu 0x443 0x0>; + status = "disabled"; + + uart10: serial@a8c000 { + compatible = "qcom,geni-uart"; + reg = <0xa8c000 0x4000>; + interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>, + <&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; + power-domains = <&rpmhpd SA8775P_CX>; + operating-points-v2 = <&qup_opp_table_100mhz>; + status = "disabled"; + }; + }; + + apps_smmu: apps-smmu@15000000 { + compatible = "qcom,sa8775p-smmu-500", "arm,mmu-500"; + reg = <0x15000000 0x100000>, <0x15182000 0x28>; + reg-names = "base", "tcu-base"; + #iommu-cells = <2>; + qcom,skip-init; + qcom,use-3-lvl-tables; + #global-interrupts = <2>; + #size-cells = <1>; + #address-cells = <1>; + ranges; + + interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 395 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 396 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 398 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 399 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 401 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 402 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 403 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 407 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 409 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 412 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 706 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 689 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 690 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 691 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 692 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 693 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 694 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 695 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 696 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 410 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 411 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 413 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 707 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 708 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 709 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 710 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 711 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 414 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 712 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 713 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 714 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 715 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 912 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 911 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 910 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 909 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 908 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 907 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 906 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 905 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 904 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 903 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 902 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 901 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 900 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 899 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 898 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 897 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 896 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 895 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 894 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 893 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 892 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 891 IRQ_TYPE_LEVEL_HIGH>; + }; + }; +};