diff mbox series

[v2,4/4] serial: qcom_geni: Use devm_krealloc_array

Message ID 20230309150334.216760-5-james.clark@arm.com
State New
Headers show
Series devres: Provide krealloc_array | expand

Commit Message

James Clark March 9, 2023, 3:03 p.m. UTC
Now that it exists, use it instead of doing the multiplication manually.

Signed-off-by: James Clark <james.clark@arm.com>
---
 drivers/tty/serial/qcom_geni_serial.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

Comments

Jonathan Cameron March 11, 2023, 7:18 p.m. UTC | #1
On Thu,  9 Mar 2023 15:03:33 +0000
James Clark <james.clark@arm.com> wrote:

> Now that it exists, use it instead of doing the multiplication manually.
> 
> Signed-off-by: James Clark <james.clark@arm.com>

Hmm. I've stared at the users of this for a bit, and it's not actually obvious
that it's being used as an array of u32.  The only typed user of this is as
the 2nd parameter of  
tty_insert_flip_string() which is an unsigned char *

I wonder if that sizeof(u32) isn't a 'correct' description of where the 4 is coming
from even if it has the right value?  Perhaps the fifo depth is just a multiple of 4?

Jonathan



> ---
>  drivers/tty/serial/qcom_geni_serial.c | 6 +++---
>  1 file changed, 3 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/tty/serial/qcom_geni_serial.c b/drivers/tty/serial/qcom_geni_serial.c
> index d69592e5e2ec..23fc33d182ac 100644
> --- a/drivers/tty/serial/qcom_geni_serial.c
> +++ b/drivers/tty/serial/qcom_geni_serial.c
> @@ -1056,9 +1056,9 @@ static int setup_fifos(struct qcom_geni_serial_port *port)
>  		(port->tx_fifo_depth * port->tx_fifo_width) / BITS_PER_BYTE;
>  
>  	if (port->rx_buf && (old_rx_fifo_depth != port->rx_fifo_depth) && port->rx_fifo_depth) {
> -		port->rx_buf = devm_krealloc(uport->dev, port->rx_buf,
> -					     port->rx_fifo_depth * sizeof(u32),
> -					     GFP_KERNEL);
> +		port->rx_buf = devm_krealloc_array(uport->dev, port->rx_buf,
> +						   port->rx_fifo_depth, sizeof(u32),
> +						   GFP_KERNEL);
>  		if (!port->rx_buf)
>  			return -ENOMEM;
>  	}
James Clark March 20, 2023, 10:03 a.m. UTC | #2
On 18/03/2023 17:34, Jonathan Cameron wrote:
> On Fri, 17 Mar 2023 11:34:49 +0000
> James Clark <james.clark@arm.com> wrote:
> 
>> On 11/03/2023 19:18, Jonathan Cameron wrote:
>>> On Thu,  9 Mar 2023 15:03:33 +0000
>>> James Clark <james.clark@arm.com> wrote:
>>>   
>>>> Now that it exists, use it instead of doing the multiplication manually.
>>>>
>>>> Signed-off-by: James Clark <james.clark@arm.com>  
>>>
>>> Hmm. I've stared at the users of this for a bit, and it's not actually obvious
>>> that it's being used as an array of u32.  The only typed user of this is as
>>> the 2nd parameter of  
>>> tty_insert_flip_string() which is an unsigned char *
>>>
>>> I wonder if that sizeof(u32) isn't a 'correct' description of where the 4 is coming
>>> from even if it has the right value?  Perhaps the fifo depth is just a multiple of 4?
>>>
>>> Jonathan
>>>   
>>
>> The commit that added it (b8caf69a6946) seems to hint that something
>> reads from it in words. And I see this:
>>
>>   /* We always configure 4 bytes per FIFO word */
>>   #define BYTES_PER_FIFO_WORD		4U
>>
>> Perhaps sizeof(u32) isn't as accurate of a description as using
>> BYTES_PER_FIFO_WORD but I'd be reluctant to make a change because I
>> don't really understand the implications.
> 
> Agreed with your analysis.  + fully understand why you don't want to change
> it. 
> 
> I'd be tempted to take the view that whilst it's allocated in 4 byte chunks
> because it's accessed elsewhere as a set of 1 byte entries, krealloc_array
> isn't appropriate and so just leave it with devm_krealloc()
> 
> Risk is that a steady stream of patches will turn up 'fixing' this as
> it will be easy for people to find with a script.  Maybe better to just add
> a comment (either with or without your patch).

Ok that makes sense to me. I can add a comment instead this patch to
change this one.

>>
>> There is also this in handle_rx_console():
>>
>>   unsigned char buf[sizeof(u32)];
>>
>> James
>>
>>>
>>>   
>>>> ---
>>>>  drivers/tty/serial/qcom_geni_serial.c | 6 +++---
>>>>  1 file changed, 3 insertions(+), 3 deletions(-)
>>>>
>>>> diff --git a/drivers/tty/serial/qcom_geni_serial.c b/drivers/tty/serial/qcom_geni_serial.c
>>>> index d69592e5e2ec..23fc33d182ac 100644
>>>> --- a/drivers/tty/serial/qcom_geni_serial.c
>>>> +++ b/drivers/tty/serial/qcom_geni_serial.c
>>>> @@ -1056,9 +1056,9 @@ static int setup_fifos(struct qcom_geni_serial_port *port)
>>>>  		(port->tx_fifo_depth * port->tx_fifo_width) / BITS_PER_BYTE;
>>>>  
>>>>  	if (port->rx_buf && (old_rx_fifo_depth != port->rx_fifo_depth) && port->rx_fifo_depth) {
>>>> -		port->rx_buf = devm_krealloc(uport->dev, port->rx_buf,
>>>> -					     port->rx_fifo_depth * sizeof(u32),
>>>> -					     GFP_KERNEL);
>>>> +		port->rx_buf = devm_krealloc_array(uport->dev, port->rx_buf,
>>>> +						   port->rx_fifo_depth, sizeof(u32),
>>>> +						   GFP_KERNEL);
>>>>  		if (!port->rx_buf)
>>>>  			return -ENOMEM;
>>>>  	}  
>>>   
>
diff mbox series

Patch

diff --git a/drivers/tty/serial/qcom_geni_serial.c b/drivers/tty/serial/qcom_geni_serial.c
index d69592e5e2ec..23fc33d182ac 100644
--- a/drivers/tty/serial/qcom_geni_serial.c
+++ b/drivers/tty/serial/qcom_geni_serial.c
@@ -1056,9 +1056,9 @@  static int setup_fifos(struct qcom_geni_serial_port *port)
 		(port->tx_fifo_depth * port->tx_fifo_width) / BITS_PER_BYTE;
 
 	if (port->rx_buf && (old_rx_fifo_depth != port->rx_fifo_depth) && port->rx_fifo_depth) {
-		port->rx_buf = devm_krealloc(uport->dev, port->rx_buf,
-					     port->rx_fifo_depth * sizeof(u32),
-					     GFP_KERNEL);
+		port->rx_buf = devm_krealloc_array(uport->dev, port->rx_buf,
+						   port->rx_fifo_depth, sizeof(u32),
+						   GFP_KERNEL);
 		if (!port->rx_buf)
 			return -ENOMEM;
 	}