@@ -263,6 +263,7 @@ enum exynos_dsi_type {
DSIM_TYPE_EXYNOS5410,
DSIM_TYPE_EXYNOS5422,
DSIM_TYPE_EXYNOS5433,
+ DSIM_TYPE_IMX8MM,
DSIM_TYPE_COUNT,
};
@@ -1465,6 +1466,32 @@ static void exynos_dsi_atomic_post_disable(struct drm_bridge *bridge,
pm_runtime_put_sync(dsi->dev);
}
+static int exynos_dsi_atomic_check(struct drm_bridge *bridge,
+ struct drm_bridge_state *bridge_state,
+ struct drm_crtc_state *crtc_state,
+ struct drm_connector_state *conn_state)
+{
+ struct exynos_dsi *dsi = bridge_to_dsi(bridge);
+ struct drm_display_mode *adjusted_mode = &crtc_state->adjusted_mode;
+
+ /*
+ * The i.MX8M Mini/Nano glue logic between LCDIF and DSIM
+ * inverts HS/VS/DE sync signals polarity, therefore, while
+ * i.MX 8M Mini Applications Processor Reference Manual Rev. 3, 11/2020
+ * 13.6.3.5.2 RGB interface
+ * i.MX 8M Nano Applications Processor Reference Manual Rev. 2, 07/2022
+ * 13.6.2.7.2 RGB interface
+ * both claim "Vsync, Hsync, and VDEN are active high signals.", the
+ * LCDIF must generate inverted HS/VS/DE signals, i.e. active LOW.
+ */
+ if (dsi->plat_data->hw_type == DSIM_TYPE_IMX8MM) {
+ adjusted_mode->flags |= (DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC);
+ adjusted_mode->flags &= ~(DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC);
+ }
+
+ return 0;
+}
+
static void exynos_dsi_mode_set(struct drm_bridge *bridge,
const struct drm_display_mode *mode,
const struct drm_display_mode *adjusted_mode)
@@ -1487,6 +1514,7 @@ static const struct drm_bridge_funcs exynos_dsi_bridge_funcs = {
.atomic_duplicate_state = drm_atomic_helper_bridge_duplicate_state,
.atomic_destroy_state = drm_atomic_helper_bridge_destroy_state,
.atomic_reset = drm_atomic_helper_bridge_reset,
+ .atomic_check = exynos_dsi_atomic_check,
.atomic_pre_enable = exynos_dsi_atomic_pre_enable,
.atomic_enable = exynos_dsi_atomic_enable,
.atomic_disable = exynos_dsi_atomic_disable,