diff mbox series

[net-next,11/11] arm: mvebu: dt: Add PHY LED support for 370-rd WAN port

Message ID 20230307170046.28917-12-ansuelsmth@gmail.com
State Superseded
Headers show
Series [net-next,01/11] net: dsa: qca8k: add LEDs basic support | expand

Commit Message

Christian Marangi March 7, 2023, 5 p.m. UTC 
From: Andrew Lunn <andrew@lunn.ch>

The WAN port of the 370-RD has a Marvell PHY, with one LED on
the front panel. List this LED in the device tree.

Set the LED default state to "keep" to not change any blink rule
set by default.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
---
 arch/arm/boot/dts/armada-370-rd.dts | 14 ++++++++++++++
 1 file changed, 14 insertions(+)
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/armada-370-rd.dts b/arch/arm/boot/dts/armada-370-rd.dts
index be005c9f42ef..ccd4699b219f 100644
--- a/arch/arm/boot/dts/armada-370-rd.dts
+++ b/arch/arm/boot/dts/armada-370-rd.dts
@@ -20,6 +20,7 @@ 
 /dts-v1/;
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/leds/common.h>
 #include <dt-bindings/gpio/gpio.h>
 #include "armada-370.dtsi"
 
@@ -135,6 +136,19 @@  &mdio {
 	pinctrl-names = "default";
 	phy0: ethernet-phy@0 {
 		reg = <0>;
+		leds {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			led@0 {
+				reg = <0>;
+				label = "WAN";
+				color = <LED_COLOR_ID_WHITE>;
+				function = LED_FUNCTION_LAN;
+				function-enumerator = <1>;
+				default-state = "keep";
+			};
+		};
 	};
 
 	switch: switch@10 {