diff mbox series

[v5,2/3] thermal/drivers/intel: Use generic trip points for intel_pch

Message ID 20230113180235.1604526-3-daniel.lezcano@linaro.org
State Superseded
Headers show
Series Thermal ACPI APIs for generic trip points | expand

Commit Message

Daniel Lezcano Jan. 13, 2023, 6:02 p.m. UTC
The thermal framework gives the possibility to register the trip
points with the thermal zone. When that is done, no get_trip_* ops are
needed and they can be removed.

Convert the ops content logic into generic trip points and register
them with the thermal zone.

In order to consolidate the code, use the ACPI thermal framework API
to fill the generic trip point from the ACPI tables.

It has been tested on a Intel i7-8650U - x280 with the INT3400, the
PCH, ACPITZ, and x86_pkg_temp. No regression observed so far.

Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
---
 drivers/thermal/intel/Kconfig             |  1 +
 drivers/thermal/intel/intel_pch_thermal.c | 88 +++++------------------
 2 files changed, 20 insertions(+), 69 deletions(-)
diff mbox series

Patch

diff --git a/drivers/thermal/intel/Kconfig b/drivers/thermal/intel/Kconfig
index f0c845679250..7d68c076c23d 100644
--- a/drivers/thermal/intel/Kconfig
+++ b/drivers/thermal/intel/Kconfig
@@ -75,6 +75,7 @@  config INTEL_BXT_PMIC_THERMAL
 config INTEL_PCH_THERMAL
 	tristate "Intel PCH Thermal Reporting Driver"
 	depends on X86 && PCI
+	select THERMAL_ACPI if ACPI
 	help
 	  Enable this to support thermal reporting on certain intel PCHs.
 	  Thermal reporting device will provide temperature reading,
diff --git a/drivers/thermal/intel/intel_pch_thermal.c b/drivers/thermal/intel/intel_pch_thermal.c
index dabf11a687a1..8d3aaa467468 100644
--- a/drivers/thermal/intel/intel_pch_thermal.c
+++ b/drivers/thermal/intel/intel_pch_thermal.c
@@ -65,6 +65,8 @@ 
 #define WPT_TEMP_OFFSET	(PCH_TEMP_OFFSET * MILLIDEGREE_PER_DEGREE)
 #define GET_PCH_TEMP(x)	(((x) / 2) + PCH_TEMP_OFFSET)
 
+#define PCH_MAX_TRIPS 3 /* critical, hot, passive */
+
 /* Amount of time for each cooling delay, 100ms by default for now */
 static unsigned int delay_timeout = 100;
 module_param(delay_timeout, int, 0644);
@@ -82,12 +84,7 @@  struct pch_thermal_device {
 	const struct pch_dev_ops *ops;
 	struct pci_dev *pdev;
 	struct thermal_zone_device *tzd;
-	int crt_trip_id;
-	unsigned long crt_temp;
-	int hot_trip_id;
-	unsigned long hot_temp;
-	int psv_trip_id;
-	unsigned long psv_temp;
+	struct thermal_trip trips[PCH_MAX_TRIPS];
 	bool bios_enabled;
 };
 
@@ -102,33 +99,22 @@  static void pch_wpt_add_acpi_psv_trip(struct pch_thermal_device *ptd,
 				      int *nr_trips)
 {
 	struct acpi_device *adev;
-
-	ptd->psv_trip_id = -1;
+	int ret;
 
 	adev = ACPI_COMPANION(&ptd->pdev->dev);
-	if (adev) {
-		unsigned long long r;
-		acpi_status status;
-
-		status = acpi_evaluate_integer(adev->handle, "_PSV", NULL,
-					       &r);
-		if (ACPI_SUCCESS(status)) {
-			unsigned long trip_temp;
-
-			trip_temp = deci_kelvin_to_millicelsius(r);
-			if (trip_temp) {
-				ptd->psv_temp = trip_temp;
-				ptd->psv_trip_id = *nr_trips;
-				++(*nr_trips);
-			}
-		}
-	}
+	if (!adev)
+		return;
+
+	ret = thermal_acpi_trip_psv(adev, &ptd->trips[*nr_trips]);
+	if (ret)
+		return;
+
+	++(*nr_trips);
 }
 #else
 static void pch_wpt_add_acpi_psv_trip(struct pch_thermal_device *ptd,
 				      int *nr_trips)
 {
-	ptd->psv_trip_id = -1;
 
