diff mbox series

[RFC,v3,8/9] board: schneider: add RZN1 board support

Message ID 20230222154414.49219-9-ralph.siemsen@linaro.org
State Superseded
Headers show
Series Renesas RZ/N1 SoC initial support | expand

Commit Message

Ralph Siemsen Feb. 22, 2023, 3:44 p.m. UTC
Add support for Schneider Electronics RZ/N1D and RZ/N1S boards, which
are based on the Reneasas RZ/N1 SoC devices.

The intention is to support both boards using a single defconfig, and to
handle the differences at runtime.

Signed-off-by: Ralph Siemsen <ralph.siemsen@linaro.org>
---

Changes in v3:
- rename board LCES to rzn1-snarc
- move CONFIG_SYS_NS16550_MEM32 to Kconfig
- define CFG_SYS_INIT_RAM_{ADDR,SIZE}
- removed debug uart settings from defconfig

 arch/arm/dts/r9a06g032-rzn1-snarc.dts         |  51 +++
 arch/arm/mach-rzn1/Kconfig                    |  14 +
 board/schneider/rzn1-snarc/Kconfig            |  18 +
 board/schneider/rzn1-snarc/Makefile           |   3 +
 board/schneider/rzn1-snarc/ddr_timing.c       | 140 ++++++
 .../jedec_ddr3_2g_x16_1333h_500_cl8.h         | 399 ++++++++++++++++++
 board/schneider/rzn1-snarc/rzn1.c             |  39 ++
 configs/rzn1_snarc_defconfig                  |  21 +
 include/configs/rzn1-snarc.h                  |  17 +
 9 files changed, 702 insertions(+)
 create mode 100644 arch/arm/dts/r9a06g032-rzn1-snarc.dts
 create mode 100644 board/schneider/rzn1-snarc/Kconfig
 create mode 100644 board/schneider/rzn1-snarc/Makefile
 create mode 100644 board/schneider/rzn1-snarc/ddr_timing.c
 create mode 100644 board/schneider/rzn1-snarc/jedec_ddr3_2g_x16_1333h_500_cl8.h
 create mode 100644 board/schneider/rzn1-snarc/rzn1.c
 create mode 100644 configs/rzn1_snarc_defconfig
 create mode 100644 include/configs/rzn1-snarc.h
diff mbox series

Patch

diff --git a/arch/arm/dts/r9a06g032-rzn1-snarc.dts b/arch/arm/dts/r9a06g032-rzn1-snarc.dts
new file mode 100644
index 0000000000..abb269cc21
--- /dev/null
+++ b/arch/arm/dts/r9a06g032-rzn1-snarc.dts
@@ -0,0 +1,51 @@ 
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for Schneider RZ/N1 Board
+ *
+ * Based on r9a06g032-rzn1d400-db.dts
+ */
+
+/dts-v1/;
+
+#include "r9a06g032.dtsi"
+#include <dt-bindings/pinctrl/rzn1-pinctrl.h>
+
+/ {
+	model = "Schneider RZ/N1 Board";
+	compatible = "schneider,rzn1", "renesas,r9a06g032";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x80000000 0x10000000>;
+	};
+};
+
+&ddrctrl {
+	status = "okay";
+};
+
+&pinctrl {
+	status = "okay";
+
+	pins_uart0: pins_uart0 {
+		pinmux = <
+			RZN1_PINMUX(103, RZN1_FUNC_UART0_I)     /* UART0_TXD */
+			RZN1_PINMUX(104, RZN1_FUNC_UART0_I)     /* UART0_RXD */
+			>;
+		bias-disable;
+	};
+};
+
+&uart0 {
+	pinctrl-0 = <&pins_uart0>;
+	pinctrl-names = "default";
+	status = "okay";
+};
diff --git a/arch/arm/mach-rzn1/Kconfig b/arch/arm/mach-rzn1/Kconfig
index 707895874d..4b13afbb32 100644
--- a/arch/arm/mach-rzn1/Kconfig
+++ b/arch/arm/mach-rzn1/Kconfig
@@ -15,4 +15,18 @@  endchoice
 config SYS_SOC
 	default "rzn1"
 
+choice
+	prompt "Board select"
+	default TARGET_SCHNEIDER_RZN1
+
+config TARGET_SCHNEIDER_RZN1
+	bool "Schneider RZN1 board"
+	help
+	  Support the Schneider RZN1D and RZN1S boards, which are based
+	  on the Renesas RZ/N1 SoC.
