deleted file mode 100644
@@ -1,58 +0,0 @@
-.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
-.. c:namespace:: DTV.audio
-
-.. _AUDIO_BILINGUAL_CHANNEL_SELECT:
-
-==============================
-AUDIO_BILINGUAL_CHANNEL_SELECT
-==============================
-
-Name
-----
-
-AUDIO_BILINGUAL_CHANNEL_SELECT
-
-.. attention:: This ioctl is deprecated
-
-Synopsis
---------
-
-.. c:macro:: AUDIO_BILINGUAL_CHANNEL_SELECT
-
-``int ioctl(int fd, AUDIO_BILINGUAL_CHANNEL_SELECT, struct audio_channel_select *select)``
-
-Arguments
----------
-
-.. flat-table::
- :header-rows: 0
- :stub-columns: 0
-
- -
-
- - int fd
-
- - File descriptor returned by a previous call to open().
-
- -
-
- - audio_channel_select_t ch
-
- - Select the output format of the audio (mono left/right, stereo).
-
-Description
------------
-
-This ioctl is obsolete. Do not use in new drivers. It has been replaced
-by the V4L2 ``V4L2_CID_MPEG_AUDIO_DEC_MULTILINGUAL_PLAYBACK`` control
-for MPEG decoders controlled through V4L2.
-
-This ioctl call asks the Audio Device to select the requested channel
-for bilingual streams if possible.
-
-Return Value
-------------
-
-On success 0 is returned, on error -1 and the ``errno`` variable is set
-appropriately. The generic error codes are described at the
-:ref:`Generic Error Codes <gen-errors>` chapter.
deleted file mode 100644
@@ -1,57 +0,0 @@
-.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
-.. c:namespace:: DTV.audio
-
-.. _AUDIO_CHANNEL_SELECT:
-
-====================
-AUDIO_CHANNEL_SELECT
-====================
-
-Name
-----
-
-AUDIO_CHANNEL_SELECT
-
-.. attention:: This ioctl is deprecated
-
-Synopsis
---------
-
-.. c:macro:: AUDIO_CHANNEL_SELECT
-
-``int ioctl(int fd, AUDIO_CHANNEL_SELECT, struct audio_channel_select *select)``
-
-Arguments
----------
-
-.. flat-table::
- :header-rows: 0
- :stub-columns: 0
-
- -
-
- - int fd
-
- - File descriptor returned by a previous call to open().
-
- -
-
- - audio_channel_select_t ch
-
- - Select the output format of the audio (mono left/right, stereo).
-
-Description
------------
-
-This ioctl is for Digital TV devices only. To control a V4L2 decoder use the
-V4L2 ``V4L2_CID_MPEG_AUDIO_DEC_PLAYBACK`` control instead.
-
-This ioctl call asks the Audio Device to select the requested channel if
-possible.
-
-Return Value
-------------
-
-On success 0 is returned, on error -1 and the ``errno`` variable is set
-appropriately. The generic error codes are described at the
-:ref:`Generic Error Codes <gen-errors>` chapter.
deleted file mode 100644
@@ -1,48 +0,0 @@
-.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
-.. c:namespace:: DTV.audio
-
-.. _AUDIO_CLEAR_BUFFER:
-
-==================
-AUDIO_CLEAR_BUFFER
-==================
-
-Name
-----
-
-AUDIO_CLEAR_BUFFER
-
-.. attention:: This ioctl is deprecated
-
-Synopsis
---------
-
-.. c:macro:: AUDIO_CLEAR_BUFFER
-
-``int ioctl(int fd, AUDIO_CLEAR_BUFFER)``
-
-Arguments
----------
-
-.. flat-table::
- :header-rows: 0
- :stub-columns: 0
-
- - .. row 1
-
- - int fd
-
- - File descriptor returned by a previous call to open().
-
-Description
------------
-
-This ioctl call asks the Audio Device to clear all software and hardware
-buffers of the audio decoder device.
-
-Return Value
-------------
-
-On success 0 is returned, on error -1 and the ``errno`` variable is set
-appropriately. The generic error codes are described at the
-:ref:`Generic Error Codes <gen-errors>` chapter.
deleted file mode 100644
@@ -1,48 +0,0 @@
-.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
-.. c:namespace:: DTV.audio
-
-.. _AUDIO_CONTINUE:
-
-==============
-AUDIO_CONTINUE
-==============
-
-Name
-----
-
-AUDIO_CONTINUE
-
-.. attention:: This ioctl is deprecated
-
-Synopsis
---------
-
-.. c:macro:: AUDIO_CONTINUE
-
-``int ioctl(int fd, AUDIO_CONTINUE)``
-
-Arguments
----------
-
-.. flat-table::
- :header-rows: 0
- :stub-columns: 0
-
- - .. row 1
-
- - int fd
-
- - File descriptor returned by a previous call to open().
-
-Description
------------
-
-This ioctl restarts the decoding and playing process previously paused
-with AUDIO_PAUSE command.
-
-Return Value
-------------
-
-On success 0 is returned, on error -1 and the ``errno`` variable is set
-appropriately. The generic error codes are described at the
-:ref:`Generic Error Codes <gen-errors>` chapter.
deleted file mode 100644
@@ -1,51 +0,0 @@
-.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
-.. c:namespace:: DTV.audio
-
-.. _audio_fclose:
-
-========================
-Digital TV audio close()
-========================
-
-Name
-----
-
-Digital TV audio close()
-
-.. attention:: This ioctl is deprecated
-
-Synopsis
---------
-
-.. c:function:: int close(int fd)
-
-Arguments
----------
-
-.. flat-table::
- :header-rows: 0
- :stub-columns: 0
-
- - .. row 1
-
- - int fd
-
- - File descriptor returned by a previous call to open().
-
-Description
------------
-
-This system call closes a previously opened audio device.
-
-Return Value
-------------
-
-.. flat-table::
- :header-rows: 0
- :stub-columns: 0
-
- - .. row 1
-
- - ``EBADF``
-
- - fd is not a valid open file descriptor.
deleted file mode 100644
@@ -1,103 +0,0 @@
-.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
-.. c:namespace:: DTV.audio
-
-.. _audio_fopen:
-
-=======================
-Digital TV audio open()
-=======================
-
-Name
-----
-
-Digital TV audio open()
-
-.. attention:: This ioctl is deprecated
-
-Synopsis
---------
-
-.. c:function:: int open(const char *deviceName, int flags)
-
-Arguments
----------
-
-.. flat-table::
- :header-rows: 0
- :stub-columns: 0
-
- - .. row 1
-
- - const char \*deviceName
-
- - Name of specific audio device.
-
- - .. row 2
-
- - int flags
-
- - A bit-wise OR of the following flags:
-
- - .. row 3
-
- -
- - O_RDONLY read-only access
-
- - .. row 4
-
- -
- - O_RDWR read/write access
-
- - .. row 5
-
- -
- - O_NONBLOCK open in non-blocking mode
-
- - .. row 6
-
- -
- - (blocking mode is the default)
-
-Description
------------
-
-This system call opens a named audio device (e.g.
-/dev/dvb/adapter0/audio0) for subsequent use. When an open() call has
-succeeded, the device will be ready for use. The significance of
-blocking or non-blocking mode is described in the documentation for
-functions where there is a difference. It does not affect the semantics
-of the open() call itself. A device opened in blocking mode can later be
-put into non-blocking mode (and vice versa) using the F_SETFL command
-of the fcntl system call. This is a standard system call, documented in
-the Linux manual page for fcntl. Only one user can open the Audio Device
-in O_RDWR mode. All other attempts to open the device in this mode will
-fail, and an error code will be returned. If the Audio Device is opened
-in O_RDONLY mode, the only ioctl call that can be used is
-AUDIO_GET_STATUS. All other call will return with an error code.
-
-Return Value
-------------
-
-.. tabularcolumns:: |p{2.5cm}|p{15.0cm}|
-
-.. flat-table::
- :header-rows: 0
- :stub-columns: 0
-
- - .. row 1
-
- - ``ENODEV``
-
- - Device driver not loaded/available.
-
- - .. row 2
-
- - ``EBUSY``
-
- - Device or resource busy.
-
- - .. row 3
-
- - ``EINVAL``
-
- - Invalid argument.
deleted file mode 100644
@@ -1,79 +0,0 @@
-.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
-.. c:namespace:: DTV.audio
-
-.. _audio_fwrite:
-
-=========================
-Digital TV audio write()
-=========================
-
-Name
-----
-
-Digital TV audio write()
-
-.. attention:: This ioctl is deprecated
-
-Synopsis
---------
-
-.. c:function:: size_t write(int fd, const void *buf, size_t count)
-
-Arguments
----------
-
-.. flat-table::
- :header-rows: 0
- :stub-columns: 0
-
- - .. row 1
-
- - int fd
-
- - File descriptor returned by a previous call to open().
-
- - .. row 2
-
- - void \*buf
-
- - Pointer to the buffer containing the PES data.
-
- - .. row 3
-
- - size_t count
-
- - Size of buf.
-
-Description
------------
-
-This system call can only be used if AUDIO_SOURCE_MEMORY is selected
-in the ioctl call AUDIO_SELECT_SOURCE. The data provided shall be in
-PES format. If O_NONBLOCK is not specified the function will block
-until buffer space is available. The amount of data to be transferred is
-implied by count.
-
-Return Value
-------------
-
-.. flat-table::
- :header-rows: 0
- :stub-columns: 0
-
- - .. row 1
-
- - ``EPERM``
-
- - Mode AUDIO_SOURCE_MEMORY not selected.
-
- - .. row 2
-
- - ``ENOMEM``
-
- - Attempted to write more data than the internal buffer can hold.
-
- - .. row 3
-
- - ``EBADF``
-
- - fd is not a valid open file descriptor.
deleted file mode 100644
@@ -1,54 +0,0 @@
-.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
-.. c:namespace:: DTV.audio
-
-.. _AUDIO_GET_CAPABILITIES:
-
-======================
-AUDIO_GET_CAPABILITIES
-======================
-
-Name
-----
-
-AUDIO_GET_CAPABILITIES
-
-.. attention:: This ioctl is deprecated
-
-Synopsis
---------
-
-.. c:macro:: AUDIO_GET_CAPABILITIES
-
-``int ioctl(int fd, AUDIO_GET_CAPABILITIES, unsigned int *cap)``
-
-Arguments
----------
-
-.. flat-table::
- :header-rows: 0
- :stub-columns: 0
-
- -
-
- - int fd
-
- - File descriptor returned by a previous call to open().
