diff mbox series

[V4,6/9] i2c: xiic: Remove interrupt enable/disable in Rx path

Message ID 1675330898-563-7-git-send-email-manikanta.guntupalli@amd.com
State New
Headers show
Series Added Standard mode and SMBus support. | expand

Commit Message

Manikanta Guntupalli Feb. 2, 2023, 9:41 a.m. UTC
From: Raviteja Narayanam <raviteja.narayanam@xilinx.com>

'DYNAMIC_MODE_READ_BROKEN_BIT' quirk added in the driver,
effected IP versions no longer enter dynamic mode.
So, remove local_irq_save/local_irq_restore APIs from driver.

Signed-off-by: Raviteja Narayanam <raviteja.narayanam@xilinx.com>
Signed-off-by: Manikanta Guntupalli <manikanta.guntupalli@amd.com>
Acked-by: Michal Simek <michal.simek@amd.com>
---
 drivers/i2c/busses/i2c-xiic.c | 5 -----
 1 file changed, 5 deletions(-)

Comments

Wolfram Sang Feb. 3, 2023, 4:37 p.m. UTC | #1
On Thu, Feb 02, 2023 at 03:11:35PM +0530, Manikanta Guntupalli wrote:
> From: Raviteja Narayanam <raviteja.narayanam@xilinx.com>
> 
> 'DYNAMIC_MODE_READ_BROKEN_BIT' quirk added in the driver,
> effected IP versions no longer enter dynamic mode.
> So, remove local_irq_save/local_irq_restore APIs from driver.
> 
> Signed-off-by: Raviteja Narayanam <raviteja.narayanam@xilinx.com>
> Signed-off-by: Manikanta Guntupalli <manikanta.guntupalli@amd.com>
> Acked-by: Michal Simek <michal.simek@amd.com>

Applied to for-next, thanks!
diff mbox series

Patch

diff --git a/drivers/i2c/busses/i2c-xiic.c b/drivers/i2c/busses/i2c-xiic.c
index 554f83e34a2a..8503b5016aaf 100644
--- a/drivers/i2c/busses/i2c-xiic.c
+++ b/drivers/i2c/busses/i2c-xiic.c
@@ -741,7 +741,6 @@  static void xiic_start_recv(struct xiic_i2c *i2c)
 	u16 rx_watermark;
 	u8 cr = 0, rfd_set = 0;
 	struct i2c_msg *msg = i2c->rx_msg = i2c->tx_msg;
-	unsigned long flags;
 
 	dev_dbg(i2c->adap.dev.parent, "%s entry, ISR: 0x%x, CR: 0x%x\n",
 		__func__, xiic_getreg32(i2c, XIIC_IISR_OFFSET),
@@ -773,8 +772,6 @@  static void xiic_start_recv(struct xiic_i2c *i2c)
 			bytes--;
 		xiic_setreg8(i2c, XIIC_RFD_REG_OFFSET, bytes);
 
-		local_irq_save(flags);
-
 		/* write the address */
 		xiic_setreg16(i2c, XIIC_DTR_REG_OFFSET,
 			      i2c_8bit_addr_from_msg(msg) |
@@ -787,8 +784,6 @@  static void xiic_start_recv(struct xiic_i2c *i2c)
 		xiic_setreg16(i2c, XIIC_DTR_REG_OFFSET, val);
 
 		xiic_irq_clr_en(i2c, XIIC_INTR_BNB_MASK);
-
-		local_irq_restore(flags);
 	} else {
 		/*
 		 * If previous message is Tx, make sure that Tx FIFO is empty