+
+endchoice
+
+source "board/schneider/rzn1-snarc/Kconfig"
+
 endif
diff --git a/board/schneider/rzn1-snarc/Kconfig b/board/schneider/rzn1-snarc/Kconfig
new file mode 100644
index 0000000000..bb6d394077
--- /dev/null
+++ b/board/schneider/rzn1-snarc/Kconfig
@@ -0,0 +1,18 @@ 
+if TARGET_SCHNEIDER_RZN1
+
+config TEXT_BASE
+	default 0x20040000 if ARCH_RZN1
+
+config SYS_MONITOR_LEN
+	default 524288 if ARCH_RZN1
+
+config SYS_BOARD
+	default "rzn1-snarc"
+
+config SYS_VENDOR
+	default "schneider"
+
+config SYS_CONFIG_NAME
+	default "rzn1-snarc"
+
+endif
diff --git a/board/schneider/rzn1-snarc/Makefile b/board/schneider/rzn1-snarc/Makefile
new file mode 100644
index 0000000000..95c151898b
--- /dev/null
+++ b/board/schneider/rzn1-snarc/Makefile
@@ -0,0 +1,3 @@ 
+# SPDX-License-Identifier:	GPL-2.0+
+
+obj-y	:= rzn1.o ddr_timing.o
diff --git a/board/schneider/rzn1-snarc/ddr_timing.c b/board/schneider/rzn1-snarc/ddr_timing.c
new file mode 100644
index 0000000000..8bc3fe7be4
--- /dev/null
+++ b/board/schneider/rzn1-snarc/ddr_timing.c
@@ -0,0 +1,140 @@ 
+// SPDX-License-Identifier: GPL-2.0
+
+#include <asm/types.h>
+
+#include "jedec_ddr3_2g_x16_1333h_500_cl8.h"
+
+u32 ddr_00_87_async[] = {
+	DENALI_CTL_00_DATA,
+	DENALI_CTL_01_DATA,
+	DENALI_CTL_02_DATA,
+	DENALI_CTL_03_DATA,
+	DENALI_CTL_04_DATA,
+	DENALI_CTL_05_DATA,
+	DENALI_CTL_06_DATA,
+	DENALI_CTL_07_DATA,
+	DENALI_CTL_08_DATA,
+	DENALI_CTL_09_DATA,
+
+	DENALI_CTL_10_DATA,
+	DENALI_CTL_11_DATA,
+	DENALI_CTL_12_DATA,
+	DENALI_CTL_13_DATA,
+	DENALI_CTL_14_DATA,
+	DENALI_CTL_15_DATA,
+	DENALI_CTL_16_DATA,
+	DENALI_CTL_17_DATA,
+	DENALI_CTL_18_DATA,
+	DENALI_CTL_19_DATA,
+
+	DENALI_CTL_20_DATA,
+	DENALI_CTL_21_DATA,
+	DENALI_CTL_22_DATA,
+	DENALI_CTL_23_DATA,
+	DENALI_CTL_24_DATA,
+	DENALI_CTL_25_DATA,
+	DENALI_CTL_26_DATA,
+	DENALI_CTL_27_DATA,
+	DENALI_CTL_28_DATA,
+	DENALI_CTL_29_DATA,
+
+	DENALI_CTL_30_DATA,
+	DENALI_CTL_31_DATA,
+	DENALI_CTL_32_DATA,
+	DENALI_CTL_33_DATA,
+	DENALI_CTL_34_DATA,
+	DENALI_CTL_35_DATA,
+	DENALI_CTL_36_DATA,
+	DENALI_CTL_37_DATA,
+	DENALI_CTL_38_DATA,
+	DENALI_CTL_39_DATA,
+
+	DENALI_CTL_40_DATA,
+	DENALI_CTL_41_DATA,
+	DENALI_CTL_42_DATA,
+	DENALI_CTL_43_DATA,
+	DENALI_CTL_44_DATA,
+	DENALI_CTL_45_DATA,
+	DENALI_CTL_46_DATA,
+	DENALI_CTL_47_DATA,
+	DENALI_CTL_48_DATA,
+	DENALI_CTL_49_DATA,
+
+	DENALI_CTL_50_DATA,
+	DENALI_CTL_51_DATA,
+	DENALI_CTL_52_DATA,
+	DENALI_CTL_53_DATA,
+	DENALI_CTL_54_DATA,
+	DENALI_CTL_55_DATA,
+	DENALI_CTL_56_DATA,
+	DENALI_CTL_57_DATA,
+	DENALI_CTL_58_DATA,
+	DENALI_CTL_59_DATA,
+
+	DENALI_CTL_60_DATA,
+	DENALI_CTL_61_DATA,
+	DENALI_CTL_62_DATA,
+	DENALI_CTL_63_DATA,
+	DENALI_CTL_64_DATA,
+	DENALI_CTL_65_DATA,
+	DENALI_CTL_66_DATA,
+	DENALI_CTL_67_DATA,
+	DENALI_CTL_68_DATA,
+	DENALI_CTL_69_DATA,
+
+	DENALI_CTL_70_DATA,
+	DENALI_CTL_71_DATA,
+	DENALI_CTL_72_DATA,
+	DENALI_CTL_73_DATA,
+	DENALI_CTL_74_DATA,
+	DENALI_CTL_75_DATA,
+	DENALI_CTL_76_DATA,
+	DENALI_CTL_77_DATA,
+	DENALI_CTL_78_DATA,
+	DENALI_CTL_79_DATA,
+
+	DENALI_CTL_80_DATA,
+	DENALI_CTL_81_DATA,
+	DENALI_CTL_82_DATA,
+	DENALI_CTL_83_DATA,
+	DENALI_CTL_84_DATA,
+	DENALI_CTL_85_DATA,
+	DENALI_CTL_86_DATA,
+	DENALI_CTL_87_DATA,
+	DENALI_CTL_88_DATA,
+	DENALI_CTL_89_DATA,
+
+	DENALI_CTL_90_DATA,
+	DENALI_CTL_91_DATA,
+	DENALI_CTL_92_DATA,
+};
+
+u32 ddr_350_374_async[] = {
+	DENALI_CTL_350_DATA,
+	DENALI_CTL_351_DATA,
+	DENALI_CTL_352_DATA,
+	DENALI_CTL_353_DATA,
+	DENALI_CTL_354_DATA,
+	DENALI_CTL_355_DATA,
+	DENALI_CTL_356_DATA,
+	DENALI_CTL_357_DATA,
+	DENALI_CTL_358_DATA,
+	DENALI_CTL_359_DATA,
+
+	DENALI_CTL_360_DATA,
+	DENALI_CTL_361_DATA,
+	DENALI_CTL_362_DATA,
+	DENALI_CTL_363_DATA,
+	DENALI_CTL_364_DATA,
+	DENALI_CTL_365_DATA,
+	DENALI_CTL_366_DATA,
+	DENALI_CTL_367_DATA,
+	DENALI_CTL_368_DATA,
+	DENALI_CTL_369_DATA,
+
+	DENALI_CTL_370_DATA,
+	DENALI_CTL_371_DATA,
+	DENALI_CTL_372_DATA,
+	DENALI_CTL_373_DATA,
+	DENALI_CTL_374_DATA,
+};
