diff mbox series

[v3,1/3] mmc: sdhci-of-dwcmshc: Update DLL and pre-change delay for rockchip platform

Message ID 1675298118-64243-2-git-send-email-shawn.lin@rock-chips.com
State New
Headers show
Series Some features and fix for sdhci-of-dwcmshc | expand

Commit Message

Shawn Lin Feb. 2, 2023, 12:35 a.m. UTC
For Rockchip platform, DLL bypass bit and start bit need to be set if
DLL is not locked. And adjust pre-change delay to 0x3 for better signal
test result.

Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
---

Changes in v2: None

 drivers/mmc/host/sdhci-of-dwcmshc.c | 13 +++++++++----
 1 file changed, 9 insertions(+), 4 deletions(-)

Comments

Ulf Hansson Feb. 13, 2023, 11:48 p.m. UTC | #1
On Thu, 2 Feb 2023 at 01:35, Shawn Lin <shawn.lin@rock-chips.com> wrote:
>
> For Rockchip platform, DLL bypass bit and start bit need to be set if
> DLL is not locked. And adjust pre-change delay to 0x3 for better signal
> test result.
>
> Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>

Applied for next, thanks!

Kind regards
Uffe


> ---
>
> Changes in v2: None
>
>  drivers/mmc/host/sdhci-of-dwcmshc.c | 13 +++++++++----
>  1 file changed, 9 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/mmc/host/sdhci-of-dwcmshc.c b/drivers/mmc/host/sdhci-of-dwcmshc.c
> index 4933867..46b1ce7 100644
> --- a/drivers/mmc/host/sdhci-of-dwcmshc.c
> +++ b/drivers/mmc/host/sdhci-of-dwcmshc.c
> @@ -48,6 +48,7 @@
>  #define DWCMSHC_EMMC_DLL_RXCLK_SRCSEL  29
>  #define DWCMSHC_EMMC_DLL_START_POINT   16
>  #define DWCMSHC_EMMC_DLL_INC           8
> +#define DWCMSHC_EMMC_DLL_BYPASS                BIT(24)
>  #define DWCMSHC_EMMC_DLL_DLYENA                BIT(27)
>  #define DLL_TXCLK_TAPNUM_DEFAULT       0x10
>  #define DLL_TXCLK_TAPNUM_90_DEGREES    0xA
> @@ -60,6 +61,7 @@
>  #define DLL_RXCLK_NO_INVERTER          1
>  #define DLL_RXCLK_INVERTER             0
>  #define DLL_CMDOUT_TAPNUM_90_DEGREES   0x8
> +#define DLL_RXCLK_ORI_GATE             BIT(31)
>  #define DLL_CMDOUT_TAPNUM_FROM_SW      BIT(24)
>  #define DLL_CMDOUT_SRC_CLK_NEG         BIT(28)
>  #define DLL_CMDOUT_EN_SRC_CLK_NEG      BIT(29)
> @@ -234,9 +236,12 @@ static void dwcmshc_rk3568_set_clock(struct sdhci_host *host, unsigned int clock
>         sdhci_writel(host, extra, reg);
>
>         if (clock <= 52000000) {
> -               /* Disable DLL and reset both of sample and drive clock */
> -               sdhci_writel(host, 0, DWCMSHC_EMMC_DLL_CTRL);
> -               sdhci_writel(host, 0, DWCMSHC_EMMC_DLL_RXCLK);
> +               /*
> +                * Disable DLL and reset both of sample and drive clock.
> +                * The bypass bit and start bit need to be set if DLL is not locked.
> +                */
> +               sdhci_writel(host, DWCMSHC_EMMC_DLL_BYPASS | DWCMSHC_EMMC_DLL_START, DWCMSHC_EMMC_DLL_CTRL);
> +               sdhci_writel(host, DLL_RXCLK_ORI_GATE, DWCMSHC_EMMC_DLL_RXCLK);
>                 sdhci_writel(host, 0, DWCMSHC_EMMC_DLL_TXCLK);
>                 sdhci_writel(host, 0, DECMSHC_EMMC_DLL_CMDOUT);
>                 /*
> @@ -279,7 +284,7 @@ static void dwcmshc_rk3568_set_clock(struct sdhci_host *host, unsigned int clock
>         }
>
>         extra = 0x1 << 16 | /* tune clock stop en */
> -               0x2 << 17 | /* pre-change delay */
> +               0x3 << 17 | /* pre-change delay */
>                 0x3 << 19;  /* post-change delay */
>         sdhci_writel(host, extra, dwc_priv->vendor_specific_area1 + DWCMSHC_EMMC_ATCTRL);
>
> --
> 2.7.4
>
diff mbox series

