| Message ID | 1459589383-16914-14-git-send-email-guodong.xu@linaro.org |
|---|---|
| State | Superseded |
| Headers | show |
On Sat, Apr 02, 2016 at 05:29:40PM +0800, Guodong Xu wrote: > Signed-off-by: Guodong Xu <guodong.xu@linaro.org> > --- > arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts | 41 ++++++++++++++++++++++++++ > 1 file changed, 41 insertions(+) > > diff --git a/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts b/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts > index c4f560a..28bc646 100644 > --- a/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts > +++ b/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts > @@ -63,6 +63,47 @@ > status = "ok"; > }; > }; > + > + leds { > + compatible = "gpio-leds"; > + user_led4 { Don't use underscores in node names: user-led4 > + label = "user_led4"; We need to make sure the node names and labels are aligned with other boards. There's some discussion about this for the new db600 board. This looks closer to what we should have than what we have for db410c currently. Rob
diff --git a/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts b/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts index c4f560a..28bc646 100644 --- a/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts +++ b/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts @@ -63,6 +63,47 @@ status = "ok"; }; }; + + leds { + compatible = "gpio-leds"; + user_led4 { + label = "user_led4"; + gpios = <&gpio4 0 0>; /* <&gpio_user_led_1>; */ + linux,default-trigger = "heartbeat"; + }; + + user_led3 { + label = "user_led3"; + gpios = <&gpio4 1 0>; /* <&gpio_user_led_2>; */ + linux,default-trigger = "mmc0"; + }; + + user_led2 { + label = "user_led2"; + gpios = <&gpio4 2 0>; /* <&gpio_user_led_3>; */ + linux,default-trigger = "mmc1"; + }; + + user_led1 { + label = "user_led1"; + gpios = <&gpio4 3 0>; /* <&gpio_user_led_4>; */ + linux,default-trigger = "cpu0"; + }; + + wlan_active_led { + label = "wifi_active"; + gpios = <&gpio3 5 0>; /* <&gpio_wlan_active_led>; */ + linux,default-trigger = "phy0tx"; + default-state = "off"; + }; + + bt_active_led { + label = "bt_active"; + gpios = <&gpio4 7 0>; /* <&gpio_bt_active_led>; */ + linux,default-trigger = "hci0rx"; + default-state = "off"; + }; + }; }; &uart2 {
Signed-off-by: Guodong Xu <guodong.xu@linaro.org> --- arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts | 41 ++++++++++++++++++++++++++ 1 file changed, 41 insertions(+) -- 1.9.1