diff mbox series

[v1,1/8] thermal: intel: intel_pch: Make pch_wpt_add_acpi_psv_trip() return int

Message ID 1941501.usQuhbGJ8B@kreacher
State New
Headers show
Series thermal: intel: intel_pch: Code simplification and cleanups | expand

Commit Message

Rafael J. Wysocki Jan. 30, 2023, 6:58 p.m. UTC 
From: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Modify pch_wpt_add_acpi_psv_trip() to return an int value instead of
using a return pointer for that.

While at it, drop an excessive empty code line.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
---
 drivers/thermal/intel/intel_pch_thermal.c |   21 +++++++++------------
 1 file changed, 9 insertions(+), 12 deletions(-)

Comments

Daniel Lezcano Jan. 31, 2023, 1:16 p.m. UTC | #1 
On 30/01/2023 19:58, Rafael J. Wysocki wrote:
> From: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
> 
> Modify pch_wpt_add_acpi_psv_trip() to return an int value instead of
> using a return pointer for that.
> 
> While at it, drop an excessive empty code line.
> 
> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
> ---

Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
diff mbox series

Patch

Index: linux-pm/drivers/thermal/intel/intel_pch_thermal.c
===================================================================
--- linux-pm.orig/drivers/thermal/intel/intel_pch_thermal.c
+++ linux-pm/drivers/thermal/intel/intel_pch_thermal.c
@@ -90,34 +90,31 @@  struct pch_thermal_device {
 };
 
 #ifdef CONFIG_ACPI
-
 /*
  * On some platforms, there is a companion ACPI device, which adds
  * passive trip temperature using _PSV method. There is no specific
  * passive temperature setting in MMIO interface of this PCI device.
  */
-static void pch_wpt_add_acpi_psv_trip(struct pch_thermal_device *ptd,
-				      int *nr_trips)
+static int pch_wpt_add_acpi_psv_trip(struct pch_thermal_device *ptd, int trip)
 {
 	struct acpi_device *adev;
 	int temp;
 
 	adev = ACPI_COMPANION(&ptd->pdev->dev);
 	if (!adev)
-		return;
+		return 0;
 
 	if (thermal_acpi_passive_trip_temp(adev, &temp) || temp <= 0)
-		return;
+		return 0;
 
-	ptd->trips[*nr_trips].type = THERMAL_TRIP_PASSIVE;
-	ptd->trips[*nr_trips].temperature = temp;
-	++(*nr_trips);
+	ptd->trips[trip].type = THERMAL_TRIP_PASSIVE;
+	ptd->trips[trip].temperature = temp;
+	return 1;
 }
 #else
-static void pch_wpt_add_acpi_psv_trip(struct pch_thermal_device *ptd,
-				      int *nr_trips)
+static int pch_wpt_add_acpi_psv_trip(struct pch_thermal_device *ptd, int trip)
 {
-
+	return 0;
 }
 #endif
 
@@ -167,7 +164,7 @@  read_trips:
 		++(*nr_trips);
 	}
 
-	pch_wpt_add_acpi_psv_trip(ptd, nr_trips);
+	*nr_trips += pch_wpt_add_acpi_psv_trip(ptd, *nr_trips);
 
 	return 0;
 }