diff --git a/board/schneider/rzn1-snarc/jedec_ddr3_2g_x16_1333h_500_cl8.h b/board/schneider/rzn1-snarc/jedec_ddr3_2g_x16_1333h_500_cl8.h
new file mode 100644
index 0000000000..5c55518bc1
--- /dev/null
+++ b/board/schneider/rzn1-snarc/jedec_ddr3_2g_x16_1333h_500_cl8.h
@@ -0,0 +1,399 @@ 
+
+/* ****************************************************************
+ *        CADENCE                    Copyright (c) 2001-2011      *
+ *                                   Cadence Design Systems, Inc. *
+ *                                   All rights reserved.         *
+ *                                                                *
+ ******************************************************************
+ *  The values calculated from this script are meant to be        *
+ *  representative programmings.   The values may not reflect the *
+ *  actual required programming for production use.   Please      *
+ *  closely review all programmed values for technical accuracy   *
+ *  before use in production parts.                               *
+ ******************************************************************
+ *
+ *   Module:         regconfig.h
+ *   Documentation:  Register programming header file
+ *
+ ******************************************************************
+ ******************************************************************
+ * WARNING:  This file was automatically generated.  Manual
+ * editing may result in undetermined behavior.
+ ******************************************************************
+ ******************************************************************/
+
+#define               DENALI_CTL_00_DATA 0x00000600
+#define               DENALI_CTL_01_DATA 0x00000000
+#define               DENALI_CTL_02_DATA 0x00000000
+#define               DENALI_CTL_03_DATA 0x00000000
+#define               DENALI_CTL_04_DATA 0x00000000
+#define               DENALI_CTL_05_DATA 0x00000000
+#define               DENALI_CTL_06_DATA 0x00000000
+#define               DENALI_CTL_07_DATA 0x00000005
+#define               DENALI_CTL_08_DATA 0x000186a0
+#define               DENALI_CTL_09_DATA 0x0003d090
+#define               DENALI_CTL_10_DATA 0x00000000
+#define               DENALI_CTL_11_DATA 0x10000200
+#define               DENALI_CTL_12_DATA 0x04040006
+#define               DENALI_CTL_13_DATA 0x04121904
+#define               DENALI_CTL_14_DATA 0x04041707
+#define               DENALI_CTL_15_DATA 0x00891c0c
+#define               DENALI_CTL_16_DATA 0x07000503
+#define               DENALI_CTL_17_DATA 0x01010008
+#define               DENALI_CTL_18_DATA 0x0007030f
+#define               DENALI_CTL_19_DATA 0x01000000
+#define               DENALI_CTL_20_DATA 0x0f340050
+#define               DENALI_CTL_21_DATA 0x00000005
+#define               DENALI_CTL_22_DATA 0x000c0003
+#define               DENALI_CTL_23_DATA 0x00000000
+#define               DENALI_CTL_24_DATA 0x00550200
+#define               DENALI_CTL_25_DATA 0x00010000
+#define               DENALI_CTL_26_DATA 0x00050500
+#define               DENALI_CTL_27_DATA 0x00000000
+#define               DENALI_CTL_28_DATA 0x00000000
+#define               DENALI_CTL_29_DATA 0x00000000
+#define               DENALI_CTL_30_DATA 0x00000000
+#define               DENALI_CTL_31_DATA 0x00084000
+#define               DENALI_CTL_32_DATA 0x00080046
+#define               DENALI_CTL_33_DATA 0x00000000
+#define               DENALI_CTL_34_DATA 0x00460840
+#define               DENALI_CTL_35_DATA 0x00000008
+#define               DENALI_CTL_36_DATA 0x00010000
+#define               DENALI_CTL_37_DATA 0x00000000
+#define               DENALI_CTL_38_DATA 0x00000000
+#define               DENALI_CTL_39_DATA 0x00000000
+#define               DENALI_CTL_40_DATA 0x00000000
+#define               DENALI_CTL_41_DATA 0x00000000
+#define               DENALI_CTL_42_DATA 0x00000000
+#define               DENALI_CTL_43_DATA 0x00000000
+#define               DENALI_CTL_44_DATA 0x00000000