-
- -
-
- - unsigned int \*cap
-
- - Returns a bit array of supported sound formats.
-
-Description
------------
-
-This ioctl call asks the Audio Device to tell us about the decoding
-capabilities of the audio hardware.
-
-Return Value
-------------
-
-On success 0 is returned, on error -1 and the ``errno`` variable is set
-appropriately. The generic error codes are described at the
-:ref:`Generic Error Codes <gen-errors>` chapter.
deleted file mode 100644
@@ -1,54 +0,0 @@
-.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
-.. c:namespace:: DTV.audio
-
-.. _AUDIO_GET_STATUS:
-
-================
-AUDIO_GET_STATUS
-================
-
-Name
-----
-
-AUDIO_GET_STATUS
-
-.. attention:: This ioctl is deprecated
-
-Synopsis
---------
-
-.. c:macro:: AUDIO_GET_STATUS
-
-``int ioctl(int fd, AUDIO_GET_STATUS, struct audio_status *status)``
-
-Arguments
----------
-
-.. flat-table::
- :header-rows: 0
- :stub-columns: 0
-
- -
-
- - int fd
-
- - File descriptor returned by a previous call to open().
-
- -
-
- - struct audio_status \*status
-
- - Returns the current state of Audio Device.
-
-Description
------------
-
-This ioctl call asks the Audio Device to return the current state of the
-Audio Device.
-
-Return Value
-------------
-
-On success 0 is returned, on error -1 and the ``errno`` variable is set
-appropriately. The generic error codes are described at the
-:ref:`Generic Error Codes <gen-errors>` chapter.
deleted file mode 100644
@@ -1,49 +0,0 @@
-.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
-.. c:namespace:: DTV.audio
-
-.. _AUDIO_PAUSE:
-
-===========
-AUDIO_PAUSE
-===========
-
-Name
-----
-
-AUDIO_PAUSE
-
-.. attention:: This ioctl is deprecated
-
-Synopsis
---------
-
-.. c:macro:: AUDIO_PAUSE
-
-``int ioctl(int fd, AUDIO_PAUSE)``
-
-Arguments
----------
-
-.. flat-table::
- :header-rows: 0
- :stub-columns: 0
-
- - .. row 1
-
- - int fd
-
- - File descriptor returned by a previous call to open().
-
-Description
------------
-
-This ioctl call suspends the audio stream being played. Decoding and
-playing are paused. It is then possible to restart again decoding and
-playing process of the audio stream using AUDIO_CONTINUE command.
-
-Return Value
-------------
-
-On success 0 is returned, on error -1 and the ``errno`` variable is set
-appropriately. The generic error codes are described at the
-:ref:`Generic Error Codes <gen-errors>` chapter.
deleted file mode 100644
@@ -1,48 +0,0 @@
-.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
-.. c:namespace:: DTV.audio
-
-.. _AUDIO_PLAY:
-
-==========
-AUDIO_PLAY
-==========
-
-Name
-----
-
-AUDIO_PLAY
-
-.. attention:: This ioctl is deprecated
-
-Synopsis
---------
-
-.. c:macro:: AUDIO_PLAY
-
-``int ioctl(int fd, AUDIO_PLAY)``
-
-Arguments
----------
-
-.. flat-table::
- :header-rows: 0
- :stub-columns: 0
-
- - .. row 1
-
- - int fd
-
- - File descriptor returned by a previous call to open().
-
-Description
------------
-
-This ioctl call asks the Audio Device to start playing an audio stream
-from the selected source.
-
-Return Value
-------------
-
-On success 0 is returned, on error -1 and the ``errno`` variable is set
-appropriately. The generic error codes are described at the
-:ref:`Generic Error Codes <gen-errors>` chapter.
deleted file mode 100644
@@ -1,56 +0,0 @@
-.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
-.. c:namespace:: DTV.audio
-
-.. _AUDIO_SELECT_SOURCE:
-
-===================
-AUDIO_SELECT_SOURCE
-===================
-
-Name
-----
-
-AUDIO_SELECT_SOURCE
-
-.. attention:: This ioctl is deprecated
-
-Synopsis
---------
-
-.. c:macro:: AUDIO_SELECT_SOURCE
-
-``int ioctl(int fd, AUDIO_SELECT_SOURCE, struct audio_stream_source *source)``
-
-Arguments
----------
-
-.. flat-table::
- :header-rows: 0
- :stub-columns: 0
-
- -
-
- - int fd
-
- - File descriptor returned by a previous call to open().
-
- -
-
- - audio_stream_source_t source
-
- - Indicates the source that shall be used for the Audio stream.
-
-Description
------------
-
-This ioctl call informs the audio device which source shall be used for
-the input data. The possible sources are demux or memory. If
-AUDIO_SOURCE_MEMORY is selected, the data is fed to the Audio Device
-through the write command.
-
-Return Value
-------------
-
-On success 0 is returned, on error -1 and the ``errno`` variable is set
-appropriately. The generic error codes are described at the
-:ref:`Generic Error Codes <gen-errors>` chapter.
deleted file mode 100644
@@ -1,58 +0,0 @@
-.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
-.. c:namespace:: DTV.audio
-
-.. _AUDIO_SET_AV_SYNC:
-
-=================
-AUDIO_SET_AV_SYNC
-=================
-
-Name
-----
-
-AUDIO_SET_AV_SYNC
-
-.. attention:: This ioctl is deprecated
-
-Synopsis
---------
-
-.. c:macro:: AUDIO_SET_AV_SYNC
-
-``int ioctl(int fd, AUDIO_SET_AV_SYNC, boolean state)``
-
-Arguments
----------
-
-.. flat-table::
- :header-rows: 0
- :stub-columns: 0
-
- -
-
- - int fd
-
- - File descriptor returned by a previous call to open().
-
- -
-
- - boolean state
-
- - Tells the Digital TV subsystem if A/V synchronization shall be ON or OFF.
-
- TRUE: AV-sync ON
-
- FALSE: AV-sync OFF
-
-Description
------------
-
-This ioctl call asks the Audio Device to turn ON or OFF A/V
-synchronization.
-
-Return Value
-------------
-
-On success 0 is returned, on error -1 and the ``errno`` variable is set
-appropriately. The generic error codes are described at the
-:ref:`Generic Error Codes <gen-errors>` chapter.
deleted file mode 100644
@@ -1,62 +0,0 @@
-.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
-.. c:namespace:: DTV.audio
-
-.. _AUDIO_SET_BYPASS_MODE:
-
-=====================
-AUDIO_SET_BYPASS_MODE
-=====================
-
-Name
-----
-
-AUDIO_SET_BYPASS_MODE
-
-.. attention:: This ioctl is deprecated
-
-Synopsis
---------
-
-.. c:macro:: AUDIO_SET_BYPASS_MODE
-
-``int ioctl(int fd, AUDIO_SET_BYPASS_MODE, boolean mode)``
-
-Arguments
----------
-
-.. flat-table::
- :header-rows: 0
- :stub-columns: 0
-
- -
-
- - int fd
-
- - File descriptor returned by a previous call to open().
-
- -
-
- - boolean mode
-
- - Enables or disables the decoding of the current Audio stream in
- the Digital TV subsystem.
-
- TRUE: Bypass is disabled
-
- FALSE: Bypass is enabled
-
-Description
------------
-
-This ioctl call asks the Audio Device to bypass the Audio decoder and
-forward the stream without decoding. This mode shall be used if streams
-that can't be handled by the Digital TV system shall be decoded. Dolby
-DigitalTM streams are automatically forwarded by the Digital TV subsystem if
-the hardware can handle it.
-
-Return Value
-------------
-
-On success 0 is returned, on error -1 and the ``errno`` variable is set
-appropriately. The generic error codes are described at the
-:ref:`Generic Error Codes <gen-errors>` chapter.
deleted file mode 100644
@@ -1,59 +0,0 @@
-.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
-.. c:namespace:: DTV.audio
-
-.. _AUDIO_SET_ID:
-
-============
-AUDIO_SET_ID
-============
-
-Name
-----
-
-AUDIO_SET_ID
-
-.. attention:: This ioctl is deprecated
-
-Synopsis
---------
-
-.. c:macro:: AUDIO_SET_ID
-
-``int ioctl(int fd, AUDIO_SET_ID, int id)``
-
-Arguments
----------
-
-.. flat-table::
- :header-rows: 0
- :stub-columns: 0
-
- -
-
- - int fd
-
- - File descriptor returned by a previous call to open().
-
- -
-
- - int id
-
- - audio sub-stream id
-
-Description
------------
-
-This ioctl selects which sub-stream is to be decoded if a program or
-system stream is sent to the video device. If no audio stream type is
-set the id has to be in [0xC0,0xDF] for MPEG sound, in [0x80,0x87] for
-AC3 and in [0xA0,0xA7] for LPCM. More specifications may follow for
-other stream types. If the stream type is set the id just specifies the
-substream id of the audio stream and only the first 5 bits are
-recognized.
-
-Return Value
-------------
-
-On success 0 is returned, on error -1 and the ``errno`` variable is set
-appropriately. The generic error codes are described at the
-:ref:`Generic Error Codes <gen-errors>` chapter.
deleted file mode 100644
@@ -1,53 +0,0 @@
-.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
-.. c:namespace:: DTV.audio
-
-.. _AUDIO_SET_MIXER:
-
-===============
-AUDIO_SET_MIXER
-===============
-
-Name
-----
-
-AUDIO_SET_MIXER
-
-.. attention:: This ioctl is deprecated
-
-Synopsis
---------
-
-.. c:macro:: AUDIO_SET_MIXER
-
-``int ioctl(int fd, AUDIO_SET_MIXER, struct audio_mixer *mix)``
-
-Arguments
----------
-
-.. flat-table::
- :header-rows: 0
- :stub-columns: 0
-
- -
-
- - int fd
-
- - File descriptor returned by a previous call to open().
-
- -
-
- - audio_mixer_t \*mix
-
- - mixer settings.
-
-Description
------------
-
-This ioctl lets you adjust the mixer settings of the audio decoder.
-
-Return Value
-------------
-
-On success 0 is returned, on error -1 and the ``errno`` variable is set
-appropriately. The generic error codes are described at the
-:ref:`Generic Error Codes <gen-errors>` chapter.
deleted file mode 100644
@@ -1,62 +0,0 @@
-.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
-.. c:namespace:: DTV.audio
-
-.. _AUDIO_SET_MUTE:
-
-==============
-AUDIO_SET_MUTE
-==============
-
-Name
-----
-
-AUDIO_SET_MUTE
-
-.. attention:: This ioctl is deprecated
-
-Synopsis
---------
-
-.. c:macro:: AUDIO_SET_MUTE
-
-``int ioctl(int fd, AUDIO_SET_MUTE, boolean state)``
-
-Arguments
----------
-
-.. flat-table::
- :header-rows: 0
- :stub-columns: 0
-
- -
-
- - int fd
-
- - File descriptor returned by a previous call to open().
