diff mbox

[RESEND,V3] mmc: core: Detect card removal on I/O error

Message ID 1328261593-6112-1-git-send-email-ulf.hansson@stericsson.com
State New
Headers show

Commit Message

Ulf Hansson Feb. 3, 2012, 9:33 a.m. UTC
To prevent I/O as soon as possible at card removal, a new
detect work is re-scheduled without a delay to let a rescan
remove the card device as soon a possible.

Additionally, MMC_CAP2_DETECT_ON_ERR can now be used to handle
"slowly" removed cards that a scheduled detect work did not
detect as removed. To prevent further I/O requests for these
lingering removed cards, check if card has been removed and then
schedule a detect work to properly remove it.

Signed-off-by: Ulf Hansson <ulf.hansson@stericsson.com>
---

Changes in v3:
	- Check for card is NULL and minor code simplifications.

Changes in v2:
	- Updated according to review comments.
	- Merging two patches for this feature into one.

---
 drivers/mmc/core/core.c  |   24 +++++++++++++++++++++---
 include/linux/mmc/host.h |    1 +
 2 files changed, 22 insertions(+), 3 deletions(-)
diff mbox

Patch

diff --git a/drivers/mmc/core/core.c b/drivers/mmc/core/core.c
index bec0bf2..9645e8c 100644
--- a/drivers/mmc/core/core.c
+++ b/drivers/mmc/core/core.c
@@ -2077,18 +2077,36 @@  int _mmc_detect_card_removed(struct mmc_host *host)
 int mmc_detect_card_removed(struct mmc_host *host)
 {
 	struct mmc_card *card = host->card;
+	int ret;
 
 	WARN_ON(!host->claimed);
+
+	if (!card)
+		return 1;
+
+	ret = mmc_card_removed(card);
 	/*
 	 * The card will be considered unchanged unless we have been asked to
 	 * detect a change or host requires polling to provide card detection.
 	 */
-	if (card && !host->detect_change && !(host->caps & MMC_CAP_NEEDS_POLL))
-		return mmc_card_removed(card);
+	if (!host->detect_change && !(host->caps & MMC_CAP_NEEDS_POLL) &&
+	    !(host->caps2 & MMC_CAP2_DETECT_ON_ERR))
+		return ret;
 
 	host->detect_change = 0;
+	if (!ret) {
+		ret = _mmc_detect_card_removed(host);
+		if (ret) {
+			/*
+			 * Schedule a detect work as soon as possible to let a
+			 * rescan handle the card removal.
+			 */
+			cancel_delayed_work(&host->detect);
+			mmc_detect_change(host, 0);
+		}
+	}
 
-	return _mmc_detect_card_removed(host);
+	return ret;
 }
 EXPORT_SYMBOL(mmc_detect_card_removed);
 
diff --git a/include/linux/mmc/host.h b/include/linux/mmc/host.h
index dd13e05..368a2b9 100644
--- a/include/linux/mmc/host.h
+++ b/include/linux/mmc/host.h
@@ -257,6 +257,7 @@  struct mmc_host {
 #define MMC_CAP2_HS200_1_2V_SDR	(1 << 6)        /* can support */
 #define MMC_CAP2_HS200		(MMC_CAP2_HS200_1_8V_SDR | \
 				 MMC_CAP2_HS200_1_2V_SDR)
+#define MMC_CAP2_DETECT_ON_ERR	(1 << 7)	/* On I/O err check card removal */
 
 	mmc_pm_flag_t		pm_caps;	/* supported pm features */
 	unsigned int        power_notify_type;