+#define               DENALI_CTL_45_DATA 0x01000200
+#define               DENALI_CTL_46_DATA 0x02000040
+#define               DENALI_CTL_47_DATA 0x00000040
+#define               DENALI_CTL_48_DATA 0x02000100
+#define               DENALI_CTL_49_DATA 0xffff0a01
+#define               DENALI_CTL_50_DATA 0x01010101
+#define               DENALI_CTL_51_DATA 0x01010101
+#define               DENALI_CTL_52_DATA 0x01030101
+#define               DENALI_CTL_53_DATA 0x0c030000
+#define               DENALI_CTL_54_DATA 0x00000000
+#define               DENALI_CTL_55_DATA 0x00000100
+#define               DENALI_CTL_56_DATA 0x00000000
+#define               DENALI_CTL_57_DATA 0x00000000
+#define               DENALI_CTL_58_DATA 0x00000000
+#define               DENALI_CTL_59_DATA 0x00000000
+#define               DENALI_CTL_60_DATA 0x00000000
+#define               DENALI_CTL_61_DATA 0x00000000
+#define               DENALI_CTL_62_DATA 0x01020000
+#define               DENALI_CTL_63_DATA 0x06050201
+#define               DENALI_CTL_64_DATA 0x02000106
+#define               DENALI_CTL_65_DATA 0x00000000
+#define               DENALI_CTL_66_DATA 0x02020202
+#define               DENALI_CTL_67_DATA 0x00000200
+#define               DENALI_CTL_68_DATA 0x00000000
+#define               DENALI_CTL_69_DATA 0x00000000
+#define               DENALI_CTL_70_DATA 0x00000000
+#define               DENALI_CTL_71_DATA 0x00280d00
+#define               DENALI_CTL_72_DATA 0x00000000
+#define               DENALI_CTL_73_DATA 0x00000100
+#define               DENALI_CTL_74_DATA 0x00010001
+#define               DENALI_CTL_75_DATA 0x00000000
+#define               DENALI_CTL_76_DATA 0x00000000
+#define               DENALI_CTL_77_DATA 0x00000000
+#define               DENALI_CTL_78_DATA 0x00000000
+#define               DENALI_CTL_79_DATA 0x00222200
+#define               DENALI_CTL_80_DATA 0x00000001
+#define               DENALI_CTL_81_DATA 0x00000000
+#define               DENALI_CTL_82_DATA 0x00000000
+#define               DENALI_CTL_83_DATA 0x00012222
+#define               DENALI_CTL_84_DATA 0x00000000
+#define               DENALI_CTL_85_DATA 0x00000000
+#define               DENALI_CTL_86_DATA 0x00222200
+#define               DENALI_CTL_87_DATA 0x02020001
+#define               DENALI_CTL_88_DATA 0x00020200
+#define               DENALI_CTL_89_DATA 0x02000202
+#define               DENALI_CTL_90_DATA 0x01000002
+#define               DENALI_CTL_91_DATA 0x00000000
+#define               DENALI_CTL_92_DATA 0x0003ffff
+#define               DENALI_CTL_93_DATA 0x00000000
+#define               DENALI_CTL_94_DATA 0x0003ffff
+#define               DENALI_CTL_95_DATA 0x00000000
+#define               DENALI_CTL_96_DATA 0x0003ffff
+#define               DENALI_CTL_97_DATA 0x00000000
+#define               DENALI_CTL_98_DATA 0x0003ffff
+#define               DENALI_CTL_99_DATA 0x00000000
+#define              DENALI_CTL_100_DATA 0x0003ffff
+#define              DENALI_CTL_101_DATA 0x00000000
+#define              DENALI_CTL_102_DATA 0x0003ffff
+#define              DENALI_CTL_103_DATA 0x00000000
+#define              DENALI_CTL_104_DATA 0x0003ffff
+#define              DENALI_CTL_105_DATA 0x00000000
+#define              DENALI_CTL_106_DATA 0x0003ffff
+#define              DENALI_CTL_107_DATA 0x00000000
+#define              DENALI_CTL_108_DATA 0x0003ffff
+#define              DENALI_CTL_109_DATA 0x00000000
+#define              DENALI_CTL_110_DATA 0x0003ffff
+#define              DENALI_CTL_111_DATA 0x00000000
+#define              DENALI_CTL_112_DATA 0x0003ffff
+#define              DENALI_CTL_113_DATA 0x00000000
+#define              DENALI_CTL_114_DATA 0x0003ffff
+#define              DENALI_CTL_115_DATA 0x00000000
+#define              DENALI_CTL_116_DATA 0x0003ffff
+#define              DENALI_CTL_117_DATA 0x00000000
+#define              DENALI_CTL_118_DATA 0x0003ffff
