diff mbox

[v2,2/2] fastboot: Enable the respective speed endpoints at runtime

Message ID 570E0388.7080408@ti.com
State Accepted
Commit 8b704a0e3d71ca8d1610ae0a877aa42dfdd8de82
Headers show

Commit Message

Roger Quadros April 13, 2016, 8:30 a.m. UTC 
In a dual speed configuration we need to check at runtime if
we want to enable the Full-Speed or High-Speed endpoint.

Signed-off-by: Roger Quadros <rogerq@ti.com>

Acked-by: Lukasz Majewski <l.majewski@samsung.com>

Tested-by: Steve Rae <srae@broadcom.com>

[Test HW: bcm235xx board]
---
v2:
- removed unnecessary braces in if statement.

 drivers/usb/gadget/f_fastboot.c | 24 +++++++++++++++++-------
 1 file changed, 17 insertions(+), 7 deletions(-)

-- 
2.5.0


_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
diff mbox

Patch

diff --git a/drivers/usb/gadget/f_fastboot.c b/drivers/usb/gadget/f_fastboot.c
index e1038ea..7961231 100644
--- a/drivers/usb/gadget/f_fastboot.c
+++ b/drivers/usb/gadget/f_fastboot.c
@@ -115,6 +115,15 @@  static struct usb_descriptor_header *fb_hs_function[] = {
 	NULL,
 };
 
+static struct usb_endpoint_descriptor *
+fb_ep_desc(struct usb_gadget *g, struct usb_endpoint_descriptor *fs,
+	    struct usb_endpoint_descriptor *hs)
+{
+	if (gadget_is_dualspeed(g) && g->speed == USB_SPEED_HIGH)
+		return hs;
+	return fs;
+}
+
 /*
  * static strings, in UTF-8
  */
@@ -255,18 +264,18 @@  static int fastboot_set_alt(struct usb_function *f,
 	struct usb_composite_dev *cdev = f->config->cdev;
 	struct usb_gadget *gadget = cdev->gadget;
 	struct f_fastboot *f_fb = func_to_fastboot(f);
+	const struct usb_endpoint_descriptor *d;
 
 	debug("%s: func: %s intf: %d alt: %d\n",
 	      __func__, f->name, interface, alt);
 
-	/* make sure we don't enable the ep twice */
-	if (gadget->speed == USB_SPEED_HIGH) {
-		ret = usb_ep_enable(f_fb->out_ep, &hs_ep_out);
+	if (gadget->speed == USB_SPEED_HIGH)
 		is_high_speed = true;
-	} else {
-		ret = usb_ep_enable(f_fb->out_ep, &fs_ep_out);
+	else
 		is_high_speed = false;
-	}
+
+	d = fb_ep_desc(gadget, &fs_ep_out, &hs_ep_out);
+	ret = usb_ep_enable(f_fb->out_ep, d);
 	if (ret) {
 		puts("failed to enable out ep\n");
 		return ret;
@@ -280,7 +289,8 @@  static int fastboot_set_alt(struct usb_function *f,
 	}
 	f_fb->out_req->complete = rx_handler_command;
 
-	ret = usb_ep_enable(f_fb->in_ep, &fs_ep_in);
+	d = fb_ep_desc(gadget, &fs_ep_in, &hs_ep_in);
+	ret = usb_ep_enable(f_fb->in_ep, d);
 	if (ret) {
 		puts("failed to enable in ep\n");
 		goto err;