diff mbox series

[2/4] ASoC: dt-bindings: wlf,wm8524: Add a property to specify power up sequency time

Message ID 20230222113945.3390672-2-chancel.liu@nxp.com
State New
Headers show
Series [1/4] ASoC: dt-bindings: wlf,wm8524: Convert to json-schema | expand

Commit Message

Chancel Liu Feb. 22, 2023, 11:39 a.m. UTC 
This property specifies power up to audio out time. It's necessary
beacause this device has to wait some time before ready to output audio
after MCLK, BCLK and MUTE=1 are enabled. For more details about the
timing constraints, please refer to WTN0302 on
https://www.cirrus.com/products/wm8524/

Signed-off-by: Chancel Liu <chancel.liu@nxp.com>
---
 .../devicetree/bindings/sound/wlf,wm8524.yaml          | 10 ++++++++++
 1 file changed, 10 insertions(+)
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/sound/wlf,wm8524.yaml b/Documentation/devicetree/bindings/sound/wlf,wm8524.yaml
index 09c54cc7de95..54b4da5470e4 100644
--- a/Documentation/devicetree/bindings/sound/wlf,wm8524.yaml
+++ b/Documentation/devicetree/bindings/sound/wlf,wm8524.yaml
@@ -21,6 +21,15 @@  properties:
     description:
       a GPIO spec for the MUTE pin.
 
+  wlf,power-up-delay-ms:
+    maximum: 1500
+    default: 100
+    description:
+      Power up sequency delay time in millisecond. It specifies power up to
+      audio out time. For more details about the timing constraints of this
+      device, please refer to WTN0302 on
+      https://www.cirrus.com/products/wm8524/.
+
 required:
   - compatible
   - wlf,mute-gpios
@@ -34,4 +43,5 @@  examples:
     wm8524: codec {
             compatible = "wlf,wm8524";
             wlf,mute-gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
+            wlf,power-up-delay-ms = <300>;
     };