-
- -
-
- - boolean state
-
- - Indicates if audio device shall mute or not.
-
- TRUE: Audio Mute
-
- FALSE: Audio Un-mute
-
-Description
------------
-
-This ioctl is for Digital TV devices only. To control a V4L2 decoder use the
-V4L2 :ref:`VIDIOC_DECODER_CMD` with the
-``V4L2_DEC_CMD_START_MUTE_AUDIO`` flag instead.
-
-This ioctl call asks the audio device to mute the stream that is
-currently being played.
-
-Return Value
-------------
-
-On success 0 is returned, on error -1 and the ``errno`` variable is set
-appropriately. The generic error codes are described at the
-:ref:`Generic Error Codes <gen-errors>` chapter.
deleted file mode 100644
@@ -1,66 +0,0 @@
-.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
-.. c:namespace:: DTV.audio
-
-.. _AUDIO_SET_STREAMTYPE:
-
-====================
-AUDIO_SET_STREAMTYPE
-====================
-
-Name
-----
-
-AUDIO_SET_STREAMTYPE
-
-.. attention:: This ioctl is deprecated
-
-Synopsis
---------
-
-.. c:macro:: AUDIO_SET_STREAMTYPE
-
-``int ioctl(fd, AUDIO_SET_STREAMTYPE, int type)``
-
-Arguments
----------
-
-.. flat-table::
- :header-rows: 0
- :stub-columns: 0
-
- -
-
- - int fd
-
- - File descriptor returned by a previous call to open().
-
- -
-
- - int type
-
- - stream type
-
-Description
------------
-
-This ioctl tells the driver which kind of audio stream to expect. This
-is useful if the stream offers several audio sub-streams like LPCM and
-AC3.
-
-Return Value
-------------
-
-On success 0 is returned, on error -1 and the ``errno`` variable is set
-appropriately. The generic error codes are described at the
-:ref:`Generic Error Codes <gen-errors>` chapter.
-
-
-.. flat-table::
- :header-rows: 0
- :stub-columns: 0
-
- - .. row 1
-
- - ``EINVAL``
-
- - type is not a valid or supported stream type.
deleted file mode 100644
@@ -1,48 +0,0 @@
-.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
-.. c:namespace:: DTV.audio
-
-.. _AUDIO_STOP:
-
-==========
-AUDIO_STOP
-==========
-
-Name
-----
-
-AUDIO_STOP
-
-.. attention:: This ioctl is deprecated
-
-Synopsis
---------
-
-.. c:macro:: AUDIO_STOP
-
-``int ioctl(int fd, AUDIO_STOP)``
-
-Arguments
----------
-
-.. flat-table::
- :header-rows: 0
- :stub-columns: 0
-
- - .. row 1
-
- - int fd
-
- - File descriptor returned by a previous call to open().
-
-Description
------------
-
-This ioctl call asks the Audio Device to stop playing the current
-stream.
-
-Return Value
-------------
-
-On success 0 is returned, on error -1 and the ``errno`` variable is set
-appropriately. The generic error codes are described at the
-:ref:`Generic Error Codes <gen-errors>` chapter.
deleted file mode 100644
@@ -1,27 +0,0 @@
-.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
-
-.. _dvb_audio:
-
-#######################
-Digital TV Audio Device
-#######################
-
-The Digital TV audio device controls the MPEG2 audio decoder of the Digital
-TV hardware. It can be accessed through ``/dev/dvb/adapter?/audio?``. Data
-types and ioctl definitions can be accessed by including
-``linux/dvb/audio.h`` in your application.
-
-Please note that some Digital TV cards don't have their own MPEG decoder, which
-results in the omission of the audio and video device.
-
-These ioctls were also used by V4L2 to control MPEG decoders implemented
-in V4L2. The use of these ioctls for that purpose has been made obsolete
-and proper V4L2 ioctls or controls have been created to replace that
-functionality.
-
-
-.. toctree::
- :maxdepth: 1
-
- audio_data_types
- audio_function_calls
deleted file mode 100644
@@ -1,116 +0,0 @@
-.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
-
-.. _audio_data_types:
-
-****************
-Audio Data Types
-****************
-
-This section describes the structures, data types and defines used when
-talking to the audio device.
-
-.. c:type:: audio_stream_source
-
-The audio stream source is set through the AUDIO_SELECT_SOURCE call
-and can take the following values, depending on whether we are replaying
-from an internal (demux) or external (user write) source.
-
-
-.. code-block:: c
-
- typedef enum {
- AUDIO_SOURCE_DEMUX,
- AUDIO_SOURCE_MEMORY
- } audio_stream_source_t;
-
-AUDIO_SOURCE_DEMUX selects the demultiplexer (fed either by the
-frontend or the DVR device) as the source of the video stream. If
-AUDIO_SOURCE_MEMORY is selected the stream comes from the application
-through the ``write()`` system call.
-
-
-.. c:type:: audio_play_state
-
-The following values can be returned by the AUDIO_GET_STATUS call
-representing the state of audio playback.
-
-
-.. code-block:: c
-
- typedef enum {
- AUDIO_STOPPED,
- AUDIO_PLAYING,
- AUDIO_PAUSED
- } audio_play_state_t;
-
-
-.. c:type:: audio_channel_select
-
-The audio channel selected via AUDIO_CHANNEL_SELECT is determined by
-the following values.
-
-
-.. code-block:: c
-
- typedef enum {
- AUDIO_STEREO,
- AUDIO_MONO_LEFT,
- AUDIO_MONO_RIGHT,
- AUDIO_MONO,
- AUDIO_STEREO_SWAPPED
- } audio_channel_select_t;
-
-
-.. c:type:: audio_status
-
-The AUDIO_GET_STATUS call returns the following structure informing
-about various states of the playback operation.
-
-
-.. code-block:: c
-
- typedef struct audio_status {
- boolean AV_sync_state;
- boolean mute_state;
- audio_play_state_t play_state;
- audio_stream_source_t stream_source;
- audio_channel_select_t channel_select;
- boolean bypass_mode;
- audio_mixer_t mixer_state;
- } audio_status_t;
-
-
-.. c:type:: audio_mixer
-
-The following structure is used by the AUDIO_SET_MIXER call to set the
-audio volume.
-
-
-.. code-block:: c
-
- typedef struct audio_mixer {
- unsigned int volume_left;
- unsigned int volume_right;
- } audio_mixer_t;
-
-
-.. _audio_encodings:
-
-audio encodings
-===============
-
-A call to AUDIO_GET_CAPABILITIES returns an unsigned integer with the
-following bits set according to the hardwares capabilities.
-
-
-.. code-block:: c
-
- #define AUDIO_CAP_DTS 1
- #define AUDIO_CAP_LPCM 2
- #define AUDIO_CAP_MP1 4
- #define AUDIO_CAP_MP2 8
- #define AUDIO_CAP_MP3 16
- #define AUDIO_CAP_AAC 32
- #define AUDIO_CAP_OGG 64
- #define AUDIO_CAP_SDDS 128
- #define AUDIO_CAP_AC3 256
deleted file mode 100644
@@ -1,30 +0,0 @@
-.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
-
-.. _audio_function_calls:
-
-********************
-Audio Function Calls
-********************
-
-.. toctree::
- :maxdepth: 1
-
- audio-fopen
- audio-fclose
- audio-fwrite
- audio-stop
- audio-play
- audio-pause
- audio-continue
- audio-select-source
- audio-set-mute
- audio-set-av-sync
- audio-set-bypass-mode
- audio-channel-select
- audio-bilingual-channel-select
- audio-get-status
- audio-get-capabilities
- audio-clear-buffer
- audio-set-id
- audio-set-mixer
- audio-set-streamtype
deleted file mode 100644
@@ -1,54 +0,0 @@
-.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
-.. c:namespace:: DTV.video
-
-.. _VIDEO_CLEAR_BUFFER:
-
-==================
-VIDEO_CLEAR_BUFFER
-==================
-
-Name
-----
-
-VIDEO_CLEAR_BUFFER
-
-.. attention:: This ioctl is deprecated.
-
-Synopsis
---------
-
-.. c:macro:: VIDEO_CLEAR_BUFFER
-
-``int ioctl(fd, VIDEO_CLEAR_BUFFER)``
-
-Arguments
----------
-
-.. flat-table::
- :header-rows: 0
- :stub-columns: 0
-
- - .. row 1
-
- - int fd
-
- - File descriptor returned by a previous call to open().
-
- - .. row 2
-
- - int request
-
- - Equals VIDEO_CLEAR_BUFFER for this command.
-
-Description
------------
-
-This ioctl call clears all video buffers in the driver and in the
-decoder hardware.
-
-Return Value
-------------
-
-On success 0 is returned, on error -1 and the ``errno`` variable is set
-appropriately. The generic error codes are described at the
-:ref:`Generic Error Codes <gen-errors>` chapter.
deleted file mode 100644
@@ -1,96 +0,0 @@
-.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
-.. c:namespace:: DTV.video
-
-.. _VIDEO_COMMAND:
-
-=============
-VIDEO_COMMAND
-=============
-
-Name
-----
-
-VIDEO_COMMAND
-
-.. attention:: This ioctl is deprecated.
-
-Synopsis
---------
-
-.. c:macro:: VIDEO_COMMAND
-
-``int ioctl(int fd, VIDEO_COMMAND, struct video_command *cmd)``
-
-Arguments
----------
-
-.. flat-table::
- :header-rows: 0
- :stub-columns: 0
-
- - .. row 1
-
- - int fd
-
- - File descriptor returned by a previous call to open().
-
- - .. row 2
-
- - int request
-
- - Equals VIDEO_COMMAND for this command.
-
- - .. row 3
-
- - struct video_command \*cmd
-
- - Commands the decoder.
-
-Description
------------
-
-This ioctl is obsolete. Do not use in new drivers. For V4L2 decoders
-this ioctl has been replaced by the
-:ref:`VIDIOC_DECODER_CMD` ioctl.
-
-This ioctl commands the decoder. The ``video_command`` struct is a
-subset of the ``v4l2_decoder_cmd`` struct, so refer to the
-:ref:`VIDIOC_DECODER_CMD` documentation for
-more information.