+#define              DENALI_CTL_119_DATA 0x00000000
+#define              DENALI_CTL_120_DATA 0x0003ffff
+#define              DENALI_CTL_121_DATA 0x00000000
+#define              DENALI_CTL_122_DATA 0x0003ffff
+#define              DENALI_CTL_123_DATA 0x00000000
+#define              DENALI_CTL_124_DATA 0x0003ffff
+#define              DENALI_CTL_125_DATA 0x00000000
+#define              DENALI_CTL_126_DATA 0x0003ffff
+#define              DENALI_CTL_127_DATA 0x00000000
+#define              DENALI_CTL_128_DATA 0x0003ffff
+#define              DENALI_CTL_129_DATA 0x00000000
+#define              DENALI_CTL_130_DATA 0x0003ffff
+#define              DENALI_CTL_131_DATA 0x00000000
+#define              DENALI_CTL_132_DATA 0x0003ffff
+#define              DENALI_CTL_133_DATA 0x00000000
+#define              DENALI_CTL_134_DATA 0x0003ffff
+#define              DENALI_CTL_135_DATA 0x00000000
+#define              DENALI_CTL_136_DATA 0x0003ffff
+#define              DENALI_CTL_137_DATA 0x00000000
+#define              DENALI_CTL_138_DATA 0x0003ffff
+#define              DENALI_CTL_139_DATA 0x00000000
+#define              DENALI_CTL_140_DATA 0x0003ffff
+#define              DENALI_CTL_141_DATA 0x00000000
+#define              DENALI_CTL_142_DATA 0x0003ffff
+#define              DENALI_CTL_143_DATA 0x00000000
+#define              DENALI_CTL_144_DATA 0x0003ffff
+#define              DENALI_CTL_145_DATA 0x00000000
+#define              DENALI_CTL_146_DATA 0x0003ffff
+#define              DENALI_CTL_147_DATA 0x00000000
+#define              DENALI_CTL_148_DATA 0x0003ffff
+#define              DENALI_CTL_149_DATA 0x00000000
+#define              DENALI_CTL_150_DATA 0x0003ffff
+#define              DENALI_CTL_151_DATA 0x00000000
+#define              DENALI_CTL_152_DATA 0x0003ffff
+#define              DENALI_CTL_153_DATA 0x00000000
+#define              DENALI_CTL_154_DATA 0x0003ffff
+#define              DENALI_CTL_155_DATA 0x00000000
+#define              DENALI_CTL_156_DATA 0x0003ffff
+#define              DENALI_CTL_157_DATA 0x00000000
+#define              DENALI_CTL_158_DATA 0x0003ffff
+#define              DENALI_CTL_159_DATA 0x00000000
+#define              DENALI_CTL_160_DATA 0x0003ffff
+#define              DENALI_CTL_161_DATA 0x00000000
+#define              DENALI_CTL_162_DATA 0x0003ffff
+#define              DENALI_CTL_163_DATA 0x00000000
+#define              DENALI_CTL_164_DATA 0x0003ffff
+#define              DENALI_CTL_165_DATA 0x00000000
+#define              DENALI_CTL_166_DATA 0x0003ffff
+#define              DENALI_CTL_167_DATA 0x00000000
+#define              DENALI_CTL_168_DATA 0x0003ffff
+#define              DENALI_CTL_169_DATA 0x00000000
+#define              DENALI_CTL_170_DATA 0x0003ffff
+#define              DENALI_CTL_171_DATA 0x00000000
+#define              DENALI_CTL_172_DATA 0x0003ffff
+#define              DENALI_CTL_173_DATA 0x00000000
+#define              DENALI_CTL_174_DATA 0x0003ffff
+#define              DENALI_CTL_175_DATA 0x00000000
+#define              DENALI_CTL_176_DATA 0x0003ffff
+#define              DENALI_CTL_177_DATA 0x00000000
+#define              DENALI_CTL_178_DATA 0x0003ffff
+#define              DENALI_CTL_179_DATA 0x00000000
+#define              DENALI_CTL_180_DATA 0x0003ffff
+#define              DENALI_CTL_181_DATA 0x00000000
+#define              DENALI_CTL_182_DATA 0x0003ffff
+#define              DENALI_CTL_183_DATA 0x00000000
+#define              DENALI_CTL_184_DATA 0x0003ffff
+#define              DENALI_CTL_185_DATA 0x00000000
+#define              DENALI_CTL_186_DATA 0x0003ffff
+#define              DENALI_CTL_187_DATA 0x00000000
+#define              DENALI_CTL_188_DATA 0x0003ffff
+#define              DENALI_CTL_189_DATA 0x00000000
+#define              DENALI_CTL_190_DATA 0x0003ffff
+#define              DENALI_CTL_191_DATA 0x00000000
+#define              DENALI_CTL_192_DATA 0x0003ffff
+#define              DENALI_CTL_193_DATA 0x00000000
