diff mbox series

[RFC,v2,20/22] sound: usb: Prevent starting of audio stream if in use

Message ID 20230126031424.14582-21-quic_wcheng@quicinc.com
State Superseded
Headers show
Series Introduce QC USB SND audio offloading support | expand

Commit Message

Wesley Cheng Jan. 26, 2023, 3:14 a.m. UTC
With USB audio offloading, an audio session is started from the ASoC
platform sound card and PCM devices.  Likewise, the USB SND path is still
readily available for use, in case the non-offload path is desired.  In
order to prevent the two entities from attempting to use the USB bus,
introduce a flag that determines when either paths are in use.

If a PCM device is already in use, the check will return an error to
userspace notifying that the stream is currently busy.  This ensures that
only one path is using the USB substream.

Signed-off-by: Wesley Cheng <quic_wcheng@quicinc.com>
---
 sound/usb/card.h                  |  1 +
 sound/usb/pcm.c                   | 19 +++++++++++++++++--
 sound/usb/qcom/qc_audio_offload.c | 15 ++++++++++++++-
 3 files changed, 32 insertions(+), 3 deletions(-)

Comments

Pierre-Louis Bossart Jan. 26, 2023, 4:12 p.m. UTC | #1
On 1/25/23 21:14, Wesley Cheng wrote:
> With USB audio offloading, an audio session is started from the ASoC
> platform sound card and PCM devices.  Likewise, the USB SND path is still
> readily available for use, in case the non-offload path is desired.  In
> order to prevent the two entities from attempting to use the USB bus,
> introduce a flag that determines when either paths are in use.
> 
> If a PCM device is already in use, the check will return an error to
> userspace notifying that the stream is currently busy.  This ensures that
> only one path is using the USB substream.

It's good to maintain mutual exclusion, but it's still very hard for an
application to figure out which card can be used when.

Returning -EBUSY is not super helpful. There should be something like a
notification or connection status so that routing decisions can be made
without trial-and-error.