-
-.. c:type:: video_command
-
-.. code-block:: c
-
- /* The structure must be zeroed before use by the application
- This ensures it can be extended safely in the future. */
- struct video_command {
- __u32 cmd;
- __u32 flags;
- union {
- struct {
- __u64 pts;
- } stop;
-
- struct {
- /* 0 or 1000 specifies normal speed,
- 1 specifies forward single stepping,
- -1 specifies backward single stepping,
- >1: playback at speed/1000 of the normal speed,
- <-1: reverse playback at (-speed/1000) of the normal speed. */
- __s32 speed;
- __u32 format;
- } play;
-
- struct {
- __u32 data[16];
- } raw;
- };
- };
-
-Return Value
-------------
-
-On success 0 is returned, on error -1 and the ``errno`` variable is set
-appropriately. The generic error codes are described at the
-:ref:`Generic Error Codes <gen-errors>` chapter.
deleted file mode 100644
@@ -1,57 +0,0 @@
-.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
-.. c:namespace:: DTV.video
-
-.. _VIDEO_CONTINUE:
-
-==============
-VIDEO_CONTINUE
-==============
-
-Name
-----
-
-VIDEO_CONTINUE
-
-.. attention:: This ioctl is deprecated.
-
-Synopsis
---------
-
-.. c:macro:: VIDEO_CONTINUE
-
-``int ioctl(fd, VIDEO_CONTINUE)``
-
-Arguments
----------
-
-.. flat-table::
- :header-rows: 0
- :stub-columns: 0
-
- - .. row 1
-
- - int fd
-
- - File descriptor returned by a previous call to open().
-
- - .. row 2
-
- - int request
-
- - Equals VIDEO_CONTINUE for this command.
-
-Description
------------
-
-This ioctl is for Digital TV devices only. To control a V4L2 decoder use the
-V4L2 :ref:`VIDIOC_DECODER_CMD` instead.
-
-This ioctl call restarts decoding and playing processes of the video
-stream which was played before a call to VIDEO_FREEZE was made.
-
-Return Value
-------------
-
-On success 0 is returned, on error -1 and the ``errno`` variable is set
-appropriately. The generic error codes are described at the
-:ref:`Generic Error Codes <gen-errors>` chapter.
deleted file mode 100644
@@ -1,72 +0,0 @@
-.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
-.. c:namespace:: DTV.video
-
-.. _VIDEO_FAST_FORWARD:
-
-==================
-VIDEO_FAST_FORWARD
-==================
-
-Name
-----
-
-VIDEO_FAST_FORWARD
-
-.. attention:: This ioctl is deprecated.
-
-Synopsis
---------
-
-.. c:macro:: VIDEO_FAST_FORWARD
-
-``int ioctl(fd, VIDEO_FAST_FORWARD, int nFrames)``
-
-Arguments
----------
-
-.. flat-table::
- :header-rows: 0
- :stub-columns: 0
-
- - .. row 1
-
- - int fd
-
- - File descriptor returned by a previous call to open().
-
- - .. row 2
-
- - int request
-
- - Equals VIDEO_FAST_FORWARD for this command.
-
- - .. row 3
-
- - int nFrames
-
- - The number of frames to skip.
-
-Description
------------
-
-This ioctl call asks the Video Device to skip decoding of N number of
-I-frames. This call can only be used if VIDEO_SOURCE_MEMORY is
-selected.
-
-Return Value
-------------
-
-On success 0 is returned, on error -1 and the ``errno`` variable is set
-appropriately. The generic error codes are described at the
-:ref:`Generic Error Codes <gen-errors>` chapter.
-
-
-.. flat-table::
- :header-rows: 0
- :stub-columns: 0
-
- - .. row 1
-
- - ``EPERM``
-
- - Mode VIDEO_SOURCE_MEMORY not selected.
deleted file mode 100644
@@ -1,51 +0,0 @@
-.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
-.. c:namespace:: DTV.video
-
-.. _video_fclose:
-
-=================
-dvb video close()
-=================
-
-Name
-----
-
-dvb video close()
-
-.. attention:: This ioctl is deprecated.
-
-Synopsis
---------
-
-.. c:function:: int close(int fd)
-
-Arguments
----------
-
-.. flat-table::
- :header-rows: 0
- :stub-columns: 0
-
- - .. row 1
-
- - int fd
-
- - File descriptor returned by a previous call to open().
-
-Description
------------
-
-This system call closes a previously opened video device.
-
-Return Value
-------------
-
-.. flat-table::
- :header-rows: 0
- :stub-columns: 0
-
- - .. row 1
-
- - ``EBADF``
-
- - fd is not a valid open file descriptor.
deleted file mode 100644
@@ -1,111 +0,0 @@
-.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
-.. c:namespace:: DTV.video
-
-.. _video_fopen:
-
-================
-dvb video open()
-================
-
-Name
-----
-
-dvb video open()
-
-.. attention:: This ioctl is deprecated.
-
-Synopsis
---------
-
-.. c:function:: int open(const char *deviceName, int flags)
-
-Arguments
----------
-
-.. flat-table::
- :header-rows: 0
- :stub-columns: 0
-
- - .. row 1
-
- - const char \*deviceName
-
- - Name of specific video device.
-
- - .. row 2
-
- - int flags
-
- - A bit-wise OR of the following flags:
-
- - .. row 3
-
- -
- - O_RDONLY read-only access
-
- - .. row 4
-
- -
- - O_RDWR read/write access
-
- - .. row 5
-
- -
- - O_NONBLOCK open in non-blocking mode
-
- - .. row 6
-
- -
- - (blocking mode is the default)
-
-Description
------------
-
-This system call opens a named video device (e.g.
-/dev/dvb/adapter0/video0) for subsequent use.
-
-When an open() call has succeeded, the device will be ready for use. The
-significance of blocking or non-blocking mode is described in the
-documentation for functions where there is a difference. It does not
-affect the semantics of the open() call itself. A device opened in
-blocking mode can later be put into non-blocking mode (and vice versa)
-using the F_SETFL command of the fcntl system call. This is a standard
-system call, documented in the Linux manual page for fcntl. Only one
-user can open the Video Device in O_RDWR mode. All other attempts to
-open the device in this mode will fail, and an error-code will be
-returned. If the Video Device is opened in O_RDONLY mode, the only
-ioctl call that can be used is VIDEO_GET_STATUS. All other call will
-return an error code.
-
-Return Value
-------------
-
-.. tabularcolumns:: |p{2.5cm}|p{15.0cm}|
-
-.. flat-table::
- :header-rows: 0
- :stub-columns: 0
-
- - .. row 1
-
- - ``ENODEV``
-
- - Device driver not loaded/available.
-
- - .. row 2
-
- - ``EINTERNAL``
-
- - Internal error.
-
- - .. row 3
-
- - ``EBUSY``
-
- - Device or resource busy.
-
- - .. row 4
-
- - ``EINVAL``
-
- - Invalid argument.
deleted file mode 100644
@@ -1,61 +0,0 @@
-.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
-.. c:namespace:: DTV.video
-
-.. _VIDEO_FREEZE:
-
-============
-VIDEO_FREEZE
-============
-
-Name
-----
-
-VIDEO_FREEZE
-
-.. attention:: This ioctl is deprecated.
-
-Synopsis
---------
-
-.. c:macro:: VIDEO_FREEZE
-
-``int ioctl(fd, VIDEO_FREEZE)``
-
-Arguments
----------
-
-.. flat-table::
- :header-rows: 0
- :stub-columns: 0
-
- - .. row 1
-
- - int fd
-
- - File descriptor returned by a previous call to open().
-
- - .. row 2
-
- - int request
-
- - Equals VIDEO_FREEZE for this command.
-
-Description
------------
-
-This ioctl is for Digital TV devices only. To control a V4L2 decoder use the
-V4L2 :ref:`VIDIOC_DECODER_CMD` instead.
-
-This ioctl call suspends the live video stream being played. Decoding
-and playing are frozen. It is then possible to restart the decoding and
-playing process of the video stream using the VIDEO_CONTINUE command.
-If VIDEO_SOURCE_MEMORY is selected in the ioctl call
-VIDEO_SELECT_SOURCE, the Digital TV subsystem will not decode any more data
-until the ioctl call VIDEO_CONTINUE or VIDEO_PLAY is performed.
-
-Return Value
-------------
-
-On success 0 is returned, on error -1 and the ``errno`` variable is set
-appropriately. The generic error codes are described at the
-:ref:`Generic Error Codes <gen-errors>` chapter.
deleted file mode 100644
@@ -1,79 +0,0 @@
-.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
-.. c:namespace:: DTV.video
-
-.. _video_fwrite:
-
-=================
-dvb video write()
-=================
-
-Name
-----
-
-dvb video write()
-
-.. attention:: This ioctl is deprecated.
-
-Synopsis
---------
-
-.. c:function:: size_t write(int fd, const void *buf, size_t count)
-
-Arguments
----------
-
-.. flat-table::
- :header-rows: 0
- :stub-columns: 0
-
- - .. row 1
-
- - int fd
-
- - File descriptor returned by a previous call to open().
-
- - .. row 2
-
- - void \*buf
-
- - Pointer to the buffer containing the PES data.
-
- - .. row 3
-
- - size_t count
-
- - Size of buf.
-
-Description
------------
-
-This system call can only be used if VIDEO_SOURCE_MEMORY is selected
-in the ioctl call VIDEO_SELECT_SOURCE. The data provided shall be in
-PES format, unless the capability allows other formats. If O_NONBLOCK
-is not specified the function will block until buffer space is
-available. The amount of data to be transferred is implied by count.
-
-Return Value
-------------
-
-.. flat-table::
- :header-rows: 0
- :stub-columns: 0
-
- - .. row 1
-
- - ``EPERM``
-
- - Mode VIDEO_SOURCE_MEMORY not selected.
-
- - .. row 2
-
- - ``ENOMEM``
-
- - Attempted to write more data than the internal buffer can hold.
-
- - .. row 3
-
- - ``EBADF``
-
- - fd is not a valid open file descriptor.
deleted file mode 100644
@@ -1,61 +0,0 @@
-.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
-.. c:namespace:: DTV.video
-
-.. _VIDEO_GET_CAPABILITIES:
-
-======================
-VIDEO_GET_CAPABILITIES
-======================
-
-Name
-----
-
-VIDEO_GET_CAPABILITIES
-
-.. attention:: This ioctl is deprecated.
