diff mbox

[2/2] arm64: dts: hip05: Add nor flash support

Message ID 1459416820-18789-2-git-send-email-wangkefeng.wang@huawei.com
State Superseded
Headers show

Commit Message

Kefeng Wang March 31, 2016, 9:33 a.m. UTC 
This patch is to add support nor-flash. Notice, the pre-defined
partitions may not be used.

Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>

---
 arch/arm64/boot/dts/hisilicon/hip05-d02.dts | 34 +++++++++++++++++++++++++++++
 arch/arm64/boot/dts/hisilicon/hip05.dtsi    |  6 +++++
 2 files changed, 40 insertions(+)

-- 
1.7.12.4


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
diff mbox

Patch

diff --git a/arch/arm64/boot/dts/hisilicon/hip05-d02.dts b/arch/arm64/boot/dts/hisilicon/hip05-d02.dts
index e9436c0..abba750 100644
--- a/arch/arm64/boot/dts/hisilicon/hip05-d02.dts
+++ b/arch/arm64/boot/dts/hisilicon/hip05-d02.dts
@@ -52,3 +52,37 @@ 
 &peri_gpio0 {
 	status = "ok";
 };
+
+&lbc {
+	status = "ok";
+	#address-cells = <2>;
+	#size-cells = <1>;
+	ranges = <0 0 0x0 0x90000000 0x08000000>,
+		 <1 0 0x0 0x98000000 0x08000000>;
+
+	nor-flash@0,0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "numonyx,js28f00a", "cfi-flash";
+		reg = <0 0x0 0x08000000>;
+		bank-width = <2>;
+		/* The three parts may not used */
+		partition@0 {
+			label = "BIOS";
+			reg = <0x0 0x300000>;
+		};
+		partition@300000 {
+			label = "Linux";
+			reg = <0x300000 0xa00000>;
+		};
+		partition@1000000 {
+			label = "Rootfs";
+			reg = <0x01000000 0x02000000>;
+		};
+	};
+
+	cpld@1,0 {
+		compatible = "hisilicon,hip05-cpld";
+		reg = <1 0x0 0x100>;
+	};
+};
diff --git a/arch/arm64/boot/dts/hisilicon/hip05.dtsi b/arch/arm64/boot/dts/hisilicon/hip05.dtsi
index d1911ea..46ff5f6 100644
--- a/arch/arm64/boot/dts/hisilicon/hip05.dtsi
+++ b/arch/arm64/boot/dts/hisilicon/hip05.dtsi
@@ -327,6 +327,12 @@ 
 			status = "disabled";
 		};
 
+		lbc: localbus@80380000 {
+			compatible = "hisilicon,hisi-localbus", "simple-bus";
+			reg = <0x0 0x80380000 0x0 0x10000>;
+			status = "disabled";
+		};
+
 		peri_gpio0: gpio@802e0000 {
 			#address-cells = <1>;
 			#size-cells = <0>;