> Signed-off-by: Wesley Cheng <quic_wcheng@quicinc.com>
> ---
>  sound/usb/card.h                  |  1 +
>  sound/usb/pcm.c                   | 19 +++++++++++++++++--
>  sound/usb/qcom/qc_audio_offload.c | 15 ++++++++++++++-
>  3 files changed, 32 insertions(+), 3 deletions(-)
> 
> diff --git a/sound/usb/card.h b/sound/usb/card.h
> index 410a4ffad98e..ff6d4695e727 100644
> --- a/sound/usb/card.h
> +++ b/sound/usb/card.h
> @@ -163,6 +163,7 @@ struct snd_usb_substream {
>  	unsigned int pkt_offset_adj;	/* Bytes to drop from beginning of packets (for non-compliant devices) */
>  	unsigned int stream_offset_adj;	/* Bytes to drop from beginning of stream (for non-compliant devices) */
>  
> +	unsigned int opened:1;		/* pcm device opened */
>  	unsigned int running: 1;	/* running status */
>  	unsigned int period_elapsed_pending;	/* delay period handling */
>  
> diff --git a/sound/usb/pcm.c b/sound/usb/pcm.c
> index 0b01a5dfcb73..8946f8ddb892 100644
> --- a/sound/usb/pcm.c
> +++ b/sound/usb/pcm.c
> @@ -1114,8 +1114,15 @@ static int snd_usb_pcm_open(struct snd_pcm_substream *substream)
>  	struct snd_usb_stream *as = snd_pcm_substream_chip(substream);
>  	struct snd_pcm_runtime *runtime = substream->runtime;
>  	struct snd_usb_substream *subs = &as->substream[direction];
> +	struct snd_usb_audio *chip = subs->stream->chip;
>  	int ret;
>  
> +	mutex_lock(&chip->mutex);
> +	if (subs->opened) {
> +		mutex_unlock(&chip->mutex);
> +		return -EBUSY;
> +	}
> +
>  	runtime->hw = snd_usb_hardware;
>  	/* need an explicit sync to catch applptr update in low-latency mode */
>  	if (direction == SNDRV_PCM_STREAM_PLAYBACK &&
> @@ -1132,13 +1139,17 @@ static int snd_usb_pcm_open(struct snd_pcm_substream *substream)
>  
>  	ret = setup_hw_info(runtime, subs);
>  	if (ret < 0)
> -		return ret;
> +		goto out;
>  	ret = snd_usb_autoresume(subs->stream->chip);
>  	if (ret < 0)
> -		return ret;
> +		goto out;
>  	ret = snd_media_stream_init(subs, as->pcm, direction);
>  	if (ret < 0)
>  		snd_usb_autosuspend(subs->stream->chip);
> +	subs->opened = 1;
> +out:
> +	mutex_unlock(&chip->mutex);
> +
>  	return ret;
>  }
>  
> @@ -1147,6 +1158,7 @@ static int snd_usb_pcm_close(struct snd_pcm_substream *substream)
>  	int direction = substream->stream;
>  	struct snd_usb_stream *as = snd_pcm_substream_chip(substream);
>  	struct snd_usb_substream *subs = &as->substream[direction];
> +	struct snd_usb_audio *chip = subs->stream->chip;
>  	int ret;
>  
>  	snd_media_stop_pipeline(subs);
> @@ -1160,6 +1172,9 @@ static int snd_usb_pcm_close(struct snd_pcm_substream *substream)
>  
>  	subs->pcm_substream = NULL;
>  	snd_usb_autosuspend(subs->stream->chip);
> +	mutex_lock(&chip->mutex);
> +	subs->opened = 0;
> +	mutex_unlock(&chip->mutex);
>  
>  	return 0;
>  }
> diff --git a/sound/usb/qcom/qc_audio_offload.c b/sound/usb/qcom/qc_audio_offload.c
> index c1254d5f680d..9bd09282e70d 100644
> --- a/sound/usb/qcom/qc_audio_offload.c
> +++ b/sound/usb/qcom/qc_audio_offload.c
> @@ -1365,12 +1365,17 @@ static void handle_uaudio_stream_req(struct qmi_handle *handle,
>  		goto response;
>  	}
>  
> +	mutex_lock(&chip->mutex);
>  	if (req_msg->enable) {
> -		if (info_idx < 0 || chip->system_suspend) {
> +		if (info_idx < 0 || chip->system_suspend || subs->opened) {
>  			ret = -EBUSY;
> +			mutex_unlock(&chip->mutex);
> +
>  			goto response;
>  		}
> +		subs->opened = 1;
>  	}
> +	mutex_unlock(&chip->mutex);
>  
>  	if (req_msg->service_interval_valid) {
>  		ret = get_data_interval_from_si(subs,
> @@ -1392,6 +1397,11 @@ static void handle_uaudio_stream_req(struct qmi_handle *handle,
>  		if (!ret)
>  			ret = prepare_qmi_response(subs, req_msg, &resp,
>  					info_idx);
> +		if (ret < 0) {
> +			mutex_lock(&chip->mutex);
> +			subs->opened = 0;
> +			mutex_unlock(&chip->mutex);
> +		}
>  	} else {
>  		info = &uadev[pcm_card_num].info[info_idx];
>  		if (info->data_ep_pipe) {
> @@ -1413,6 +1423,9 @@ static void handle_uaudio_stream_req(struct qmi_handle *handle,
>  		}
>  
>  		disable_audio_stream(subs);
> +		mutex_lock(&chip->mutex);
> +		subs->opened = 0;
> +		mutex_unlock(&chip->mutex);
>  	}
>  
>  response:
Wesley Cheng Feb. 7, 2023, 1:15 a.m. UTC | #2
Hi Pierre,

On 1/26/2023 8:12 AM, Pierre-Louis Bossart wrote:
> 
> 
> On 1/25/23 21:14, Wesley Cheng wrote:
>> With USB audio offloading, an audio session is started from the ASoC
>> platform sound card and PCM devices.  Likewise, the USB SND path is still
>> readily available for use, in case the non-offload path is desired.  In
>> order to prevent the two entities from attempting to use the USB bus,
>> introduce a flag that determines when either paths are in use.
>>
>> If a PCM device is already in use, the check will return an error to
>> userspace notifying that the stream is currently busy.  This ensures that
>> only one path is using the USB substream.
> 
> It's good to maintain mutual exclusion, but it's still very hard for an
> application to figure out which card can be used when.
> 
> Returning -EBUSY is not super helpful. There should be something like a
> notification or connection status so that routing decisions can be made
> without trial-and-error.
> 

The USB offload driver does have access to the USB substream that is 
being utilized/offloaded.  Maybe in addition to this check, we can also 
set the PCM runtime state as well (for that particular substream)?  That 
way userspace can fetch information about if the stream is busy or not.

