diff mbox series

[v4,01/19] ioprio: cleanup interface definition

Message ID 20230309215516.3800571-2-niklas.cassel@wdc.com
State New
Headers show
Series [v4,01/19] ioprio: cleanup interface definition | expand

Commit Message

Niklas Cassel March 9, 2023, 9:54 p.m. UTC
From: Damien Le Moal <damien.lemoal@opensource.wdc.com>

The IO priority user interface defines the 16-bits ioprio values as
the combination of the upper 3-bits for an IO priority class and the
lower 13-bits as priority data. However, the kernel only uses the
lower 3-bits of the priority data to define priority levels for the RT
and BE priority classes. The data part of an ioprio value is completely
ignored for the IDLE and NONE classes. This is enforced by checks done
in ioprio_check_cap(), which is called for all paths that allow defining
an IO priority for IOs: the per-context ioprio_set() system call, aio
interface and io-uring interface.

Clarify this fact in the uapi ioprio.h header file and introduce the
IOPRIO_PRIO_LEVEL_MASK and IOPRIO_PRIO_LEVEL() macros for users to
define and get priority levels in an ioprio value. The coarser macro
IOPRIO_PRIO_DATA() is retained for backward compatibility with old
applications already using it. There is no functional change introduced
with this.

In-kernel users of the IOPRIO_PRIO_DATA() macro which are explicitly
handling IO priority data as a priority level are modified to use the
new IOPRIO_PRIO_LEVEL() macro without any functional change. Since f2fs
is the only user of this macro not explicitly using that value as a
priority level, it is left unchanged.

Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
---
 block/bfq-iosched.c         |  8 ++++----
 block/ioprio.c              |  6 +++---
 include/uapi/linux/ioprio.h | 19 ++++++++++++++-----
 3 files changed, 21 insertions(+), 12 deletions(-)

Comments

Bart Van Assche March 16, 2023, 5:58 p.m. UTC | #1
On 3/9/23 13:54, Niklas Cassel wrote:
>   /*
> - * The RT and BE priority classes both support up to 8 priority levels.
> + * The RT and BE priority classes both support up to 8 priority levels that
> + * can be specified using the lower 3-bits of the priority data.
>    */
> -#define IOPRIO_NR_LEVELS	8
> -#define IOPRIO_BE_NR		IOPRIO_NR_LEVELS
> +#define IOPRIO_LEVEL_NR_BITS		3
> +#define IOPRIO_NR_LEVELS		(1 << IOPRIO_LEVEL_NR_BITS)
> +#define IOPRIO_LEVEL_MASK		(IOPRIO_NR_LEVELS - 1)
> +#define IOPRIO_PRIO_LEVEL(ioprio)	((ioprio) & IOPRIO_LEVEL_MASK)
>   
> +#define IOPRIO_BE_NR			IOPRIO_NR_LEVELS

Is my understanding correct that today four I/O priority levels are 
supported and that these occupy two bits?

Thanks,

Bart.
Bart Van Assche March 16, 2023, 6:09 p.m. UTC | #2
On 3/16/23 10:58, Bart Van Assche wrote:
> On 3/9/23 13:54, Niklas Cassel wrote:
>>   /*
>> - * The RT and BE priority classes both support up to 8 priority levels.
>> + * The RT and BE priority classes both support up to 8 priority 
>> levels that
>> + * can be specified using the lower 3-bits of the priority data.
>>    */
>> -#define IOPRIO_NR_LEVELS    8
>> -#define IOPRIO_BE_NR        IOPRIO_NR_LEVELS
>> +#define IOPRIO_LEVEL_NR_BITS        3
>> +#define IOPRIO_NR_LEVELS        (1 << IOPRIO_LEVEL_NR_BITS)
>> +#define IOPRIO_LEVEL_MASK        (IOPRIO_NR_LEVELS - 1)
>> +#define IOPRIO_PRIO_LEVEL(ioprio)    ((ioprio) & IOPRIO_LEVEL_MASK)
>> +#define IOPRIO_BE_NR            IOPRIO_NR_LEVELS
> 
> Is my understanding correct that today four I/O priority levels are 
> supported and that these occupy two bits?

Please ignore the above question - according to the ioprio_get() man 
page there are eight levels.