-
-Synopsis
---------
-
-.. c:macro:: VIDEO_GET_CAPABILITIES
-
-``int ioctl(fd, VIDEO_GET_CAPABILITIES, unsigned int *cap)``
-
-Arguments
----------
-
-.. flat-table::
- :header-rows: 0
- :stub-columns: 0
-
- - .. row 1
-
- - int fd
-
- - File descriptor returned by a previous call to open().
-
- - .. row 2
-
- - int request
-
- - Equals VIDEO_GET_CAPABILITIES for this command.
-
- - .. row 3
-
- - unsigned int \*cap
-
- - Pointer to a location where to store the capability information.
-
-Description
------------
-
-This ioctl call asks the video device about its decoding capabilities.
-On success it returns and integer which has bits set according to the
-defines in section ??.
-
-Return Value
-------------
-
-On success 0 is returned, on error -1 and the ``errno`` variable is set
-appropriately. The generic error codes are described at the
-:ref:`Generic Error Codes <gen-errors>` chapter.
deleted file mode 100644
@@ -1,105 +0,0 @@
-.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
-.. c:namespace:: DTV.video
-
-.. _VIDEO_GET_EVENT:
-
-===============
-VIDEO_GET_EVENT
-===============
-
-Name
-----
-
-VIDEO_GET_EVENT
-
-.. attention:: This ioctl is deprecated.
-
-Synopsis
---------
-
-.. c:macro:: VIDEO_GET_EVENT
-
-``int ioctl(fd, VIDEO_GET_EVENT, struct video_event *ev)``
-
-Arguments
----------
-
-.. flat-table::
- :header-rows: 0
- :stub-columns: 0
-
- - .. row 1
-
- - int fd
-
- - File descriptor returned by a previous call to open().
-
- - .. row 2
-
- - int request
-
- - Equals VIDEO_GET_EVENT for this command.
-
- - .. row 3
-
- - struct video_event \*ev
-
- - Points to the location where the event, if any, is to be stored.
-
-Description
------------
-
-This ioctl is for Digital TV devices only. To get events from a V4L2 decoder
-use the V4L2 :ref:`VIDIOC_DQEVENT` ioctl instead.
-
-This ioctl call returns an event of type video_event if available. If
-an event is not available, the behavior depends on whether the device is
-in blocking or non-blocking mode. In the latter case, the call fails
-immediately with errno set to ``EWOULDBLOCK``. In the former case, the call
-blocks until an event becomes available. The standard Linux poll()
-and/or select() system calls can be used with the device file descriptor
-to watch for new events. For select(), the file descriptor should be
-included in the exceptfds argument, and for poll(), POLLPRI should be
-specified as the wake-up condition. Read-only permissions are sufficient
-for this ioctl call.
-
-.. c:type:: video_event
-
-.. code-block:: c
-
- struct video_event {
- __s32 type;
- #define VIDEO_EVENT_SIZE_CHANGED 1
- #define VIDEO_EVENT_FRAME_RATE_CHANGED 2
- #define VIDEO_EVENT_DECODER_STOPPED 3
- #define VIDEO_EVENT_VSYNC 4
- long timestamp;
- union {
- video_size_t size;
- unsigned int frame_rate; /* in frames per 1000sec */
- unsigned char vsync_field; /* unknown/odd/even/progressive */
- } u;
- };
-
-Return Value
-------------
-
-On success 0 is returned, on error -1 and the ``errno`` variable is set
-appropriately. The generic error codes are described at the
-:ref:`Generic Error Codes <gen-errors>` chapter.
-
-.. flat-table::
- :header-rows: 0
- :stub-columns: 0
-
- - .. row 1
-
- - ``EWOULDBLOCK``
-
- - There is no event pending, and the device is in non-blocking mode.
-
- - .. row 2
-
- - ``EOVERFLOW``
-
- - Overflow in event queue - one or more events were lost.
deleted file mode 100644
@@ -1,65 +0,0 @@
-.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
-.. c:namespace:: DTV.video
-
-.. _VIDEO_GET_FRAME_COUNT:
-
-=====================
-VIDEO_GET_FRAME_COUNT
-=====================
-
-Name
-----
-
-VIDEO_GET_FRAME_COUNT
-
-.. attention:: This ioctl is deprecated.
-
-Synopsis
---------
-
-.. c:macro:: VIDEO_GET_FRAME_COUNT
-
-``int ioctl(int fd, VIDEO_GET_FRAME_COUNT, __u64 *pts)``
-
-Arguments
----------
-
-.. flat-table::
- :header-rows: 0
- :stub-columns: 0
-
- - .. row 1
-
- - int fd
-
- - File descriptor returned by a previous call to open().
-
- - .. row 2
-
- - int request
-
- - Equals VIDEO_GET_FRAME_COUNT for this command.
-
- - .. row 3
-
- - __u64 \*pts
-
- - Returns the number of frames displayed since the decoder was
- started.
-
-Description
------------
-
-This ioctl is obsolete. Do not use in new drivers. For V4L2 decoders
-this ioctl has been replaced by the ``V4L2_CID_MPEG_VIDEO_DEC_FRAME``
-control.
-
-This ioctl call asks the Video Device to return the number of displayed
-frames since the decoder was started.
-
-Return Value
-------------
-
-On success 0 is returned, on error -1 and the ``errno`` variable is set
-appropriately. The generic error codes are described at the
-:ref:`Generic Error Codes <gen-errors>` chapter.
deleted file mode 100644
@@ -1,69 +0,0 @@
-.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
-.. c:namespace:: DTV.video
-
-.. _VIDEO_GET_PTS:
-
-=============
-VIDEO_GET_PTS
-=============
-
-Name
-----
-
-VIDEO_GET_PTS
-
-.. attention:: This ioctl is deprecated.
-
-Synopsis
---------
-
-.. c:macro:: VIDEO_GET_PTS
-
-``int ioctl(int fd, VIDEO_GET_PTS, __u64 *pts)``
-
-Arguments
----------
-
-.. flat-table::
- :header-rows: 0
- :stub-columns: 0
-
- - .. row 1
-
- - int fd
-
- - File descriptor returned by a previous call to open().
-
- - .. row 2
-
- - int request
-
- - Equals VIDEO_GET_PTS for this command.
-
- - .. row 3
-
- - __u64 \*pts
-
- - Returns the 33-bit timestamp as defined in ITU T-REC-H.222.0 /
- ISO/IEC 13818-1.
-
- The PTS should belong to the currently played frame if possible,
- but may also be a value close to it like the PTS of the last
- decoded frame or the last PTS extracted by the PES parser.
-
-Description
------------
-
-This ioctl is obsolete. Do not use in new drivers. For V4L2 decoders
-this ioctl has been replaced by the ``V4L2_CID_MPEG_VIDEO_DEC_PTS``
-control.
-
-This ioctl call asks the Video Device to return the current PTS
-timestamp.
-
-Return Value
-------------
-
-On success 0 is returned, on error -1 and the ``errno`` variable is set
-appropriately. The generic error codes are described at the
-:ref:`Generic Error Codes <gen-errors>` chapter.
deleted file mode 100644
@@ -1,69 +0,0 @@
-.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
-.. c:namespace:: DTV.video
-
-.. _VIDEO_GET_SIZE:
-
-==============
-VIDEO_GET_SIZE
-==============
-
-Name
-----
-
-VIDEO_GET_SIZE
-
-.. attention:: This ioctl is deprecated.
-
-Synopsis
---------
-
-.. c:macro:: VIDEO_GET_SIZE
-
-``int ioctl(int fd, VIDEO_GET_SIZE, video_size_t *size)``
-
-Arguments
----------
-
-.. flat-table::
- :header-rows: 0
- :stub-columns: 0
-
- - .. row 1
-
- - int fd
-
- - File descriptor returned by a previous call to open().
-
- - .. row 2
-
- - int request
-
- - Equals VIDEO_GET_SIZE for this command.
-
- - .. row 3
-
- - video_size_t \*size
-
- - Returns the size and aspect ratio.
-
-Description
------------
-
-This ioctl returns the size and aspect ratio.
-
-.. c:type:: video_size_t
-
-.. code-block::c
-
- typedef struct {
- int w;
- int h;
- video_format_t aspect_ratio;
- } video_size_t;
-
-Return Value
-------------
-
-On success 0 is returned, on error -1 and the ``errno`` variable is set
-appropriately. The generic error codes are described at the
-:ref:`Generic Error Codes <gen-errors>` chapter.
deleted file mode 100644
@@ -1,72 +0,0 @@
-.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
-.. c:namespace:: DTV.video
-
-.. _VIDEO_GET_STATUS:
-
-================
-VIDEO_GET_STATUS
-================
-
-Name
-----
-
-VIDEO_GET_STATUS
-
-.. attention:: This ioctl is deprecated.
-
-Synopsis
---------
-
-.. c:macro:: VIDEO_GET_STATUS
-
-``int ioctl(fd, VIDEO_GET_STATUS, struct video_status *status)``
-
-Arguments
----------
-
-.. flat-table::
- :header-rows: 0
- :stub-columns: 0
-
- - .. row 1
-
- - int fd
-
- - File descriptor returned by a previous call to open().
-
- - .. row 2
-
- - int request
-
- - Equals VIDEO_GET_STATUS for this command.
-
- - .. row 3
-
- - struct video_status \*status
-
- - Returns the current status of the Video Device.
-
-Description
------------
-
-This ioctl call asks the Video Device to return the current status of
-the device.
-
-.. c:type:: video_status
-
-.. code-block:: c
-
- struct video_status {
- int video_blank; /* blank video on freeze? */
- video_play_state_t play_state; /* current state of playback */
- video_stream_source_t stream_source; /* current source (demux/memory) */
- video_format_t video_format; /* current aspect ratio of stream*/
- video_displayformat_t display_format;/* selected cropping mode */
- };
-
-Return Value
-------------
-
-On success 0 is returned, on error -1 and the ``errno`` variable is set
-appropriately. The generic error codes are described at the
-:ref:`Generic Error Codes <gen-errors>` chapter.
deleted file mode 100644
@@ -1,57 +0,0 @@
-.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
-.. c:namespace:: DTV.video
-
-.. _VIDEO_PLAY:
-
-==========
-VIDEO_PLAY
-==========
-
-Name
-----
-
-VIDEO_PLAY
-
-.. attention:: This ioctl is deprecated.
-
-Synopsis
---------
-
-.. c:macro:: VIDEO_PLAY
-
-``int ioctl(fd, VIDEO_PLAY)``
-
-Arguments
----------
-
-.. flat-table::
- :header-rows: 0
- :stub-columns: 0
-
- - .. row 1
-
- - int fd
-
- - File descriptor returned by a previous call to open().
