diff mbox series

[v5,1/3] dt-bindings: i2c: Add CP2112 HID USB to SMBus Bridge

Message ID 20230210223638.12796-2-kaehndan@gmail.com
State Superseded
Headers show
Series Firmware Support for USB-HID Devices and CP2112 | expand

Commit Message

Daniel Kaehn Feb. 10, 2023, 10:36 p.m. UTC
This is a USB HID device which includes an I2C controller and 8 GPIO pins.

The binding allows describing the chip's gpio and i2c controller in DT
using the subnodes named "gpio" and "i2c", respectively. This is
intended to be used in configurations where the CP2112 is permanently
connected in hardware.

Signed-off-by: Danny Kaehn <kaehndan@gmail.com>
---
 .../bindings/i2c/silabs,cp2112.yaml           | 113 ++++++++++++++++++
 1 file changed, 113 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/i2c/silabs,cp2112.yaml

Comments

Rob Herring (Arm) Feb. 14, 2023, 11:53 p.m. UTC | #1
On Fri, Feb 10, 2023 at 04:36:36PM -0600, Danny Kaehn wrote:
> This is a USB HID device which includes an I2C controller and 8 GPIO pins.
> 
> The binding allows describing the chip's gpio and i2c controller in DT
> using the subnodes named "gpio" and "i2c", respectively. This is
> intended to be used in configurations where the CP2112 is permanently
> connected in hardware.
> 
> Signed-off-by: Danny Kaehn <kaehndan@gmail.com>
> ---
>  .../bindings/i2c/silabs,cp2112.yaml           | 113 ++++++++++++++++++
>  1 file changed, 113 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/i2c/silabs,cp2112.yaml
> 
> diff --git a/Documentation/devicetree/bindings/i2c/silabs,cp2112.yaml b/Documentation/devicetree/bindings/i2c/silabs,cp2112.yaml
> new file mode 100644
> index 000000000000..81eda01ebda5
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/i2c/silabs,cp2112.yaml
> @@ -0,0 +1,113 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/i2c/silabs,cp2112.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: CP2112 HID USB to SMBus/I2C Bridge
> +
> +maintainers:
> +  - Danny Kaehn <kaehndan@gmail.com>
> +
> +description:
> +  The CP2112 is a USB HID device which includes an integrated I2C controller
> +  and 8 GPIO pins. Its GPIO pins can each be configured as inputs, open-drain
> +  outputs, or push-pull outputs.
> +
> +properties:
> +  compatible:
> +    const: usb10c4,ea90
> +
> +  reg:
> +    maxItems: 1
> +    description: The USB port number on the host controller
> +
> +  i2c:
> +    description: The SMBus/I2C controller node for the CP2112
> +    $ref: /schemas/i2c/i2c-controller.yaml#
> +    unevaluatedProperties: false
> +
> +    properties:
> +      sda-gpios:
> +        maxItems: 1
> +
> +      scl-gpios:
> +        maxItems: 1
> +
> +      clock-frequency:
> +        minimum: 10000
> +        default: 100000
> +        maximum: 400000
> +
> +  gpio:
> +    description: The GPIO controller node for the CP2112
> +    type: object
> +    unevaluatedProperties: false
> +
> +    properties:
> +      interrupt-controller: true
> +      "#interrupt-cells":
> +        const: 2
> +
> +      gpio-controller: true
> +      "#gpio-cells":
> +        const: 2
> +
> +      gpio-line-names:
> +        minItems: 1
> +        maxItems: 8
> +
> +    patternProperties:
> +      "^(.+-hog(-[0-9]+)?)$":

This can be simplified to: '-hog(-[0-9]+)?$'

Otherwise,

Reviewed-by: Rob Herring <robh@kernel.org>
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/i2c/silabs,cp2112.yaml b/Documentation/devicetree/bindings/i2c/silabs,cp2112.yaml
new file mode 100644
index 000000000000..81eda01ebda5
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/silabs,cp2112.yaml
@@ -0,0 +1,113 @@ 
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i2c/silabs,cp2112.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: CP2112 HID USB to SMBus/I2C Bridge
+
+maintainers:
+  - Danny Kaehn <kaehndan@gmail.com>
+
+description:
+  The CP2112 is a USB HID device which includes an integrated I2C controller
+  and 8 GPIO pins. Its GPIO pins can each be configured as inputs, open-drain
+  outputs, or push-pull outputs.
+
+properties:
+  compatible:
+    const: usb10c4,ea90
+
+  reg:
+    maxItems: 1
+    description: The USB port number on the host controller
+
+  i2c:
+    description: The SMBus/I2C controller node for the CP2112
+    $ref: /schemas/i2c/i2c-controller.yaml#
+    unevaluatedProperties: false
+
+    properties:
+      sda-gpios:
+        maxItems: 1
+
+      scl-gpios:
+        maxItems: 1
+
+      clock-frequency:
+        minimum: 10000
+        default: 100000
+        maximum: 400000
+
+  gpio:
+    description: The GPIO controller node for the CP2112
+    type: object
+    unevaluatedProperties: false
+
+    properties:
+      interrupt-controller: true
+      "#interrupt-cells":
+        const: 2
+
+      gpio-controller: true
+      "#gpio-cells":
+        const: 2
+
+      gpio-line-names:
+        minItems: 1
+        maxItems: 8
+
+    patternProperties:
+      "^(.+-hog(-[0-9]+)?)$":
+        type: object
+
+        required:
+          - gpio-hog
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/gpio/gpio.h>
+
+    usb {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      device@1 {
+        compatible = "usb10c4,ea90";
+        reg = <1>;
+
+        i2c {
+          #address-cells = <1>;
+          #size-cells = <0>;
+          sda-gpios = <&cp2112_gpio 0 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+          scl-gpios = <&cp2112_gpio 1 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+
+          temp@48 {
+            compatible = "national,lm75";
+            reg = <0x48>;
+          };
+        };
+
+        cp2112_gpio: gpio {
+          gpio-controller;
+          interrupt-controller;
+          #gpio-cells = <2>;
+          gpio-line-names = "CP2112_SDA", "CP2112_SCL", "TEST2",
+            "TEST3","TEST4", "TEST5", "TEST6";
+
+          fan-rst-hog {
+              gpio-hog;
+              gpios = <7 GPIO_ACTIVE_HIGH>;
+              output-high;
+              line-name = "FAN_RST";
+          };
+        };
+      };
+    };