diff mbox series

[1/2] watchdog: sbsa_wdog: Fix the timeout calculation while programming

Message ID 20230207044603.1011555-1-george.cherian@marvell.com
State New
Headers show
Series [1/2] watchdog: sbsa_wdog: Fix the timeout calculation while programming | expand

Commit Message

George Cherian Feb. 7, 2023, 4:46 a.m. UTC 
The time out calculation done in sbsa_gwdt_set_timeout() would always
return a 32-bit value. Use proper typecasting to make sure the overflow
values are captured.

Fixes: abd3ac7902fb ("watchdog: sbsa: Support architecture version 1")

Signed-off-by: George Cherian <george.cherian@marvell.com>
---
 drivers/watchdog/sbsa_gwdt.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
diff mbox series

Patch

diff --git a/drivers/watchdog/sbsa_gwdt.c b/drivers/watchdog/sbsa_gwdt.c
index 9791c74aebd4..aaa3f5631f29 100644
--- a/drivers/watchdog/sbsa_gwdt.c
+++ b/drivers/watchdog/sbsa_gwdt.c
@@ -152,14 +152,14 @@  static int sbsa_gwdt_set_timeout(struct watchdog_device *wdd,
 	wdd->timeout = timeout;
 
 	if (action)
-		sbsa_gwdt_reg_write(gwdt->clk * timeout, gwdt);
+		sbsa_gwdt_reg_write((u64)gwdt->clk * (u64)timeout, gwdt);
 	else
 		/*
 		 * In the single stage mode, The first signal (WS0) is ignored,
 		 * the timeout is (WOR * 2), so the WOR should be configured
 		 * to half value of timeout.
 		 */
-		sbsa_gwdt_reg_write(gwdt->clk / 2 * timeout, gwdt);
+		sbsa_gwdt_reg_write((u64)gwdt->clk / 2 * (u64)timeout, gwdt);
 
 	return 0;
 }