Thanks
Wesley Cheng
Pierre-Louis Bossart Feb. 7, 2023, 1:29 p.m. UTC | #3
On 2/6/23 19:15, Wesley Cheng wrote:
> Hi Pierre,
> 
> On 1/26/2023 8:12 AM, Pierre-Louis Bossart wrote:
>>
>>
>> On 1/25/23 21:14, Wesley Cheng wrote:
>>> With USB audio offloading, an audio session is started from the ASoC
>>> platform sound card and PCM devices.  Likewise, the USB SND path is
>>> still
>>> readily available for use, in case the non-offload path is desired.  In
>>> order to prevent the two entities from attempting to use the USB bus,
>>> introduce a flag that determines when either paths are in use.
>>>
>>> If a PCM device is already in use, the check will return an error to
>>> userspace notifying that the stream is currently busy.  This ensures
>>> that
>>> only one path is using the USB substream.
>>
>> It's good to maintain mutual exclusion, but it's still very hard for an
>> application to figure out which card can be used when.
>>
>> Returning -EBUSY is not super helpful. There should be something like a
>> notification or connection status so that routing decisions can be made
>> without trial-and-error.
>>
> 
> The USB offload driver does have access to the USB substream that is
> being utilized/offloaded.  Maybe in addition to this check, we can also
> set the PCM runtime state as well (for that particular substream)?  That
> way userspace can fetch information about if the stream is busy or not.

You're missing the point. When a card is exposed but the PCM devices may
or may not be usable (consuming data with no sound rendered or returning
an error), it's much better to provide a clear connection status to
userspace.

Let me give you an example. Intel drivers can expose 3 HDMI/DP PCM
devices. Userspace has no idea which one to use, so there's a jack
control that tells userspace whether there is a receiver connected so
that the audio server can use the relevant PCM device.

Audio routing based on trial and error is really problematic, errors can
happen but they should be exceptional (e.g. xruns), not a means of
driver-userspace communication on the device status.
Wesley Cheng Feb. 11, 2023, 9:52 a.m. UTC | #4
Hi Pierre,

On 2/7/2023 5:29 AM, Pierre-Louis Bossart wrote:
> 
> 
> On 2/6/23 19:15, Wesley Cheng wrote:
>> Hi Pierre,
>>
>> On 1/26/2023 8:12 AM, Pierre-Louis Bossart wrote:
>>>
>>>
>>> On 1/25/23 21:14, Wesley Cheng wrote:
>>>> With USB audio offloading, an audio session is started from the ASoC
>>>> platform sound card and PCM devices.  Likewise, the USB SND path is
>>>> still
>>>> readily available for use, in case the non-offload path is desired.  In
>>>> order to prevent the two entities from attempting to use the USB bus,
>>>> introduce a flag that determines when either paths are in use.
>>>>
>>>> If a PCM device is already in use, the check will return an error to
>>>> userspace notifying that the stream is currently busy.  This ensures
>>>> that
>>>> only one path is using the USB substream.
>>>
>>> It's good to maintain mutual exclusion, but it's still very hard for an
>>> application to figure out which card can be used when.
>>>
>>> Returning -EBUSY is not super helpful. There should be something like a
>>> notification or connection status so that routing decisions can be made
>>> without trial-and-error.
>>>
>>
>> The USB offload driver does have access to the USB substream that is
>> being utilized/offloaded.  Maybe in addition to this check, we can also
>> set the PCM runtime state as well (for that particular substream)?  That
>> way userspace can fetch information about if the stream is busy or not.
> 
> You're missing the point. When a card is exposed but the PCM devices may
> or may not be usable (consuming data with no sound rendered or returning
> an error), it's much better to provide a clear connection status to
> userspace.
> 
> Let me give you an example. Intel drivers can expose 3 HDMI/DP PCM
> devices. Userspace has no idea which one to use, so there's a jack
> control that tells userspace whether there is a receiver connected so
> that the audio server can use the relevant PCM device.
> 
> Audio routing based on trial and error is really problematic, errors can
> happen but they should be exceptional (e.g. xruns), not a means of
> driver-userspace communication on the device status.

Thanks for clarifying.  The example helped me understand a bit more on 
how the potential use of the SND control interface.  Since we're dealing 
with multiple sound cards here (platform sound card (offload) and USB 
SND card (legacy)), what do you think about creating a SND control on 
both the USB backend (platform card) and the USB SND card listing the 
PCM device status?

