| Message ID | 20230129130059.1322858-1-j.neuschaefer@gmx.net |
|---|---|
| State | New |
| Headers | show |
| Series | dt-bindings: mmc: fsl-imx-esdhc: Improve grammar and fix a typo | expand |
On Sun, 29 Jan 2023 at 14:01, Jonathan Neuschäfer <j.neuschaefer@gmx.net> wrote: > > This makes the text read a little better. > > Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Applied for next, thanks! Kind regards Uffe > --- > Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.yaml | 4 ++-- > 1 file changed, 2 insertions(+), 2 deletions(-) > > diff --git a/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.yaml b/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.yaml > index dc6256f04b423..1c79b68753da0 100644 > --- a/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.yaml > +++ b/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.yaml > @@ -98,7 +98,7 @@ properties: > Specify the number of delay cells for override mode. > This is used to set the clock delay for DLL(Delay Line) on override mode > to select a proper data sampling window in case the clock quality is not good > - due to signal path is too long on the board. Please refer to eSDHC/uSDHC > + because the signal path is too long on the board. Please refer to eSDHC/uSDHC > chapter, DLL (Delay Line) section in RM for details. > default: 0 > > @@ -127,7 +127,7 @@ properties: > Specify the increasing delay cell steps in tuning procedure. > The uSDHC use one delay cell as default increasing step to do tuning process. > This property allows user to change the tuning step to more than one delay > - cells which is useful for some special boards or cards when the default > + cell which is useful for some special boards or cards when the default > tuning step can't find the proper delay window within limited tuning retries. > default: 0 > > -- > 2.39.0 >
diff --git a/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.yaml b/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.yaml index dc6256f04b423..1c79b68753da0 100644 --- a/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.yaml +++ b/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.yaml @@ -98,7 +98,7 @@ properties: Specify the number of delay cells for override mode. This is used to set the clock delay for DLL(Delay Line) on override mode to select a proper data sampling window in case the clock quality is not good - due to signal path is too long on the board. Please refer to eSDHC/uSDHC + because the signal path is too long on the board. Please refer to eSDHC/uSDHC chapter, DLL (Delay Line) section in RM for details. default: 0 @@ -127,7 +127,7 @@ properties: Specify the increasing delay cell steps in tuning procedure. The uSDHC use one delay cell as default increasing step to do tuning process. This property allows user to change the tuning step to more than one delay - cells which is useful for some special boards or cards when the default + cell which is useful for some special boards or cards when the default tuning step can't find the proper delay window within limited tuning retries. default: 0
This makes the text read a little better. Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> --- Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.yaml | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) -- 2.39.0