+#define              DENALI_CTL_194_DATA 0x0003ffff
+#define              DENALI_CTL_195_DATA 0x00000000
+#define              DENALI_CTL_196_DATA 0x0003ffff
+#define              DENALI_CTL_197_DATA 0x00000000
+#define              DENALI_CTL_198_DATA 0x0003ffff
+#define              DENALI_CTL_199_DATA 0x00000000
+#define              DENALI_CTL_200_DATA 0x0003ffff
+#define              DENALI_CTL_201_DATA 0x00000000
+#define              DENALI_CTL_202_DATA 0x0003ffff
+#define              DENALI_CTL_203_DATA 0x00000000
+#define              DENALI_CTL_204_DATA 0x0003ffff
+#define              DENALI_CTL_205_DATA 0x00000000
+#define              DENALI_CTL_206_DATA 0x0003ffff
+#define              DENALI_CTL_207_DATA 0x00000000
+#define              DENALI_CTL_208_DATA 0x0003ffff
+#define              DENALI_CTL_209_DATA 0x00000000
+#define              DENALI_CTL_210_DATA 0x0003ffff
+#define              DENALI_CTL_211_DATA 0x00000000
+#define              DENALI_CTL_212_DATA 0x0003ffff
+#define              DENALI_CTL_213_DATA 0x00000000
+#define              DENALI_CTL_214_DATA 0x0003ffff
+#define              DENALI_CTL_215_DATA 0x00000000
+#define              DENALI_CTL_216_DATA 0x0003ffff
+#define              DENALI_CTL_217_DATA 0x00000000
+#define              DENALI_CTL_218_DATA 0x0303ffff
+#define              DENALI_CTL_219_DATA 0xffffffff
+#define              DENALI_CTL_220_DATA 0x00030f0f
+#define              DENALI_CTL_221_DATA 0xffffffff
+#define              DENALI_CTL_222_DATA 0x00030f0f
+#define              DENALI_CTL_223_DATA 0xffffffff
+#define              DENALI_CTL_224_DATA 0x00030f0f
+#define              DENALI_CTL_225_DATA 0xffffffff
+#define              DENALI_CTL_226_DATA 0x00030f0f
+#define              DENALI_CTL_227_DATA 0xffffffff
+#define              DENALI_CTL_228_DATA 0x00030f0f
+#define              DENALI_CTL_229_DATA 0xffffffff
+#define              DENALI_CTL_230_DATA 0x00030f0f
+#define              DENALI_CTL_231_DATA 0xffffffff
+#define              DENALI_CTL_232_DATA 0x00030f0f
+#define              DENALI_CTL_233_DATA 0xffffffff
+#define              DENALI_CTL_234_DATA 0x00030f0f
+#define              DENALI_CTL_235_DATA 0xffffffff
+#define              DENALI_CTL_236_DATA 0x00030f0f
+#define              DENALI_CTL_237_DATA 0xffffffff
+#define              DENALI_CTL_238_DATA 0x00030f0f
+#define              DENALI_CTL_239_DATA 0xffffffff
+#define              DENALI_CTL_240_DATA 0x00030f0f
+#define              DENALI_CTL_241_DATA 0xffffffff
+#define              DENALI_CTL_242_DATA 0x00030f0f
+#define              DENALI_CTL_243_DATA 0xffffffff
+#define              DENALI_CTL_244_DATA 0x00030f0f
+#define              DENALI_CTL_245_DATA 0xffffffff
+#define              DENALI_CTL_246_DATA 0x00030f0f
+#define              DENALI_CTL_247_DATA 0xffffffff
+#define              DENALI_CTL_248_DATA 0x00030f0f
+#define              DENALI_CTL_249_DATA 0xffffffff
+#define              DENALI_CTL_250_DATA 0x00030f0f
+#define              DENALI_CTL_251_DATA 0xffffffff
+#define              DENALI_CTL_252_DATA 0x00030f0f
+#define              DENALI_CTL_253_DATA 0xffffffff
+#define              DENALI_CTL_254_DATA 0x00030f0f
+#define              DENALI_CTL_255_DATA 0xffffffff
+#define              DENALI_CTL_256_DATA 0x00030f0f
+#define              DENALI_CTL_257_DATA 0xffffffff
+#define              DENALI_CTL_258_DATA 0x00030f0f
+#define              DENALI_CTL_259_DATA 0xffffffff
+#define              DENALI_CTL_260_DATA 0x00030f0f
+#define              DENALI_CTL_261_DATA 0xffffffff
+#define              DENALI_CTL_262_DATA 0x00030f0f
+#define              DENALI_CTL_263_DATA 0xffffffff
+#define              DENALI_CTL_264_DATA 0x00030f0f
+#define              DENALI_CTL_265_DATA 0xffffffff
+#define              DENALI_CTL_266_DATA 0x00030f0f
+#define              DENALI_CTL_267_DATA 0xffffffff