Bart.
diff mbox series

Patch

diff --git a/block/bfq-iosched.c b/block/bfq-iosched.c
index 8a8d4441519c..e4ca0a3483d3 100644
--- a/block/bfq-iosched.c
+++ b/block/bfq-iosched.c
@@ -5523,16 +5523,16 @@  bfq_set_next_ioprio_data(struct bfq_queue *bfqq, struct bfq_io_cq *bic)
 		bfqq->new_ioprio_class = task_nice_ioclass(tsk);
 		break;
 	case IOPRIO_CLASS_RT:
-		bfqq->new_ioprio = IOPRIO_PRIO_DATA(bic->ioprio);
+		bfqq->new_ioprio = IOPRIO_PRIO_LEVEL(bic->ioprio);
 		bfqq->new_ioprio_class = IOPRIO_CLASS_RT;
 		break;
 	case IOPRIO_CLASS_BE:
-		bfqq->new_ioprio = IOPRIO_PRIO_DATA(bic->ioprio);
+		bfqq->new_ioprio = IOPRIO_PRIO_LEVEL(bic->ioprio);
 		bfqq->new_ioprio_class = IOPRIO_CLASS_BE;
 		break;
 	case IOPRIO_CLASS_IDLE:
 		bfqq->new_ioprio_class = IOPRIO_CLASS_IDLE;
-		bfqq->new_ioprio = 7;
+		bfqq->new_ioprio = IOPRIO_NR_LEVELS - 1;
 		break;
 	}
 
@@ -5829,7 +5829,7 @@  static struct bfq_queue *bfq_get_queue(struct bfq_data *bfqd,
 				       struct bfq_io_cq *bic,
 				       bool respawn)
 {
-	const int ioprio = IOPRIO_PRIO_DATA(bic->ioprio);
+	const int ioprio = IOPRIO_PRIO_LEVEL(bic->ioprio);
 	const int ioprio_class = IOPRIO_PRIO_CLASS(bic->ioprio);
 	struct bfq_queue **async_bfqq = NULL;
 	struct bfq_queue *bfqq;
diff --git a/block/ioprio.c b/block/ioprio.c
index 32a456b45804..f0d9e818abc5 100644
--- a/block/ioprio.c
+++ b/block/ioprio.c
@@ -33,7 +33,7 @@ 
 int ioprio_check_cap(int ioprio)
 {
 	int class = IOPRIO_PRIO_CLASS(ioprio);
-	int data = IOPRIO_PRIO_DATA(ioprio);
+	int level = IOPRIO_PRIO_LEVEL(ioprio);
 
 	switch (class) {
 		case IOPRIO_CLASS_RT:
@@ -49,13 +49,13 @@  int ioprio_check_cap(int ioprio)
 			fallthrough;
 			/* rt has prio field too */
 		case IOPRIO_CLASS_BE:
-			if (data >= IOPRIO_NR_LEVELS || data < 0)
+			if (level >= IOPRIO_NR_LEVELS)
 				return -EINVAL;
 			break;
 		case IOPRIO_CLASS_IDLE:
 			break;
 		case IOPRIO_CLASS_NONE:
-			if (data)
+			if (level)
 				return -EINVAL;
 			break;
 		default:
diff --git a/include/uapi/linux/ioprio.h b/include/uapi/linux/ioprio.h
index f70f2596a6bf..4444b4e4fdad 100644
--- a/include/uapi/linux/ioprio.h
+++ b/include/uapi/linux/ioprio.h
@@ -17,7 +17,7 @@ 
 	 ((data) & IOPRIO_PRIO_MASK))
 
 /*
- * These are the io priority groups as implemented by the BFQ and mq-deadline
+ * These are the io priority classes as implemented by the BFQ and mq-deadline
  * schedulers. RT is the realtime class, it always gets premium service. For
  * ATA disks supporting NCQ IO priority, RT class IOs will be processed using
  * high priority NCQ commands. BE is the best-effort scheduling class, the
@@ -32,11 +32,20 @@  enum {
 };
 
 /*
- * The RT and BE priority classes both support up to 8 priority levels.
+ * The RT and BE priority classes both support up to 8 priority levels that
+ * can be specified using the lower 3-bits of the priority data.
  */
-#define IOPRIO_NR_LEVELS	8
-#define IOPRIO_BE_NR		IOPRIO_NR_LEVELS
+#define IOPRIO_LEVEL_NR_BITS		3
+#define IOPRIO_NR_LEVELS		(1 << IOPRIO_LEVEL_NR_BITS)
+#define IOPRIO_LEVEL_MASK		(IOPRIO_NR_LEVELS - 1)
+#define IOPRIO_PRIO_LEVEL(ioprio)	((ioprio) & IOPRIO_LEVEL_MASK)
 
+#define IOPRIO_BE_NR			IOPRIO_NR_LEVELS
+
+/*
+ * Possible values for the "which" argument of the ioprio_get() and
+ * ioprio_set() system calls (see "man ioprio_set").
+ */
 enum {
 	IOPRIO_WHO_PROCESS = 1,
 	IOPRIO_WHO_PGRP,
@@ -44,7 +53,7 @@  enum {
 };
 
 /*
- * Fallback BE priority level.
+ * Fallback BE class priority level.
  */
 #define IOPRIO_NORM	4
 #define IOPRIO_BE_NORM	IOPRIO_NORM