Patch

diff --git a/drivers/mmc/host/sdhci-of-dwcmshc.c b/drivers/mmc/host/sdhci-of-dwcmshc.c
index 4933867..46b1ce7 100644
--- a/drivers/mmc/host/sdhci-of-dwcmshc.c
+++ b/drivers/mmc/host/sdhci-of-dwcmshc.c
@@ -48,6 +48,7 @@ 
 #define DWCMSHC_EMMC_DLL_RXCLK_SRCSEL	29
 #define DWCMSHC_EMMC_DLL_START_POINT	16
 #define DWCMSHC_EMMC_DLL_INC		8
+#define DWCMSHC_EMMC_DLL_BYPASS		BIT(24)
 #define DWCMSHC_EMMC_DLL_DLYENA		BIT(27)
 #define DLL_TXCLK_TAPNUM_DEFAULT	0x10
 #define DLL_TXCLK_TAPNUM_90_DEGREES	0xA
@@ -60,6 +61,7 @@ 
 #define DLL_RXCLK_NO_INVERTER		1
 #define DLL_RXCLK_INVERTER		0
 #define DLL_CMDOUT_TAPNUM_90_DEGREES	0x8
+#define DLL_RXCLK_ORI_GATE		BIT(31)
 #define DLL_CMDOUT_TAPNUM_FROM_SW	BIT(24)
 #define DLL_CMDOUT_SRC_CLK_NEG		BIT(28)
 #define DLL_CMDOUT_EN_SRC_CLK_NEG	BIT(29)
@@ -234,9 +236,12 @@  static void dwcmshc_rk3568_set_clock(struct sdhci_host *host, unsigned int clock
 	sdhci_writel(host, extra, reg);
 
 	if (clock <= 52000000) {
-		/* Disable DLL and reset both of sample and drive clock */
-		sdhci_writel(host, 0, DWCMSHC_EMMC_DLL_CTRL);
-		sdhci_writel(host, 0, DWCMSHC_EMMC_DLL_RXCLK);
+		/*
+		 * Disable DLL and reset both of sample and drive clock.
+		 * The bypass bit and start bit need to be set if DLL is not locked.
+		 */
+		sdhci_writel(host, DWCMSHC_EMMC_DLL_BYPASS | DWCMSHC_EMMC_DLL_START, DWCMSHC_EMMC_DLL_CTRL);
+		sdhci_writel(host, DLL_RXCLK_ORI_GATE, DWCMSHC_EMMC_DLL_RXCLK);
 		sdhci_writel(host, 0, DWCMSHC_EMMC_DLL_TXCLK);
 		sdhci_writel(host, 0, DECMSHC_EMMC_DLL_CMDOUT);
 		/*
@@ -279,7 +284,7 @@  static void dwcmshc_rk3568_set_clock(struct sdhci_host *host, unsigned int clock
 	}
 
 	extra = 0x1 << 16 | /* tune clock stop en */
-		0x2 << 17 | /* pre-change delay */
+		0x3 << 17 | /* pre-change delay */
 		0x3 << 19;  /* post-change delay */
 	sdhci_writel(host, extra, dwc_priv->vendor_specific_area1 + DWCMSHC_EMMC_ATCTRL);