+#define              DENALI_CTL_268_DATA 0x00030f0f
+#define              DENALI_CTL_269_DATA 0xffffffff
+#define              DENALI_CTL_270_DATA 0x00030f0f
+#define              DENALI_CTL_271_DATA 0xffffffff
+#define              DENALI_CTL_272_DATA 0x00030f0f
+#define              DENALI_CTL_273_DATA 0xffffffff
+#define              DENALI_CTL_274_DATA 0x00030f0f
+#define              DENALI_CTL_275_DATA 0xffffffff
+#define              DENALI_CTL_276_DATA 0x00030f0f
+#define              DENALI_CTL_277_DATA 0xffffffff
+#define              DENALI_CTL_278_DATA 0x00030f0f
+#define              DENALI_CTL_279_DATA 0xffffffff
+#define              DENALI_CTL_280_DATA 0x00030f0f
+#define              DENALI_CTL_281_DATA 0xffffffff
+#define              DENALI_CTL_282_DATA 0x00030f0f
+#define              DENALI_CTL_283_DATA 0xffffffff
+#define              DENALI_CTL_284_DATA 0x00030f0f
+#define              DENALI_CTL_285_DATA 0xffffffff
+#define              DENALI_CTL_286_DATA 0x00030f0f
+#define              DENALI_CTL_287_DATA 0xffffffff
+#define              DENALI_CTL_288_DATA 0x00030f0f
+#define              DENALI_CTL_289_DATA 0xffffffff
+#define              DENALI_CTL_290_DATA 0x00030f0f
+#define              DENALI_CTL_291_DATA 0xffffffff
+#define              DENALI_CTL_292_DATA 0x00030f0f
+#define              DENALI_CTL_293_DATA 0xffffffff
+#define              DENALI_CTL_294_DATA 0x00030f0f
+#define              DENALI_CTL_295_DATA 0xffffffff
+#define              DENALI_CTL_296_DATA 0x00030f0f
+#define              DENALI_CTL_297_DATA 0xffffffff
+#define              DENALI_CTL_298_DATA 0x00030f0f
+#define              DENALI_CTL_299_DATA 0xffffffff
+#define              DENALI_CTL_300_DATA 0x00030f0f
+#define              DENALI_CTL_301_DATA 0xffffffff
+#define              DENALI_CTL_302_DATA 0x00030f0f
+#define              DENALI_CTL_303_DATA 0xffffffff
+#define              DENALI_CTL_304_DATA 0x00030f0f
+#define              DENALI_CTL_305_DATA 0xffffffff
+#define              DENALI_CTL_306_DATA 0x00030f0f
+#define              DENALI_CTL_307_DATA 0xffffffff
+#define              DENALI_CTL_308_DATA 0x00030f0f
+#define              DENALI_CTL_309_DATA 0xffffffff
+#define              DENALI_CTL_310_DATA 0x00030f0f
+#define              DENALI_CTL_311_DATA 0xffffffff
+#define              DENALI_CTL_312_DATA 0x00030f0f
+#define              DENALI_CTL_313_DATA 0xffffffff
+#define              DENALI_CTL_314_DATA 0x00030f0f
+#define              DENALI_CTL_315_DATA 0xffffffff
+#define              DENALI_CTL_316_DATA 0x00030f0f
+#define              DENALI_CTL_317_DATA 0xffffffff
+#define              DENALI_CTL_318_DATA 0x00030f0f
+#define              DENALI_CTL_319_DATA 0xffffffff
+#define              DENALI_CTL_320_DATA 0x00030f0f
+#define              DENALI_CTL_321_DATA 0xffffffff
+#define              DENALI_CTL_322_DATA 0x00030f0f
+#define              DENALI_CTL_323_DATA 0xffffffff
+#define              DENALI_CTL_324_DATA 0x00030f0f
+#define              DENALI_CTL_325_DATA 0xffffffff
+#define              DENALI_CTL_326_DATA 0x00030f0f
+#define              DENALI_CTL_327_DATA 0xffffffff
+#define              DENALI_CTL_328_DATA 0x00030f0f
+#define              DENALI_CTL_329_DATA 0xffffffff
+#define              DENALI_CTL_330_DATA 0x00030f0f
+#define              DENALI_CTL_331_DATA 0xffffffff
+#define              DENALI_CTL_332_DATA 0x00030f0f
+#define              DENALI_CTL_333_DATA 0xffffffff
+#define              DENALI_CTL_334_DATA 0x00030f0f
+#define              DENALI_CTL_335_DATA 0xffffffff
+#define              DENALI_CTL_336_DATA 0x00030f0f
+#define              DENALI_CTL_337_DATA 0xffffffff
+#define              DENALI_CTL_338_DATA 0x00030f0f
+#define              DENALI_CTL_339_DATA 0xffffffff
+#define              DENALI_CTL_340_DATA 0x00030f0f
+#define              DENALI_CTL_341_DATA 0xffffffff