-
- - .. row 2
-
- - int request
-
- - Equals VIDEO_PLAY for this command.
-
-Description
------------
-
-This ioctl is for Digital TV devices only. To control a V4L2 decoder use the
-V4L2 :ref:`VIDIOC_DECODER_CMD` instead.
-
-This ioctl call asks the Video Device to start playing a video stream
-from the selected source.
-
-Return Value
-------------
-
-On success 0 is returned, on error -1 and the ``errno`` variable is set
-appropriately. The generic error codes are described at the
-:ref:`Generic Error Codes <gen-errors>` chapter.
deleted file mode 100644
@@ -1,76 +0,0 @@
-.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
-.. c:namespace:: DTV.video
-
-.. _VIDEO_SELECT_SOURCE:
-
-===================
-VIDEO_SELECT_SOURCE
-===================
-
-Name
-----
-
-VIDEO_SELECT_SOURCE
-
-.. attention:: This ioctl is deprecated.
-
-Synopsis
---------
-
-.. c:macro:: VIDEO_SELECT_SOURCE
-
-``int ioctl(fd, VIDEO_SELECT_SOURCE, video_stream_source_t source)``
-
-Arguments
----------
-
-.. flat-table::
- :header-rows: 0
- :stub-columns: 0
-
- - .. row 1
-
- - int fd
-
- - File descriptor returned by a previous call to open().
-
- - .. row 2
-
- - int request
-
- - Equals VIDEO_SELECT_SOURCE for this command.
-
- - .. row 3
-
- - video_stream_source_t source
-
- - Indicates which source shall be used for the Video stream.
-
-Description
------------
-
-This ioctl is for Digital TV devices only. This ioctl was also supported by the
-V4L2 ivtv driver, but that has been replaced by the ivtv-specific
-``IVTV_IOC_PASSTHROUGH_MODE`` ioctl.
-
-This ioctl call informs the video device which source shall be used for
-the input data. The possible sources are demux or memory. If memory is
-selected, the data is fed to the video device through the write command.
-
-.. c:type:: video_stream_source_t
-
-.. code-block:: c
-
- typedef enum {
- VIDEO_SOURCE_DEMUX, /* Select the demux as the main source */
- VIDEO_SOURCE_MEMORY /* If this source is selected, the stream
- comes from the user through the write
- system call */
- } video_stream_source_t;
-
-Return Value
-------------
-
-On success 0 is returned, on error -1 and the ``errno`` variable is set
-appropriately. The generic error codes are described at the
-:ref:`Generic Error Codes <gen-errors>` chapter.
deleted file mode 100644
@@ -1,64 +0,0 @@
-.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
-.. c:namespace:: DTV.video
-
-.. _VIDEO_SET_BLANK:
-
-===============
-VIDEO_SET_BLANK
-===============
-
-Name
-----
-
-VIDEO_SET_BLANK
-
-.. attention:: This ioctl is deprecated.
-
-Synopsis
---------
-
-.. c:macro:: VIDEO_SET_BLANK
-
-``int ioctl(fd, VIDEO_SET_BLANK, boolean mode)``
-
-Arguments
----------
-
-.. flat-table::
- :header-rows: 0
- :stub-columns: 0
-
- - .. row 1
-
- - int fd
-
- - File descriptor returned by a previous call to open().
-
- - .. row 2
-
- - int request
-
- - Equals VIDEO_SET_BLANK for this command.
-
- - .. row 3
-
- - boolean mode
-
- - TRUE: Blank screen when stop.
-
- - .. row 4
-
- -
- - FALSE: Show last decoded frame.
-
-Description
------------
-
-This ioctl call asks the Video Device to blank out the picture.
-
-Return Value
-------------
-
-On success 0 is returned, on error -1 and the ``errno`` variable is set
-appropriately. The generic error codes are described at the
-:ref:`Generic Error Codes <gen-errors>` chapter.
deleted file mode 100644
@@ -1,60 +0,0 @@
-.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
-.. c:namespace:: DTV.video
-
-.. _VIDEO_SET_DISPLAY_FORMAT:
-
-========================
-VIDEO_SET_DISPLAY_FORMAT
-========================
-
-Name
-----
-
-VIDEO_SET_DISPLAY_FORMAT
-
-.. attention:: This ioctl is deprecated.
-
-Synopsis
---------
-
-.. c:macro:: VIDEO_SET_DISPLAY_FORMAT
-
-``int ioctl(fd, VIDEO_SET_DISPLAY_FORMAT)``
-
-Arguments
----------
-
-.. flat-table::
- :header-rows: 0
- :stub-columns: 0
-
- - .. row 1
-
- - int fd
-
- - File descriptor returned by a previous call to open().
-
- - .. row 2
-
- - int request
-
- - Equals VIDEO_SET_DISPLAY_FORMAT for this command.
-
- - .. row 3
-
- - video_display_format_t format
-
- - Selects the video format to be used.
-
-Description
------------
-
-This ioctl call asks the Video Device to select the video format to be
-applied by the MPEG chip on the video.
-
-Return Value
-------------
-
-On success 0 is returned, on error -1 and the ``errno`` variable is set
-appropriately. The generic error codes are described at the
-:ref:`Generic Error Codes <gen-errors>` chapter.
deleted file mode 100644
@@ -1,82 +0,0 @@
-.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
-.. c:namespace:: DTV.video
-
-.. _VIDEO_SET_FORMAT:
-
-================
-VIDEO_SET_FORMAT
-================
-
-Name
-----
-
-VIDEO_SET_FORMAT
-
-.. attention:: This ioctl is deprecated.
-
-Synopsis
---------
-
-.. c:macro:: VIDEO_SET_FORMAT
-
-``int ioctl(fd, VIDEO_SET_FORMAT, video_format_t format)``
-
-Arguments
----------
-
-.. flat-table::
- :header-rows: 0
- :stub-columns: 0
-
- - .. row 1
-
- - int fd
-
- - File descriptor returned by a previous call to open().
-
- - .. row 2
-
- - int request
-
- - Equals VIDEO_SET_FORMAT for this command.
-
- - .. row 3
-
- - video_format_t format
-
- - video format of TV as defined in section ??.
-
-Description
------------
-
-This ioctl sets the screen format (aspect ratio) of the connected output
-device (TV) so that the output of the decoder can be adjusted
-accordingly.
-
-.. c:type:: video_format_t
-
-.. code-block:: c
-
- typedef enum {
- VIDEO_FORMAT_4_3, /* Select 4:3 format */
- VIDEO_FORMAT_16_9, /* Select 16:9 format. */
- VIDEO_FORMAT_221_1 /* 2.21:1 */
- } video_format_t;
-
-Return Value
-------------
-
-On success 0 is returned, on error -1 and the ``errno`` variable is set
-appropriately. The generic error codes are described at the
-:ref:`Generic Error Codes <gen-errors>` chapter.
-
-
-.. flat-table::
- :header-rows: 0
- :stub-columns: 0
-
- - .. row 1
-
- - ``EINVAL``
-
- - format is not a valid video format.
deleted file mode 100644
@@ -1,61 +0,0 @@
-.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
-.. c:namespace:: DTV.video
-
-.. _VIDEO_SET_STREAMTYPE:
-
-====================
-VIDEO_SET_STREAMTYPE
-====================
-
-Name
-----
-
-VIDEO_SET_STREAMTYPE
-
-.. attention:: This ioctl is deprecated.
-
-Synopsis
---------
-
-.. c:macro:: VIDEO_SET_STREAMTYPE
-
-``int ioctl(fd, VIDEO_SET_STREAMTYPE, int type)``
-
-Arguments
----------
-
-.. flat-table::
- :header-rows: 0
- :stub-columns: 0
-
- - .. row 1
-
- - int fd
-
- - File descriptor returned by a previous call to open().
-
- - .. row 2
-
- - int request
-
- - Equals VIDEO_SET_STREAMTYPE for this command.
-
- - .. row 3
-
- - int type
-
- - stream type
-
-Description
------------
-
-This ioctl tells the driver which kind of stream to expect being written
-to it. If this call is not used the default of video PES is used. Some
-drivers might not support this call and always expect PES.
-
-Return Value
-------------
-
-On success 0 is returned, on error -1 and the ``errno`` variable is set
-appropriately. The generic error codes are described at the
-:ref:`Generic Error Codes <gen-errors>` chapter.
deleted file mode 100644
@@ -1,72 +0,0 @@
-.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
-.. c:namespace:: DTV.video
-
-.. _VIDEO_SLOWMOTION:
-
-================
-VIDEO_SLOWMOTION
-================
-
-Name
-----
-
-VIDEO_SLOWMOTION
-
-.. attention:: This ioctl is deprecated.
-
-Synopsis
---------
-
-.. c:macro:: VIDEO_SLOWMOTION
-
-``int ioctl(fd, VIDEO_SLOWMOTION, int nFrames)``
-
-Arguments
----------
-
-.. flat-table::
- :header-rows: 0
- :stub-columns: 0
-
- - .. row 1
-
- - int fd
-
- - File descriptor returned by a previous call to open().
-
- - .. row 2
-
- - int request
-
- - Equals VIDEO_SLOWMOTION for this command.
-
- - .. row 3
-
- - int nFrames
-
- - The number of times to repeat each frame.
-
-Description
------------
-
-This ioctl call asks the video device to repeat decoding frames N number
-of times. This call can only be used if VIDEO_SOURCE_MEMORY is
-selected.
-
-Return Value
-------------
-
-On success 0 is returned, on error -1 and the ``errno`` variable is set
-appropriately. The generic error codes are described at the
-:ref:`Generic Error Codes <gen-errors>` chapter.
-
-
-.. flat-table::
- :header-rows: 0
- :stub-columns: 0
-
- - .. row 1
-
- - ``EPERM``
-
- - Mode VIDEO_SOURCE_MEMORY not selected.
deleted file mode 100644
@@ -1,61 +0,0 @@
-.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
-.. c:namespace:: DTV.video
-
-.. _VIDEO_STILLPICTURE:
-
-==================
-VIDEO_STILLPICTURE
-==================
-
-Name
-----
-
-VIDEO_STILLPICTURE
-
-.. attention:: This ioctl is deprecated.
-
-Synopsis
---------
-
-.. c:macro:: VIDEO_STILLPICTURE
-
-``int ioctl(fd, VIDEO_STILLPICTURE, struct video_still_picture *sp)``
-
-Arguments
----------
-
-.. flat-table::
- :header-rows: 0
- :stub-columns: 0
-
- - .. row 1
-
- - int fd
-
- - File descriptor returned by a previous call to open().