 }
 #endif
@@ -163,21 +149,19 @@  static int pch_wpt_init(struct pch_thermal_device *ptd, int *nr_trips)
 	}
 
 read_trips:
-	ptd->crt_trip_id = -1;
 	trip_temp = readw(ptd->hw_base + WPT_CTT);
 	trip_temp &= 0x1FF;
 	if (trip_temp) {
-		ptd->crt_temp = GET_WPT_TEMP(trip_temp);
-		ptd->crt_trip_id = 0;
+		ptd->trips[*nr_trips].temperature = GET_WPT_TEMP(trip_temp);
+		ptd->trips[*nr_trips].type = THERMAL_TRIP_CRITICAL;
 		++(*nr_trips);
 	}
 
-	ptd->hot_trip_id = -1;
 	trip_temp = readw(ptd->hw_base + WPT_PHL);
 	trip_temp &= 0x1FF;
 	if (trip_temp) {
-		ptd->hot_temp = GET_WPT_TEMP(trip_temp);
-		ptd->hot_trip_id = *nr_trips;
+		ptd->trips[*nr_trips].temperature = GET_WPT_TEMP(trip_temp);
+		ptd->trips[*nr_trips].type = THERMAL_TRIP_HOT;
 		++(*nr_trips);
 	}
 
@@ -298,39 +282,6 @@  static int pch_thermal_get_temp(struct thermal_zone_device *tzd, int *temp)
 	return	ptd->ops->get_temp(ptd, temp);
 }
 
-static int pch_get_trip_type(struct thermal_zone_device *tzd, int trip,
-			     enum thermal_trip_type *type)
-{
-	struct pch_thermal_device *ptd = tzd->devdata;
-
-	if (ptd->crt_trip_id == trip)
-		*type = THERMAL_TRIP_CRITICAL;
-	else if (ptd->hot_trip_id == trip)
-		*type = THERMAL_TRIP_HOT;
-	else if (ptd->psv_trip_id == trip)
-		*type = THERMAL_TRIP_PASSIVE;
-	else
-		return -EINVAL;
-
-	return 0;
-}
-
-static int pch_get_trip_temp(struct thermal_zone_device *tzd, int trip, int *temp)
-{
-	struct pch_thermal_device *ptd = tzd->devdata;
-
-	if (ptd->crt_trip_id == trip)
-		*temp = ptd->crt_temp;
-	else if (ptd->hot_trip_id == trip)
-		*temp = ptd->hot_temp;
-	else if (ptd->psv_trip_id == trip)
-		*temp = ptd->psv_temp;
-	else
-		return -EINVAL;
-
-	return 0;
-}
-
 static void pch_critical(struct thermal_zone_device *tzd)
 {
 	dev_dbg(&tzd->device, "%s: critical temperature reached\n", tzd->type);
@@ -338,8 +289,6 @@  static void pch_critical(struct thermal_zone_device *tzd)
 
 static struct thermal_zone_device_ops tzd_ops = {
 	.get_temp = pch_thermal_get_temp,
-	.get_trip_type = pch_get_trip_type,
-	.get_trip_temp = pch_get_trip_temp,
 	.critical = pch_critical,
 };
 
@@ -423,8 +372,9 @@  static int intel_pch_thermal_probe(struct pci_dev *pdev,
 	if (err)
 		goto error_cleanup;
 
-	ptd->tzd = thermal_zone_device_register(bi->name, nr_trips, 0, ptd,
-						&tzd_ops, NULL, 0, 0);
+	ptd->tzd = thermal_zone_device_register_with_trips(bi->name, ptd->trips,
+							   nr_trips, 0, ptd,
+							   &tzd_ops, NULL, 0, 0);
 	if (IS_ERR(ptd->tzd)) {
 		dev_err(&pdev->dev, "Failed to register thermal zone %s\n",
 			bi->name);