| Message ID | 20230123200552.553181-1-konrad.dybcio@linaro.org |
|---|---|
| State | Accepted |
| Commit | cce9c1d0b0168a08a3fe49bed6ac78731c69914c |
| Headers | show |
| Series | arm64: dts: qcom: sm8450: Fix DSIn PHY compatible | expand |
On 23/01/2023 21:05, Konrad Dybcio wrote: > Use the correct compatible so that the driver can probe properly. > > Fixes: a6dd1206e45a ("arm64: dts: qcom: sm8450: add display hardware devices") > Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> > --- > arch/arm64/boot/dts/qcom/sm8450.dtsi | 4 ++-- > 1 file changed, 2 insertions(+), 2 deletions(-) > > diff --git a/arch/arm64/boot/dts/qcom/sm8450.dtsi b/arch/arm64/boot/dts/qcom/sm8450.dtsi > index d66dcd8fe61f..8d85a3139849 100644 > --- a/arch/arm64/boot/dts/qcom/sm8450.dtsi > +++ b/arch/arm64/boot/dts/qcom/sm8450.dtsi > @@ -2873,7 +2873,7 @@ opp-358000000 { > }; > > mdss_dsi0_phy: phy@ae94400 { > - compatible = "qcom,dsi-phy-5nm-8450"; > + compatible = "qcom,sm8450-dsi-phy-5nm"; > reg = <0 0x0ae94400 0 0x200>, > <0 0x0ae94600 0 0x280>, > <0 0x0ae94900 0 0x260>; > @@ -2946,7 +2946,7 @@ mdss_dsi1_out: endpoint { > }; > > mdss_dsi1_phy: phy@ae96400 { > - compatible = "qcom,dsi-phy-5nm-8450"; > + compatible = "qcom,sm8450-dsi-phy-5nm"; > reg = <0 0x0ae96400 0 0x200>, > <0 0x0ae96600 0 0x280>, > <0 0x0ae96900 0 0x260>; Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on HDK8450
On Mon, 23 Jan 2023 21:05:52 +0100, Konrad Dybcio wrote: > Use the correct compatible so that the driver can probe properly. > > Applied, thanks! [1/1] arm64: dts: qcom: sm8450: Fix DSIn PHY compatible commit: cce9c1d0b0168a08a3fe49bed6ac78731c69914c Best regards,
diff --git a/arch/arm64/boot/dts/qcom/sm8450.dtsi b/arch/arm64/boot/dts/qcom/sm8450.dtsi index d66dcd8fe61f..8d85a3139849 100644 --- a/arch/arm64/boot/dts/qcom/sm8450.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8450.dtsi @@ -2873,7 +2873,7 @@ opp-358000000 { }; mdss_dsi0_phy: phy@ae94400 { - compatible = "qcom,dsi-phy-5nm-8450"; + compatible = "qcom,sm8450-dsi-phy-5nm"; reg = <0 0x0ae94400 0 0x200>, <0 0x0ae94600 0 0x280>, <0 0x0ae94900 0 0x260>; @@ -2946,7 +2946,7 @@ mdss_dsi1_out: endpoint { }; mdss_dsi1_phy: phy@ae96400 { - compatible = "qcom,dsi-phy-5nm-8450"; + compatible = "qcom,sm8450-dsi-phy-5nm"; reg = <0 0x0ae96400 0 0x200>, <0 0x0ae96600 0 0x280>, <0 0x0ae96900 0 0x260>;
Use the correct compatible so that the driver can probe properly. Fixes: a6dd1206e45a ("arm64: dts: qcom: sm8450: add display hardware devices") Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> --- arch/arm64/boot/dts/qcom/sm8450.dtsi | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)