| Message ID | 20230123125612.154840-1-krzysztof.kozlowski@linaro.org |
|---|---|
| State | Superseded |
| Headers | show |
| Series | [v2,1/4] arm64: dts: qcom: use generic node name for Bluetooth | expand |
On 23.01.2023 13:56, Krzysztof Kozlowski wrote: > Node names should be generic (as Devicetree spec mandates), so use > "bluetooth" for BT node. > > Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> > > --- Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Konrad > > Changes since v1: > 1. Fix also msm8996-xiaomi-common > --- > arch/arm64/boot/dts/qcom/msm8996-xiaomi-common.dtsi | 2 +- > arch/arm64/boot/dts/qcom/sc7180-idp.dts | 2 +- > arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi | 2 +- > 3 files changed, 3 insertions(+), 3 deletions(-) > > diff --git a/arch/arm64/boot/dts/qcom/msm8996-xiaomi-common.dtsi b/arch/arm64/boot/dts/qcom/msm8996-xiaomi-common.dtsi > index 5b47b8de69da..2acfed28e3cb 100644 > --- a/arch/arm64/boot/dts/qcom/msm8996-xiaomi-common.dtsi > +++ b/arch/arm64/boot/dts/qcom/msm8996-xiaomi-common.dtsi > @@ -229,7 +229,7 @@ &blsp1_uart2 { > status = "okay"; > label = "QCA_UART"; > > - bluetooth: qca6174a { > + bluetooth: bluetooth { > compatible = "qcom,qca6174-bt"; > > enable-gpios = <&pm8994_gpios 19 GPIO_ACTIVE_HIGH>; > diff --git a/arch/arm64/boot/dts/qcom/sc7180-idp.dts b/arch/arm64/boot/dts/qcom/sc7180-idp.dts > index 774f9d45f051..6ea8dd7d3e01 100644 > --- a/arch/arm64/boot/dts/qcom/sc7180-idp.dts > +++ b/arch/arm64/boot/dts/qcom/sc7180-idp.dts > @@ -430,7 +430,7 @@ &uart3 { > pinctrl-names = "default", "sleep"; > pinctrl-1 = <&qup_uart3_sleep>; > > - bluetooth: wcn3990-bt { > + bluetooth: bluetooth { > compatible = "qcom,wcn3990-bt"; > vddio-supply = <&vreg_l10a_1p8>; > vddxo-supply = <&vreg_l1c_1p8>; > diff --git a/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi b/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi > index a78075155310..e19178c1ec44 100644 > --- a/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi > +++ b/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi > @@ -862,7 +862,7 @@ &uart6 { > > pinctrl-0 = <&qup_uart6_4pin>; > > - bluetooth: wcn3990-bt { > + bluetooth: bluetooth { > compatible = "qcom,wcn3990-bt"; > vddio-supply = <&src_pp1800_s4a>; > vddxo-supply = <&pp1800_l7a_wcn3990>;
diff --git a/arch/arm64/boot/dts/qcom/msm8996-xiaomi-common.dtsi b/arch/arm64/boot/dts/qcom/msm8996-xiaomi-common.dtsi index 5b47b8de69da..2acfed28e3cb 100644 --- a/arch/arm64/boot/dts/qcom/msm8996-xiaomi-common.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8996-xiaomi-common.dtsi @@ -229,7 +229,7 @@ &blsp1_uart2 { status = "okay"; label = "QCA_UART"; - bluetooth: qca6174a { + bluetooth: bluetooth { compatible = "qcom,qca6174-bt"; enable-gpios = <&pm8994_gpios 19 GPIO_ACTIVE_HIGH>; diff --git a/arch/arm64/boot/dts/qcom/sc7180-idp.dts b/arch/arm64/boot/dts/qcom/sc7180-idp.dts index 774f9d45f051..6ea8dd7d3e01 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-idp.dts +++ b/arch/arm64/boot/dts/qcom/sc7180-idp.dts @@ -430,7 +430,7 @@ &uart3 { pinctrl-names = "default", "sleep"; pinctrl-1 = <&qup_uart3_sleep>; - bluetooth: wcn3990-bt { + bluetooth: bluetooth { compatible = "qcom,wcn3990-bt"; vddio-supply = <&vreg_l10a_1p8>; vddxo-supply = <&vreg_l1c_1p8>; diff --git a/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi b/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi index a78075155310..e19178c1ec44 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi @@ -862,7 +862,7 @@ &uart6 { pinctrl-0 = <&qup_uart6_4pin>; - bluetooth: wcn3990-bt { + bluetooth: bluetooth { compatible = "qcom,wcn3990-bt"; vddio-supply = <&src_pp1800_s4a>; vddxo-supply = <&pp1800_l7a_wcn3990>;
Node names should be generic (as Devicetree spec mandates), so use "bluetooth" for BT node. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> --- Changes since v1: 1. Fix also msm8996-xiaomi-common --- arch/arm64/boot/dts/qcom/msm8996-xiaomi-common.dtsi | 2 +- arch/arm64/boot/dts/qcom/sc7180-idp.dts | 2 +- arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi | 2 +- 3 files changed, 3 insertions(+), 3 deletions(-)