@@ -871,9 +871,12 @@ static void dwc3_clk_disable(struct dwc3 *dwc)
static void dwc3_core_exit(struct dwc3 *dwc)
{
- int i;
+ int i;
+ unsigned int hw_mode;
- dwc3_event_buffers_cleanup(dwc);
+ hw_mode = DWC3_GHWPARAMS0_MODE(dwc->hwparams.hwparams0);
+ if (hw_mode != DWC3_GHWPARAMS0_MODE_HOST)
+ dwc3_event_buffers_cleanup(dwc);
usb_phy_set_suspend(dwc->usb2_phy, 1);
usb_phy_set_suspend(dwc->usb3_phy, 1);
@@ -1246,10 +1249,12 @@ static int dwc3_core_init(struct dwc3 *dwc)
}
}
- ret = dwc3_event_buffers_setup(dwc);
- if (ret) {
- dev_err(dwc->dev, "failed to setup event buffers\n");
- goto err4;
+ if (hw_mode != DWC3_GHWPARAMS0_MODE_HOST) {
+ ret = dwc3_event_buffers_setup(dwc);
+ if (ret) {
+ dev_err(dwc->dev, "failed to setup event buffers\n");
+ goto err4;
+ }
}
/*
@@ -1886,7 +1891,7 @@ static int dwc3_probe(struct platform_device *pdev)
struct resource *res, dwc_res;
struct dwc3 *dwc;
int ret, i;
-
+ unsigned int hw_mode;
void __iomem *regs;
dwc = devm_kzalloc(dev, sizeof(*dwc), GFP_KERNEL);
@@ -2063,7 +2068,9 @@ static int dwc3_probe(struct platform_device *pdev)
err5:
dwc3_debugfs_exit(dwc);
- dwc3_event_buffers_cleanup(dwc);
+ hw_mode = DWC3_GHWPARAMS0_MODE(dwc->hwparams.hwparams0);
+ if (hw_mode != DWC3_GHWPARAMS0_MODE_HOST)
+ dwc3_event_buffers_cleanup(dwc);
usb_phy_set_suspend(dwc->usb2_phy, 1);
usb_phy_set_suspend(dwc->usb3_phy, 1);
Multiport controllers being host-only capable do not have GEVNTADDR HI/LO, SIZE, COUNT reigsters present. Accsesing them to setup event buffers during core_init can cause an SMMU Fault. Avoid event buffers setup if the GHWPARAMS0 tells that the controller is host-only. Signed-off-by: Krishna Kurapati <quic_kriskura@quicinc.com> --- drivers/usb/dwc3/core.c | 23 +++++++++++++++-------- 1 file changed, 15 insertions(+), 8 deletions(-)