That way at least userspace can have the information about which PCM dev 
(USB substream) is available (and not offloaded, or vice versa).  So the 
USB SND control will contain the PCM devices (exposed by the card) and 
if any are offloaded (if so mark them as unavailable).  Likewise, for 
the USB backend, if the legacy path is being used, mark them as 
unavailable for offloading.

Thanks
Wesley Cheng
Pierre-Louis Bossart Feb. 13, 2023, 3:22 p.m. UTC | #5
On 2/11/23 03:52, Wesley Cheng wrote:
> Hi Pierre,
> 
> On 2/7/2023 5:29 AM, Pierre-Louis Bossart wrote:
>>
>>
>> On 2/6/23 19:15, Wesley Cheng wrote:
>>> Hi Pierre,
>>>
>>> On 1/26/2023 8:12 AM, Pierre-Louis Bossart wrote:
>>>>
>>>>
>>>> On 1/25/23 21:14, Wesley Cheng wrote:
>>>>> With USB audio offloading, an audio session is started from the ASoC
>>>>> platform sound card and PCM devices.  Likewise, the USB SND path is
>>>>> still
>>>>> readily available for use, in case the non-offload path is
>>>>> desired.  In
>>>>> order to prevent the two entities from attempting to use the USB bus,
>>>>> introduce a flag that determines when either paths are in use.
>>>>>
>>>>> If a PCM device is already in use, the check will return an error to
>>>>> userspace notifying that the stream is currently busy.  This ensures
>>>>> that
>>>>> only one path is using the USB substream.
>>>>
>>>> It's good to maintain mutual exclusion, but it's still very hard for an
>>>> application to figure out which card can be used when.
>>>>
>>>> Returning -EBUSY is not super helpful. There should be something like a
>>>> notification or connection status so that routing decisions can be made
>>>> without trial-and-error.
>>>>
>>>
>>> The USB offload driver does have access to the USB substream that is
>>> being utilized/offloaded.  Maybe in addition to this check, we can also
>>> set the PCM runtime state as well (for that particular substream)?  That
>>> way userspace can fetch information about if the stream is busy or not.
>>
>> You're missing the point. When a card is exposed but the PCM devices may
>> or may not be usable (consuming data with no sound rendered or returning
>> an error), it's much better to provide a clear connection status to
>> userspace.
>>
>> Let me give you an example. Intel drivers can expose 3 HDMI/DP PCM
>> devices. Userspace has no idea which one to use, so there's a jack
>> control that tells userspace whether there is a receiver connected so
>> that the audio server can use the relevant PCM device.
>>
>> Audio routing based on trial and error is really problematic, errors can
>> happen but they should be exceptional (e.g. xruns), not a means of
>> driver-userspace communication on the device status.
> 
> Thanks for clarifying.  The example helped me understand a bit more on
> how the potential use of the SND control interface.  Since we're dealing
> with multiple sound cards here (platform sound card (offload) and USB
> SND card (legacy)), what do you think about creating a SND control on
> both the USB backend (platform card) and the USB SND card listing the
> PCM device status?
> 
> That way at least userspace can have the information about which PCM dev
> (USB substream) is available (and not offloaded, or vice versa).  So the
> USB SND control will contain the PCM devices (exposed by the card) and
> if any are offloaded (if so mark them as unavailable).  Likewise, for
> the USB backend, if the legacy path is being used, mark them as
> unavailable for offloading.

We definitively need a control to indicate that a PCM offload device is
available or not.
There's still a very large open with the notion of having separate cards
for the same audio device. Not only would it duplicate the control parts
for e.g. volume control, but it would introduce the need to tag devices
across two cards are being the same physical device.
I still think the least-bad option is to have a single card and an
optional PCM device for offload.
Wesley Cheng Feb. 13, 2023, 8:12 p.m. UTC | #6
Hi Pierre,