-
- - .. row 2
-
- - int request
-
- - Equals VIDEO_STILLPICTURE for this command.
-
- - .. row 3
-
- - struct video_still_picture \*sp
-
- - Pointer to a location where an I-frame and size is stored.
-
-Description
------------
-
-This ioctl call asks the Video Device to display a still picture
-(I-frame). The input data shall contain an I-frame. If the pointer is
-NULL, then the current displayed still picture is blanked.
-
-Return Value
-------------
-
-On success 0 is returned, on error -1 and the ``errno`` variable is set
-appropriately. The generic error codes are described at the
-:ref:`Generic Error Codes <gen-errors>` chapter.
deleted file mode 100644
@@ -1,74 +0,0 @@
-.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
-.. c:namespace:: DTV.video
-
-.. _VIDEO_STOP:
-
-==========
-VIDEO_STOP
-==========
-
-Name
-----
-
-VIDEO_STOP
-
-.. attention:: This ioctl is deprecated.
-
-Synopsis
---------
-
-.. c:macro:: VIDEO_STOP
-
-``int ioctl(fd, VIDEO_STOP, boolean mode)``
-
-Arguments
----------
-
-.. flat-table::
- :header-rows: 0
- :stub-columns: 0
-
- - .. row 1
-
- - int fd
-
- - File descriptor returned by a previous call to open().
-
- - .. row 2
-
- - int request
-
- - Equals VIDEO_STOP for this command.
-
- - .. row 3
-
- - Boolean mode
-
- - Indicates how the screen shall be handled.
-
- - .. row 4
-
- -
- - TRUE: Blank screen when stop.
-
- - .. row 5
-
- -
- - FALSE: Show last decoded frame.
-
-Description
------------
-
-This ioctl is for Digital TV devices only. To control a V4L2 decoder use the
-V4L2 :ref:`VIDIOC_DECODER_CMD` instead.
-
-This ioctl call asks the Video Device to stop playing the current
-stream. Depending on the input parameter, the screen can be blanked out
-or displaying the last decoded frame.
-
-Return Value
-------------
-
-On success 0 is returned, on error -1 and the ``errno`` variable is set
-appropriately. The generic error codes are described at the
-:ref:`Generic Error Codes <gen-errors>` chapter.
deleted file mode 100644
@@ -1,66 +0,0 @@
-.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
-.. c:namespace:: DTV.video
-
-.. _VIDEO_TRY_COMMAND:
-
-=================
-VIDEO_TRY_COMMAND
-=================
-
-Name
-----
-
-VIDEO_TRY_COMMAND
-
-.. attention:: This ioctl is deprecated.
-
-Synopsis
---------
-
-.. c:macro:: VIDEO_TRY_COMMAND
-
-``int ioctl(int fd, VIDEO_TRY_COMMAND, struct video_command *cmd)``
-
-Arguments
----------
-
-.. flat-table::
- :header-rows: 0
- :stub-columns: 0
-
- - .. row 1
-
- - int fd
-
- - File descriptor returned by a previous call to open().
-
- - .. row 2
-
- - int request
-
- - Equals VIDEO_TRY_COMMAND for this command.
-
- - .. row 3
-
- - struct video_command \*cmd
-
- - Try a decoder command.
-
-Description
------------
-
-This ioctl is obsolete. Do not use in new drivers. For V4L2 decoders
-this ioctl has been replaced by the
-:ref:`VIDIOC_TRY_DECODER_CMD <VIDIOC_DECODER_CMD>` ioctl.
-
-This ioctl tries a decoder command. The ``video_command`` struct is a
-subset of the ``v4l2_decoder_cmd`` struct, so refer to the
-:ref:`VIDIOC_TRY_DECODER_CMD <VIDIOC_DECODER_CMD>` documentation
-for more information.
-
-Return Value
-------------
-
-On success 0 is returned, on error -1 and the ``errno`` variable is set
-appropriately. The generic error codes are described at the
-:ref:`Generic Error Codes <gen-errors>` chapter.
deleted file mode 100644
@@ -1,36 +0,0 @@
-.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
-
-.. _dvb_video:
-
-#######################
-Digital TV Video Device
-#######################
-
-The Digital TV video device controls the MPEG2 video decoder of the Digital
-TV hardware. It can be accessed through **/dev/dvb/adapter0/video0**. Data
-types and ioctl definitions can be accessed by including
-**linux/dvb/video.h** in your application.
-
-Note that the Digital TV video device only controls decoding of the MPEG video
-stream, not its presentation on the TV or computer screen. On PCs this
-is typically handled by an associated video4linux device, e.g.
-**/dev/video**, which allows scaling and defining output windows.
-
-Some Digital TV cards don't have their own MPEG decoder, which results in the
-omission of the audio and video device as well as the video4linux
-device.
-
-The ioctls that deal with SPUs (sub picture units) and navigation
-packets are only supported on some MPEG decoders made for DVD playback.
-
-These ioctls were also used by V4L2 to control MPEG decoders implemented
-in V4L2. The use of these ioctls for that purpose has been made obsolete
-and proper V4L2 ioctls or controls have been created to replace that
-functionality.
-
-
-.. toctree::
- :maxdepth: 1
-
- video_types
- video_function_calls
deleted file mode 100644
@@ -1,35 +0,0 @@
-.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
-
-.. _video_function_calls:
-
-********************
-Video Function Calls
-********************
-
-.. toctree::
- :maxdepth: 1
-
- video-fopen
- video-fclose
- video-fwrite
- video-stop
- video-play
- video-freeze
- video-continue
- video-select-source
- video-set-blank
- video-get-status
- video-get-frame-count
- video-get-pts
- video-get-event
- video-command
- video-try-command
- video-get-size
- video-set-display-format
- video-stillpicture
- video-fast-forward
- video-slowmotion
- video-get-capabilities
- video-clear-buffer
- video-set-streamtype
- video-set-format
deleted file mode 100644
@@ -1,248 +0,0 @@
-.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
-
-.. _video_types:
-
-****************
-Video Data Types
-****************
-
-
-.. _video-format-t:
-
-video_format_t
-==============
-
-The ``video_format_t`` data type defined by
-
-
-.. code-block:: c
-
- typedef enum {
- VIDEO_FORMAT_4_3, /* Select 4:3 format */
- VIDEO_FORMAT_16_9, /* Select 16:9 format. */
- VIDEO_FORMAT_221_1 /* 2.21:1 */
- } video_format_t;
-
-is used in the VIDEO_SET_FORMAT function (??) to tell the driver which
-aspect ratio the output hardware (e.g. TV) has. It is also used in the
-data structures video_status (??) returned by VIDEO_GET_STATUS (??)
-and video_event (??) returned by VIDEO_GET_EVENT (??) which report
-about the display format of the current video stream.
-
-
-.. _video-displayformat-t:
-
-video_displayformat_t
-=====================
-
-In case the display format of the video stream and of the display
-hardware differ the application has to specify how to handle the
-cropping of the picture. This can be done using the
-VIDEO_SET_DISPLAY_FORMAT call (??) which accepts
-
-
-.. code-block:: c
-
- typedef enum {
- VIDEO_PAN_SCAN, /* use pan and scan format */
- VIDEO_LETTER_BOX, /* use letterbox format */
- VIDEO_CENTER_CUT_OUT /* use center cut out format */
- } video_displayformat_t;
-
-as argument.
-
-
-.. _video-stream-source-t:
-
-video_stream_source_t
-=====================
-
-The video stream source is set through the VIDEO_SELECT_SOURCE call
-and can take the following values, depending on whether we are replaying
-from an internal (demuxer) or external (user write) source.
-
-
-.. code-block:: c
-
- typedef enum {
- VIDEO_SOURCE_DEMUX, /* Select the demux as the main source */
- VIDEO_SOURCE_MEMORY /* If this source is selected, the stream
- comes from the user through the write
- system call */
- } video_stream_source_t;
-
-VIDEO_SOURCE_DEMUX selects the demultiplexer (fed either by the
-frontend or the DVR device) as the source of the video stream. If
-VIDEO_SOURCE_MEMORY is selected the stream comes from the application
-through the **write()** system call.
-
-
-.. _video-play-state-t:
-
-video_play_state_t
-==================
-
-The following values can be returned by the VIDEO_GET_STATUS call
-representing the state of video playback.
-
-
-.. code-block:: c
-
- typedef enum {
- VIDEO_STOPPED, /* Video is stopped */
- VIDEO_PLAYING, /* Video is currently playing */
- VIDEO_FREEZED /* Video is freezed */
- } video_play_state_t;
-
-
-.. c:type:: video_command
-
-struct video_command
-====================
-
-The structure must be zeroed before use by the application This ensures
-it can be extended safely in the future.
-
-
-.. code-block:: c
-
- struct video_command {
- __u32 cmd;
- __u32 flags;
- union {
- struct {
- __u64 pts;
- } stop;
-
- struct {
- /* 0 or 1000 specifies normal speed,
- 1 specifies forward single stepping,
- -1 specifies backward single stepping,
- >>1: playback at speed/1000 of the normal speed,
- <-1: reverse playback at (-speed/1000) of the normal speed. */
- __s32 speed;
- __u32 format;
- } play;
-
- struct {
- __u32 data[16];
- } raw;
- };
- };
-
-
-.. _video-size-t:
-
-video_size_t
-============
-
-
-.. code-block:: c
-
- typedef struct {
- int w;
- int h;
- video_format_t aspect_ratio;
- } video_size_t;
-
-
-.. c:type:: video_event
-
-struct video_event
-==================
-
-The following is the structure of a video event as it is returned by the
-VIDEO_GET_EVENT call.
-
-
-.. code-block:: c
-
- struct video_event {
- __s32 type;
- #define VIDEO_EVENT_SIZE_CHANGED 1
- #define VIDEO_EVENT_FRAME_RATE_CHANGED 2
- #define VIDEO_EVENT_DECODER_STOPPED 3
- #define VIDEO_EVENT_VSYNC 4
- long timestamp;
- union {
- video_size_t size;
- unsigned int frame_rate; /* in frames per 1000sec */
- unsigned char vsync_field; /* unknown/odd/even/progressive */
- } u;
- };
-
-
-.. c:type:: video_status
-
-struct video_status
-===================
-
-The VIDEO_GET_STATUS call returns the following structure informing
-about various states of the playback operation.