+#define              DENALI_CTL_342_DATA 0x00030f0f
+#define              DENALI_CTL_343_DATA 0xffffffff
+#define              DENALI_CTL_344_DATA 0x00030f0f
+#define              DENALI_CTL_345_DATA 0xffffffff
+#define              DENALI_CTL_346_DATA 0x32030f0f
+#define              DENALI_CTL_347_DATA 0x01320001
+#define              DENALI_CTL_348_DATA 0x00013200
+#define              DENALI_CTL_349_DATA 0x00000132
+#define              DENALI_CTL_350_DATA 0x00000000
+#define              DENALI_CTL_351_DATA 0x000d0000
+#define              DENALI_CTL_352_DATA 0x1e680000
+#define              DENALI_CTL_353_DATA 0x02000200
+#define              DENALI_CTL_354_DATA 0x02000200
+#define              DENALI_CTL_355_DATA 0x00001e68
+#define              DENALI_CTL_356_DATA 0x00009808
+#define              DENALI_CTL_357_DATA 0x00020608
+#define              DENALI_CTL_358_DATA 0x000a0a01
+#define              DENALI_CTL_359_DATA 0x00000000
+#define              DENALI_CTL_360_DATA 0x00000000
+#define              DENALI_CTL_361_DATA 0x04038000
+#define              DENALI_CTL_362_DATA 0x07030a07
+#define              DENALI_CTL_363_DATA 0x00ffff22
+#define              DENALI_CTL_364_DATA 0x000f0010
+#define              DENALI_CTL_365_DATA 0x00000000
+#define              DENALI_CTL_366_DATA 0x00000000
+#define              DENALI_CTL_367_DATA 0x00000000
+#define              DENALI_CTL_368_DATA 0x00000000
+#define              DENALI_CTL_369_DATA 0x00000000
+#define              DENALI_CTL_370_DATA 0x00000204
+#define              DENALI_CTL_371_DATA 0x00000000
+#define              DENALI_CTL_372_DATA 0x01000001
+#define              DENALI_CTL_373_DATA 0x00000001
+#define              DENALI_CTL_374_DATA 0x00000000
diff --git a/board/schneider/rzn1-snarc/rzn1.c b/board/schneider/rzn1-snarc/rzn1.c
new file mode 100644
index 0000000000..a6cb21822f
--- /dev/null
+++ b/board/schneider/rzn1-snarc/rzn1.c
@@ -0,0 +1,39 @@ 
+// SPDX-License-Identifier: GPL-2.0+
+
+#include <common.h>
+#include <dm.h>
+#include <asm/global_data.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+int board_init(void)
+{
+	gd->bd->bi_boot_params = CFG_SYS_SDRAM_BASE + 0x100;
+
+	return 0;
+}
+
+int dram_init(void)
+{
+	struct udevice *dev;
+	int err;
+
+	/* This will end up calling cadence_ddr_probe() */
+	err = uclass_get_device(UCLASS_RAM, 0, &dev);
+	if (err) {
+		debug("DRAM init failed: %d\n", err);
+		return err;
+	}
+
+	if (fdtdec_setup_mem_size_base() != 0)
+		return -EINVAL;
+
+	return 0;
+}
+
+int dram_init_banksize(void)
+{
+	fdtdec_setup_memory_banksize();
+
+	return 0;
+}
diff --git a/configs/rzn1_snarc_defconfig b/configs/rzn1_snarc_defconfig
new file mode 100644
index 0000000000..f0df13bcd9
--- /dev/null
+++ b/configs/rzn1_snarc_defconfig
@@ -0,0 +1,21 @@ 
+CONFIG_ARM=y
+CONFIG_SYS_ARCH_TIMER=y
+CONFIG_SYS_THUMB_BUILD=y
+CONFIG_ARCH_RZN1=y
+CONFIG_SYS_MALLOC_LEN=0xb0000
+CONFIG_SYS_MALLOC_F_LEN=0x800
+CONFIG_NR_DRAM_BANKS=1
+CONFIG_DEFAULT_DEVICE_TREE="r9a06g032-rzn1-snarc"
+CONFIG_SYS_LOAD_ADDR=0x80008000
+CONFIG_SYS_MEMTEST_START=0x80000000
+CONFIG_SYS_MEMTEST_END=0x8fffffff
+CONFIG_CMD_MEMTEST=y
+CONFIG_SYS_ALT_MEMTEST=y
+# CONFIG_SYS_ALT_MEMTEST_BITFLIP is not set
+CONFIG_CMD_CLK=y
+CONFIG_OF_CONTROL=y
+CONFIG_RAM=y
+CONFIG_CADENCE_DDR_CTRL=y
+CONFIG_SYS_NS16550=y
+CONFIG_SYS_NS16550_MEM32=y
+# CONFIG_EFI_LOADER is not set
diff --git a/include/configs/rzn1-snarc.h b/include/configs/rzn1-snarc.h
new file mode 100644
index 0000000000..b97cb48eaa
--- /dev/null
+++ b/include/configs/rzn1-snarc.h
@@ -0,0 +1,17 @@ 
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Configuration settings for the Schneider RZ/N1 board
+ */
+
+#ifndef __RZN1_H
+#define __RZN1_H
+
+/* Internal RAM */
+#define CFG_SYS_INIT_RAM_ADDR	0x20000000
+#define CFG_SYS_INIT_RAM_SIZE	(1 * 1024 * 1024)
+
+/* DDR */
+#define CFG_SYS_SDRAM_BASE	0x80000000
+#define CFG_SYS_SDRAM_SIZE	(256 * 1024 * 1024)
+
+#endif	/* __RZN1_H */