On 2/13/2023 7:22 AM, Pierre-Louis Bossart wrote:
> 
> 
> On 2/11/23 03:52, Wesley Cheng wrote:
>> Hi Pierre,
>>
>> On 2/7/2023 5:29 AM, Pierre-Louis Bossart wrote:
>>>
>>>
>>> On 2/6/23 19:15, Wesley Cheng wrote:
>>>> Hi Pierre,
>>>>
>>>> On 1/26/2023 8:12 AM, Pierre-Louis Bossart wrote:
>>>>>
>>>>>
>>>>> On 1/25/23 21:14, Wesley Cheng wrote:
>>>>>> With USB audio offloading, an audio session is started from the ASoC
>>>>>> platform sound card and PCM devices.  Likewise, the USB SND path is
>>>>>> still
>>>>>> readily available for use, in case the non-offload path is
>>>>>> desired.  In
>>>>>> order to prevent the two entities from attempting to use the USB bus,
>>>>>> introduce a flag that determines when either paths are in use.
>>>>>>
>>>>>> If a PCM device is already in use, the check will return an error to
>>>>>> userspace notifying that the stream is currently busy.  This ensures
>>>>>> that
>>>>>> only one path is using the USB substream.
>>>>>
>>>>> It's good to maintain mutual exclusion, but it's still very hard for an
>>>>> application to figure out which card can be used when.
>>>>>
>>>>> Returning -EBUSY is not super helpful. There should be something like a
>>>>> notification or connection status so that routing decisions can be made
>>>>> without trial-and-error.
>>>>>
>>>>
>>>> The USB offload driver does have access to the USB substream that is
>>>> being utilized/offloaded.  Maybe in addition to this check, we can also
>>>> set the PCM runtime state as well (for that particular substream)?  That
>>>> way userspace can fetch information about if the stream is busy or not.
>>>
>>> You're missing the point. When a card is exposed but the PCM devices may
>>> or may not be usable (consuming data with no sound rendered or returning
>>> an error), it's much better to provide a clear connection status to
>>> userspace.
>>>
>>> Let me give you an example. Intel drivers can expose 3 HDMI/DP PCM
>>> devices. Userspace has no idea which one to use, so there's a jack
>>> control that tells userspace whether there is a receiver connected so
>>> that the audio server can use the relevant PCM device.
>>>
>>> Audio routing based on trial and error is really problematic, errors can
>>> happen but they should be exceptional (e.g. xruns), not a means of
>>> driver-userspace communication on the device status.
>>
>> Thanks for clarifying.  The example helped me understand a bit more on
>> how the potential use of the SND control interface.  Since we're dealing
>> with multiple sound cards here (platform sound card (offload) and USB
>> SND card (legacy)), what do you think about creating a SND control on
>> both the USB backend (platform card) and the USB SND card listing the
>> PCM device status?
>>
>> That way at least userspace can have the information about which PCM dev
>> (USB substream) is available (and not offloaded, or vice versa).  So the
>> USB SND control will contain the PCM devices (exposed by the card) and
>> if any are offloaded (if so mark them as unavailable).  Likewise, for
>> the USB backend, if the legacy path is being used, mark them as
>> unavailable for offloading.
> 
> We definitively need a control to indicate that a PCM offload device is
> available or not.
> There's still a very large open with the notion of having separate cards
> for the same audio device. Not only would it duplicate the control parts
> for e.g. volume control, but it would introduce the need to tag devices
> across two cards are being the same physical device.

The volume control would still be done through the card that is exposed 
by the USB SND card (even for the offload path)[no vol control option 
for the USB device on the platform card].

In the last discussion, you did mention that maybe we can tag the 
offload path as the "power saving" option for a particular USB stream. 
Although I'm not sure how intricate the logic is, but if userspace marks 
to use the power saving path, then would it already know which card and 
PCM devices are involved?

Although, that part is missing, ie to select the card and pcm device 
that we want to offload.  It may be possible to do this with another 
control on the USB ASoC backend driver.  I believe the audio DSP can 
support device selection.

> I still think the least-bad option is to have a single card and an
> optional PCM device for offload.

This is most likely the end goal, but as mentioned previously, its going 
to be a large effort to slowly decouple some of the PCM related 
operations from USB SND.  IMO, that would most likely be another 
significant patch series in itself.

