| Message ID | 20230203-dt-bindings-network-class-v2-4-499686795073@jannau.net |
|---|---|
| State | New |
| Headers | show |
| Series | dt-bindings: net: Add network-class.yaml schema | expand |
On 2/12/23 06:16, Janne Grunau wrote: > The given value of 1518 seems to refer to the layer 2 ethernet frame > size without 802.1Q tag. Actual use of the "max-frame-size" including in > the consumer of the "altr,tse-1.0" compatible is the MTU. > > Fixes: 95acd4c7b69c ("nios2: Device tree support") > Fixes: 61c610ec61bb ("nios2: Add Max10 device tree") > Signed-off-by: Janne Grunau <j@jannau.net> > --- > arch/nios2/boot/dts/10m50_devboard.dts | 2 +- > arch/nios2/boot/dts/3c120_devboard.dts | 2 +- > 2 files changed, 2 insertions(+), 2 deletions(-) > > diff --git a/arch/nios2/boot/dts/10m50_devboard.dts b/arch/nios2/boot/dts/10m50_devboard.dts > index 56339bef3247..0e7e5b0dd685 100644 > --- a/arch/nios2/boot/dts/10m50_devboard.dts > +++ b/arch/nios2/boot/dts/10m50_devboard.dts > @@ -97,7 +97,7 @@ rgmii_0_eth_tse_0: ethernet@400 { > rx-fifo-depth = <8192>; > tx-fifo-depth = <8192>; > address-bits = <48>; > - max-frame-size = <1518>; > + max-frame-size = <1500>; > local-mac-address = [00 00 00 00 00 00]; > altr,has-supplementary-unicast; > altr,enable-sup-addr = <1>; > diff --git a/arch/nios2/boot/dts/3c120_devboard.dts b/arch/nios2/boot/dts/3c120_devboard.dts > index d10fb81686c7..3ee316906379 100644 > --- a/arch/nios2/boot/dts/3c120_devboard.dts > +++ b/arch/nios2/boot/dts/3c120_devboard.dts > @@ -106,7 +106,7 @@ tse_mac: ethernet@4000 { > interrupt-names = "rx_irq", "tx_irq"; > rx-fifo-depth = <8192>; > tx-fifo-depth = <8192>; > - max-frame-size = <1518>; > + max-frame-size = <1500>; > local-mac-address = [ 00 00 00 00 00 00 ]; > phy-mode = "rgmii-id"; > phy-handle = <&phy0>; > Applied! Thanks, Dinh
diff --git a/arch/nios2/boot/dts/10m50_devboard.dts b/arch/nios2/boot/dts/10m50_devboard.dts index 56339bef3247..0e7e5b0dd685 100644 --- a/arch/nios2/boot/dts/10m50_devboard.dts +++ b/arch/nios2/boot/dts/10m50_devboard.dts @@ -97,7 +97,7 @@ rgmii_0_eth_tse_0: ethernet@400 { rx-fifo-depth = <8192>; tx-fifo-depth = <8192>; address-bits = <48>; - max-frame-size = <1518>; + max-frame-size = <1500>; local-mac-address = [00 00 00 00 00 00]; altr,has-supplementary-unicast; altr,enable-sup-addr = <1>; diff --git a/arch/nios2/boot/dts/3c120_devboard.dts b/arch/nios2/boot/dts/3c120_devboard.dts index d10fb81686c7..3ee316906379 100644 --- a/arch/nios2/boot/dts/3c120_devboard.dts +++ b/arch/nios2/boot/dts/3c120_devboard.dts @@ -106,7 +106,7 @@ tse_mac: ethernet@4000 { interrupt-names = "rx_irq", "tx_irq"; rx-fifo-depth = <8192>; tx-fifo-depth = <8192>; - max-frame-size = <1518>; + max-frame-size = <1500>; local-mac-address = [ 00 00 00 00 00 00 ]; phy-mode = "rgmii-id"; phy-handle = <&phy0>;
The given value of 1518 seems to refer to the layer 2 ethernet frame size without 802.1Q tag. Actual use of the "max-frame-size" including in the consumer of the "altr,tse-1.0" compatible is the MTU. Fixes: 95acd4c7b69c ("nios2: Device tree support") Fixes: 61c610ec61bb ("nios2: Add Max10 device tree") Signed-off-by: Janne Grunau <j@jannau.net> --- arch/nios2/boot/dts/10m50_devboard.dts | 2 +- arch/nios2/boot/dts/3c120_devboard.dts | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-)