-
-
-.. code-block:: c
-
- struct video_status {
- int video_blank; /* blank video on freeze? */
- video_play_state_t play_state; /* current state of playback */
- video_stream_source_t stream_source; /* current source (demux/memory) */
- video_format_t video_format; /* current aspect ratio of stream */
- video_displayformat_t display_format;/* selected cropping mode */
- };
-
-If video_blank is set video will be blanked out if the channel is
-changed or if playback is stopped. Otherwise, the last picture will be
-displayed. play_state indicates if the video is currently frozen,
-stopped, or being played back. The stream_source corresponds to the
-selected source for the video stream. It can come either from the
-demultiplexer or from memory. The video_format indicates the aspect
-ratio (one of 4:3 or 16:9) of the currently played video stream.
-Finally, display_format corresponds to the selected cropping mode in
-case the source video format is not the same as the format of the output
-device.
-
-
-.. c:type:: video_still_picture
-
-struct video_still_picture
-==========================
-
-An I-frame displayed via the VIDEO_STILLPICTURE call is passed on
-within the following structure.
-
-
-.. code-block:: c
-
- /* pointer to and size of a single iframe in memory */
- struct video_still_picture {
- char *iFrame; /* pointer to a single iframe in memory */
- int32_t size;
- };
-
-
-.. _video_caps:
-
-video capabilities
-==================
-
-A call to VIDEO_GET_CAPABILITIES returns an unsigned integer with the
-following bits set according to the hardwares capabilities.
-
-
-.. code-block:: c
-
- /* bit definitions for capabilities: */
- /* can the hardware decode MPEG1 and/or MPEG2? */
- #define VIDEO_CAP_MPEG1 1
- #define VIDEO_CAP_MPEG2 2
- /* can you send a system and/or program stream to video device?
- (you still have to open the video and the audio device but only
- send the stream to the video device) */
- #define VIDEO_CAP_SYS 4
- #define VIDEO_CAP_PROG 8
- /* can the driver also handle SPU, NAVI and CSS encoded data?
- (CSS API is not present yet) */
- #define VIDEO_CAP_SPU 16
- #define VIDEO_CAP_NAVI 32
- #define VIDEO_CAP_CSS 64
The av7110 driver does not use the vb2 framework for streaming video, instead it uses the old vb1 framework and nobody stepped in to convert this driver to vb2. The hardware is very old, so the decision was made to remove it altogether since we want to get rid of the old vb1 framework. This patch removes the old driver documentation. Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> --- .../av7110/audio-bilingual-channel-select.rst | 58 ---- .../saa7146/av7110/audio-channel-select.rst | 57 ---- .../saa7146/av7110/audio-clear-buffer.rst | 48 ---- .../saa7146/av7110/audio-continue.rst | 48 ---- .../saa7146/av7110/audio-fclose.rst | 51 ---- .../deprecated/saa7146/av7110/audio-fopen.rst | 103 -------- .../saa7146/av7110/audio-fwrite.rst | 79 ------ .../saa7146/av7110/audio-get-capabilities.rst | 54 ---- .../saa7146/av7110/audio-get-status.rst | 54 ---- .../deprecated/saa7146/av7110/audio-pause.rst | 49 ---- .../deprecated/saa7146/av7110/audio-play.rst | 48 ---- .../saa7146/av7110/audio-select-source.rst | 56 ---- .../saa7146/av7110/audio-set-av-sync.rst | 58 ---- .../saa7146/av7110/audio-set-bypass-mode.rst | 62 ----- .../saa7146/av7110/audio-set-id.rst | 59 ----- .../saa7146/av7110/audio-set-mixer.rst | 53 ---- .../saa7146/av7110/audio-set-mute.rst | 62 ----- .../saa7146/av7110/audio-set-streamtype.rst | 66 ----- .../deprecated/saa7146/av7110/audio-stop.rst | 48 ---- .../media/deprecated/saa7146/av7110/audio.rst | 27 -- .../saa7146/av7110/audio_data_types.rst | 116 -------- .../saa7146/av7110/audio_function_calls.rst | 30 --- .../saa7146/av7110/video-clear-buffer.rst | 54 ---- .../saa7146/av7110/video-command.rst | 96 ------- .../saa7146/av7110/video-continue.rst | 57 ---- .../saa7146/av7110/video-fast-forward.rst | 72 ----- .../saa7146/av7110/video-fclose.rst | 51 ---- .../deprecated/saa7146/av7110/video-fopen.rst | 111 -------- .../saa7146/av7110/video-freeze.rst | 61 ----- .../saa7146/av7110/video-fwrite.rst | 79 ------ .../saa7146/av7110/video-get-capabilities.rst | 61 ----- .../saa7146/av7110/video-get-event.rst | 105 -------- .../saa7146/av7110/video-get-frame-count.rst | 65 ----- .../saa7146/av7110/video-get-pts.rst | 69 ----- .../saa7146/av7110/video-get-size.rst | 69 ----- .../saa7146/av7110/video-get-status.rst | 72 ----- .../deprecated/saa7146/av7110/video-play.rst | 57 ---- .../saa7146/av7110/video-select-source.rst | 76 ------ .../saa7146/av7110/video-set-blank.rst | 64 ----- .../av7110/video-set-display-format.rst | 60 ----- .../saa7146/av7110/video-set-format.rst | 82 ------ .../saa7146/av7110/video-set-streamtype.rst | 61 ----- .../saa7146/av7110/video-slowmotion.rst | 72 ----- .../saa7146/av7110/video-stillpicture.rst | 61 ----- .../deprecated/saa7146/av7110/video-stop.rst | 74 ------ .../saa7146/av7110/video-try-command.rst | 66 ----- .../media/deprecated/saa7146/av7110/video.rst | 36 --- .../saa7146/av7110/video_function_calls.rst | 35 --- .../deprecated/saa7146/av7110/video_types.rst | 248 ------------------ 49 files changed, 3300 deletions(-) delete mode 100644 drivers/staging/media/deprecated/saa7146/av7110/audio-bilingual-channel-select.rst delete mode 100644 drivers/staging/media/deprecated/saa7146/av7110/audio-channel-select.rst delete mode 100644 drivers/staging/media/deprecated/saa7146/av7110/audio-clear-buffer.rst delete mode 100644 drivers/staging/media/deprecated/saa7146/av7110/audio-continue.rst delete mode 100644 drivers/staging/media/deprecated/saa7146/av7110/audio-fclose.rst delete mode 100644 drivers/staging/media/deprecated/saa7146/av7110/audio-fopen.rst delete mode 100644 drivers/staging/media/deprecated/saa7146/av7110/audio-fwrite.rst delete mode 100644 drivers/staging/media/deprecated/saa7146/av7110/audio-get-capabilities.rst delete mode 100644 drivers/staging/media/deprecated/saa7146/av7110/audio-get-status.rst delete mode 100644 drivers/staging/media/deprecated/saa7146/av7110/audio-pause.rst delete mode 100644 drivers/staging/media/deprecated/saa7146/av7110/audio-play.rst delete mode 100644 drivers/staging/media/deprecated/saa7146/av7110/audio-select-source.rst delete mode 100644 drivers/staging/media/deprecated/saa7146/av7110/audio-set-av-sync.rst delete mode 100644 drivers/staging/media/deprecated/saa7146/av7110/audio-set-bypass-mode.rst delete mode 100644 drivers/staging/media/deprecated/saa7146/av7110/audio-set-id.rst delete mode 100644 drivers/staging/media/deprecated/saa7146/av7110/audio-set-mixer.rst delete mode 100644 drivers/staging/media/deprecated/saa7146/av7110/audio-set-mute.rst delete mode 100644 drivers/staging/media/deprecated/saa7146/av7110/audio-set-streamtype.rst delete mode 100644 drivers/staging/media/deprecated/saa7146/av7110/audio-stop.rst delete mode 100644 drivers/staging/media/deprecated/saa7146/av7110/audio.rst delete mode 100644 drivers/staging/media/deprecated/saa7146/av7110/audio_data_types.rst delete mode 100644 drivers/staging/media/deprecated/saa7146/av7110/audio_function_calls.rst delete mode 100644 drivers/staging/media/deprecated/saa7146/av7110/video-clear-buffer.rst delete mode 100644 drivers/staging/media/deprecated/saa7146/av7110/video-command.rst delete mode 100644 drivers/staging/media/deprecated/saa7146/av7110/video-continue.rst delete mode 100644 drivers/staging/media/deprecated/saa7146/av7110/video-fast-forward.rst delete mode 100644 drivers/staging/media/deprecated/saa7146/av7110/video-fclose.rst delete mode 100644 drivers/staging/media/deprecated/saa7146/av7110/video-fopen.rst delete mode 100644 drivers/staging/media/deprecated/saa7146/av7110/video-freeze.rst delete mode 100644 drivers/staging/media/deprecated/saa7146/av7110/video-fwrite.rst delete mode 100644 drivers/staging/media/deprecated/saa7146/av7110/video-get-capabilities.rst delete mode 100644 drivers/staging/media/deprecated/saa7146/av7110/video-get-event.rst delete mode 100644 drivers/staging/media/deprecated/saa7146/av7110/video-get-frame-count.rst delete mode 100644 drivers/staging/media/deprecated/saa7146/av7110/video-get-pts.rst delete mode 100644 drivers/staging/media/deprecated/saa7146/av7110/video-get-size.rst delete mode 100644 drivers/staging/media/deprecated/saa7146/av7110/video-get-status.rst delete mode 100644 drivers/staging/media/deprecated/saa7146/av7110/video-play.rst delete mode 100644 drivers/staging/media/deprecated/saa7146/av7110/video-select-source.rst delete mode 100644 drivers/staging/media/deprecated/saa7146/av7110/video-set-blank.rst delete mode 100644 drivers/staging/media/deprecated/saa7146/av7110/video-set-display-format.rst delete mode 100644 drivers/staging/media/deprecated/saa7146/av7110/video-set-format.rst delete mode 100644 drivers/staging/media/deprecated/saa7146/av7110/video-set-streamtype.rst delete mode 100644 drivers/staging/media/deprecated/saa7146/av7110/video-slowmotion.rst delete mode 100644 drivers/staging/media/deprecated/saa7146/av7110/video-stillpicture.rst delete mode 100644 drivers/staging/media/deprecated/saa7146/av7110/video-stop.rst delete mode 100644 drivers/staging/media/deprecated/saa7146/av7110/video-try-command.rst delete mode 100644 drivers/staging/media/deprecated/saa7146/av7110/video.rst delete mode 100644 drivers/staging/media/deprecated/saa7146/av7110/video_function_calls.rst delete mode 100644 drivers/staging/media/deprecated/saa7146/av7110/video_types.rst