Thanks
Wesley Cheng
diff mbox series

Patch

diff --git a/sound/usb/card.h b/sound/usb/card.h
index 410a4ffad98e..ff6d4695e727 100644
--- a/sound/usb/card.h
+++ b/sound/usb/card.h
@@ -163,6 +163,7 @@  struct snd_usb_substream {
 	unsigned int pkt_offset_adj;	/* Bytes to drop from beginning of packets (for non-compliant devices) */
 	unsigned int stream_offset_adj;	/* Bytes to drop from beginning of stream (for non-compliant devices) */
 
+	unsigned int opened:1;		/* pcm device opened */
 	unsigned int running: 1;	/* running status */
 	unsigned int period_elapsed_pending;	/* delay period handling */
 
diff --git a/sound/usb/pcm.c b/sound/usb/pcm.c
index 0b01a5dfcb73..8946f8ddb892 100644
--- a/sound/usb/pcm.c
+++ b/sound/usb/pcm.c
@@ -1114,8 +1114,15 @@  static int snd_usb_pcm_open(struct snd_pcm_substream *substream)
 	struct snd_usb_stream *as = snd_pcm_substream_chip(substream);
 	struct snd_pcm_runtime *runtime = substream->runtime;
 	struct snd_usb_substream *subs = &as->substream[direction];
+	struct snd_usb_audio *chip = subs->stream->chip;
 	int ret;
 
+	mutex_lock(&chip->mutex);
+	if (subs->opened) {
+		mutex_unlock(&chip->mutex);
+		return -EBUSY;
+	}
+
 	runtime->hw = snd_usb_hardware;
 	/* need an explicit sync to catch applptr update in low-latency mode */
 	if (direction == SNDRV_PCM_STREAM_PLAYBACK &&
@@ -1132,13 +1139,17 @@  static int snd_usb_pcm_open(struct snd_pcm_substream *substream)
 
 	ret = setup_hw_info(runtime, subs);
 	if (ret < 0)
-		return ret;
+		goto out;
 	ret = snd_usb_autoresume(subs->stream->chip);
 	if (ret < 0)
-		return ret;
+		goto out;
 	ret = snd_media_stream_init(subs, as->pcm, direction);
 	if (ret < 0)
 		snd_usb_autosuspend(subs->stream->chip);
+	subs->opened = 1;
+out:
+	mutex_unlock(&chip->mutex);
+
 	return ret;
 }
 
@@ -1147,6 +1158,7 @@  static int snd_usb_pcm_close(struct snd_pcm_substream *substream)
 	int direction = substream->stream;
 	struct snd_usb_stream *as = snd_pcm_substream_chip(substream);
 	struct snd_usb_substream *subs = &as->substream[direction];
+	struct snd_usb_audio *chip = subs->stream->chip;
 	int ret;
 
 	snd_media_stop_pipeline(subs);
@@ -1160,6 +1172,9 @@  static int snd_usb_pcm_close(struct snd_pcm_substream *substream)
 
 	subs->pcm_substream = NULL;
 	snd_usb_autosuspend(subs->stream->chip);
+	mutex_lock(&chip->mutex);
+	subs->opened = 0;
+	mutex_unlock(&chip->mutex);
 
 	return 0;
 }
diff --git a/sound/usb/qcom/qc_audio_offload.c b/sound/usb/qcom/qc_audio_offload.c
index c1254d5f680d..9bd09282e70d 100644
--- a/sound/usb/qcom/qc_audio_offload.c
+++ b/sound/usb/qcom/qc_audio_offload.c
@@ -1365,12 +1365,17 @@  static void handle_uaudio_stream_req(struct qmi_handle *handle,
 		goto response;
 	}
 
+	mutex_lock(&chip->mutex);
 	if (req_msg->enable) {
-		if (info_idx < 0 || chip->system_suspend) {
+		if (info_idx < 0 || chip->system_suspend || subs->opened) {
 			ret = -EBUSY;
+			mutex_unlock(&chip->mutex);
+
 			goto response;
 		}
+		subs->opened = 1;
 	}
+	mutex_unlock(&chip->mutex);
 
 	if (req_msg->service_interval_valid) {
 		ret = get_data_interval_from_si(subs,
@@ -1392,6 +1397,11 @@  static void handle_uaudio_stream_req(struct qmi_handle *handle,
 		if (!ret)
 			ret = prepare_qmi_response(subs, req_msg, &resp,
 					info_idx);
+		if (ret < 0) {
+			mutex_lock(&chip->mutex);
+			subs->opened = 0;
+			mutex_unlock(&chip->mutex);
+		}
 	} else {
 		info = &uadev[pcm_card_num].info[info_idx];
 		if (info->data_ep_pipe) {
@@ -1413,6 +1423,9 @@  static void handle_uaudio_stream_req(struct qmi_handle *handle,
 		}
 
 		disable_audio_stream(subs);
+		mutex_lock(&chip->mutex);
+		subs->opened = 0;
+		mutex_unlock(&chip->mutex);
 	}
 
 response: