new file mode 100644
@@ -0,0 +1,77 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2023, Linaro Limited
+ */
+
+#ifndef QCOM_PHY_QMP_QSERDES_TXRX_USB_V6_H_
+#define QCOM_PHY_QMP_QSERDES_TXRX_USB_V6_H_
+
+#define QSERDES_V6_TX_CLKBUF_ENABLE 0x08
+#define QSERDES_V6_TX_RESET_TSYNC_EN 0x1c
+#define QSERDES_V6_TX_PRE_STALL_LDO_BOOST_EN 0x20
+#define QSERDES_V6_TX_TX_BAND 0x24
+#define QSERDES_V6_TX_INTERFACE_SELECT 0x2c
+#define QSERDES_V6_TX_RES_CODE_LANE_TX 0x34
+#define QSERDES_V6_TX_RES_CODE_LANE_RX 0x38
+#define QSERDES_V6_TX_RES_CODE_LANE_OFFSET_TX 0x3c
+#define QSERDES_V6_TX_RES_CODE_LANE_OFFSET_RX 0x40
+#define QSERDES_V6_TX_PARRATE_REC_DETECT_IDLE_EN 0x60
+#define QSERDES_V6_TX_BIST_PATTERN7 0x7c
+#define QSERDES_V6_TX_LANE_MODE_1 0x84
+#define QSERDES_V6_TX_LANE_MODE_3 0x8c
+#define QSERDES_V6_TX_LANE_MODE_4 0x90
+#define QSERDES_V6_TX_LANE_MODE_5 0x94
+#define QSERDES_V6_TX_RCV_DETECT_LVL_2 0xa4
+#define QSERDES_V6_TX_TRAN_DRVR_EMP_EN 0xc0
+#define QSERDES_V6_TX_TX_INTERFACE_MODE 0xc4
+#define QSERDES_V6_TX_VMODE_CTRL1 0xc8
+#define QSERDES_V6_TX_PI_QEC_CTRL 0xe4
+
+#define QSERDES_V6_RX_UCDR_FO_GAIN 0x08
+#define QSERDES_V6_RX_UCDR_SO_GAIN 0x14
+#define QSERDES_V6_RX_UCDR_FASTLOCK_FO_GAIN 0x30
+#define QSERDES_V6_RX_UCDR_SO_SATURATION_AND_ENABLE 0x34
+#define QSERDES_V6_RX_UCDR_FASTLOCK_COUNT_LOW 0x3c
+#define QSERDES_V6_RX_UCDR_FASTLOCK_COUNT_HIGH 0x40
+#define QSERDES_V6_RX_UCDR_PI_CONTROLS 0x44
+#define QSERDES_V6_RX_UCDR_SB2_THRESH1 0x4c
+#define QSERDES_V6_RX_UCDR_SB2_THRESH2 0x50
+#define QSERDES_V6_RX_UCDR_SB2_GAIN1 0x54
+#define QSERDES_V6_RX_UCDR_SB2_GAIN2 0x58
+#define QSERDES_V6_RX_AUX_DATA_TCOARSE_TFINE 0x60
+#define QSERDES_V6_RX_TX_ADAPT_POST_THRESH 0xcc
+#define QSERDES_V6_RX_VGA_CAL_CNTRL1 0xd4
+#define QSERDES_V6_RX_VGA_CAL_CNTRL2 0xd8
+#define QSERDES_V6_RX_GM_CAL 0xdc
+#define QSERDES_V6_RX_RX_EQU_ADAPTOR_CNTRL2 0xec
+#define QSERDES_V6_RX_RX_EQU_ADAPTOR_CNTRL3 0xf0
+#define QSERDES_V6_RX_RX_EQU_ADAPTOR_CNTRL4 0xf4
+#define QSERDES_V6_RX_RX_IDAC_TSETTLE_LOW 0xf8
+#define QSERDES_V6_RX_RX_IDAC_TSETTLE_HIGH 0xfc
+#define QSERDES_V6_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1 0x110
+#define QSERDES_V6_RX_SIDGET_ENABLES 0x118
+#define QSERDES_V6_RX_SIGDET_CNTRL 0x11c
+#define QSERDES_V6_RX_SIGDET_DEGLITCH_CNTRL 0x124
+#define QSERDES_V6_RX_RX_MODE_00_LOW 0x15c
+#define QSERDES_V6_RX_RX_MODE_00_HIGH 0x160
+#define QSERDES_V6_RX_RX_MODE_00_HIGH2 0x164
+#define QSERDES_V6_RX_RX_MODE_00_HIGH3 0x168
+#define QSERDES_V6_RX_RX_MODE_00_HIGH4 0x16c
+#define QSERDES_V6_RX_RX_MODE_01_LOW 0x170
+#define QSERDES_V6_RX_RX_MODE_01_HIGH 0x174
+#define QSERDES_V6_RX_RX_MODE_01_HIGH2 0x178
+#define QSERDES_V6_RX_RX_MODE_01_HIGH3 0x17c
+#define QSERDES_V6_RX_RX_MODE_01_HIGH4 0x180
+#define QSERDES_V6_RX_RX_MODE_10_LOW 0x184
+#define QSERDES_V6_RX_RX_MODE_10_HIGH 0x188
+#define QSERDES_V6_RX_RX_MODE_10_HIGH2 0x18c
+#define QSERDES_V6_RX_RX_MODE_10_HIGH3 0x190
+#define QSERDES_V6_RX_RX_MODE_10_HIGH4 0x194
+#define QSERDES_V6_RX_DFE_EN_TIMER 0x1a0
+#define QSERDES_V6_RX_DFE_CTLE_POST_CAL_OFFSET 0x1a4
+#define QSERDES_V6_RX_DCC_CTRL1 0x1a8
+#define QSERDES_V6_RX_VTH_CODE 0x1b0
+#define QSERDES_V6_RX_SIGDET_CAL_CTRL1 0x1e4
+#define QSERDES_V6_RX_SIGDET_CAL_TRIM 0x1f8
+
+#endif
@@ -22,6 +22,7 @@
#include "phy-qcom-qmp-qserdes-txrx-v5_5nm.h"
#include "phy-qcom-qmp-qserdes-com-v6.h"
+#include "phy-qcom-qmp-qserdes-txrx-v6.h"
#include "phy-qcom-qmp-qserdes-pll.h"
The new SM8550 SoC bumps up the HW version of QMP phy to v6 for USB, UFS and PCIE g3x2. Add the new qserdes TX RX offsets in a dedicated header file. Signed-off-by: Abel Vesa <abel.vesa@linaro.org> --- .../qualcomm/phy-qcom-qmp-qserdes-txrx-v6.h | 77 +++++++++++++++++++ drivers/phy/qualcomm/phy-qcom-qmp.h | 1 + 2 files changed, 78 insertions(+) create mode 100644 drivers/phy/qualcomm/phy-qcom-qmp-qserdes-txrx-v6.h