diff mbox

[06/12] ARM: dts: dragonboard-600c: Add eMMC and SD card support

Message ID 1458762458-9584-1-git-send-email-srinivas.kandagatla@linaro.org
State New
Headers show

Commit Message

Srinivas Kandagatla March 23, 2016, 7:47 p.m. UTC 
This patch adds eMMC and SD card support with card detect and adding
required regulators.

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>

---
 .../arm/boot/dts/qcom-apq8064-dragonboard-600c.dts | 41 ++++++++++++++++++++++
 1 file changed, 41 insertions(+)

-- 
2.5.0
diff mbox

Patch

diff --git a/arch/arm/boot/dts/qcom-apq8064-dragonboard-600c.dts b/arch/arm/boot/dts/qcom-apq8064-dragonboard-600c.dts
index 0a0bcfe..a977314 100644
--- a/arch/arm/boot/dts/qcom-apq8064-dragonboard-600c.dts
+++ b/arch/arm/boot/dts/qcom-apq8064-dragonboard-600c.dts
@@ -1,4 +1,5 @@ 
 #include "qcom-apq8064-v2.0.dtsi"
+#include <dt-bindings/gpio/gpio.h>
 
 / {
 	model = "Qualcomm Technologies, Inc. APQ8064 DragonBoard600c";
@@ -22,6 +23,16 @@ 
 	};
 
 	soc {
+		pinctrl@800000 {
+			card_detect: card_detect {
+				mux {
+					pins = "gpio26";
+					function = "gpio";
+					bias-disable;
+				};
+			};
+		};
+
 		rpm@108000 {
 			regulators {
 				vdd_l1_l2_l12_l18-supply = <&pm8921_s4>;
@@ -62,6 +73,18 @@ 
 					regulator-max-microvolt = <1300000>;
 					qcom,switch-mode-frequency = <3200000>;
 				 };
+
+				l5 {
+					regulator-min-microvolt = <2750000>;
+					regulator-max-microvolt = <3000000>;
+					bias-pull-down;
+				};
+
+				l6 {
+					regulator-min-microvolt = <2950000>;
+					regulator-max-microvolt = <2950000>;
+					bias-pull-down;
+				};
 			};
 		};
 
@@ -87,5 +110,23 @@ 
 				pinctrl-0 = <&gsbi7_uart_2pins>;
 			};
 		};
+
+		amba {
+			/* eMMC */
+			sdcc@12400000 {
+				status = "okay";
+				vmmc-supply = <&pm8921_l5>;
+				vqmmc-supply = <&pm8921_s4>;
+			};
+
+			/* External micro SD card */
+			sdcc@12180000 {
+				status = "okay";
+				vmmc-supply = <&pm8921_l6>;
+				pinctrl-names	= "default";
+				pinctrl-0	= <&card_detect>;
+				cd-gpios	= <&tlmm_pinmux 26 GPIO_ACTIVE_HIGH>;
+			};
+		};
 	};
 };