diff mbox series

[2/2] thunderbolt: Disable interrupt auto clear for rings

Message ID 20230310172050.1394-3-mario.limonciello@amd.com
State New
Headers show
Series Fix TX/RX interrupt handling | expand

Commit Message

Mario Limonciello March 10, 2023, 5:20 p.m. UTC
When interrupt auto clear is programmed, any read to the interrupt
status register will clear all interrupts.  If two interrupts have
come in before one can be serviced then this will cause lost interrupts.

On AMD USB4 routers this has manifested in odd problems particularly
with long strings of control tranfers such as reading the DROM via bit
banging.

Instead of clearing interrupts automatically, clear the bit corresponding
to the given ring's interrupt in the ISR.

Fixes: 7a1808f82a37 ("thunderbolt: Handle ring interrupt by reading interrupt status register")
Cc: Sanju Mehta <Sanju.Mehta@amd.com>
Tested-by: Anson Tsao <anson.tsao@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
---
 drivers/thunderbolt/nhi.c      | 40 +++++++++++++++++++++-------------
 drivers/thunderbolt/nhi_regs.h |  6 +++--
 2 files changed, 29 insertions(+), 17 deletions(-)

Comments

Mika Westerberg March 13, 2023, 5:46 a.m. UTC | #1
Hi Mario,

On Fri, Mar 10, 2023 at 11:20:50AM -0600, Mario Limonciello wrote:
> When interrupt auto clear is programmed, any read to the interrupt
> status register will clear all interrupts.  If two interrupts have
> come in before one can be serviced then this will cause lost interrupts.
> 
> On AMD USB4 routers this has manifested in odd problems particularly
> with long strings of control tranfers such as reading the DROM via bit
> banging.

Nice catch! Does this mean we can drop [1] now?

[1] https://git.kernel.org/pub/scm/linux/kernel/git/westeri/thunderbolt.git/commit/?h=next&id=8d7f459107f74fbbdde3dd5b3874d2e748cb8a21

I would still like to keep the nice refactor you did for the DROM
parsing, though.
diff mbox series

Patch

diff --git a/drivers/thunderbolt/nhi.c b/drivers/thunderbolt/nhi.c
index fdc0c3ba2ef01..318d20bd5b695 100644
--- a/drivers/thunderbolt/nhi.c
+++ b/drivers/thunderbolt/nhi.c
@@ -71,24 +71,31 @@  static void ring_interrupt_active(struct tb_ring *ring, bool active)
 		u32 step, shift, ivr, misc;
 		void __iomem *ivr_base;
 		int index;
+		int bit;
 
 		if (ring->is_tx)
 			index = ring->hop;
 		else
 			index = ring->hop + ring->nhi->hop_count;
 
-		if (ring->nhi->quirks & QUIRK_AUTO_CLEAR_INT) {
-			/*
-			 * Ask the hardware to clear interrupt status
-			 * bits automatically since we already know
-			 * which interrupt was triggered.
-			 */
-			misc = ioread32(ring->nhi->iobase + REG_DMA_MISC);
-			if (!(misc & REG_DMA_MISC_INT_AUTO_CLEAR)) {
-				misc |= REG_DMA_MISC_INT_AUTO_CLEAR;
-				iowrite32(misc, ring->nhi->iobase + REG_DMA_MISC);
-			}
-		}
+		/*
+		 * Intel routers support a bit that isn't part of
+		 * the USB4 spec to ask the hardware to clear
+		 * interrupt status bits automatically since
+		 * we already know which interrupt was triggered.
+		 *
+		 * Other routers explicitly disable auto-clear
+		 * to prevent conditions that may occur where two
+		 * MSIX interrupts are simultaneously active and
+		 * reading the register clears both of them.
+		 */
+		misc = ioread32(ring->nhi->iobase + REG_DMA_MISC);
+		if (ring->nhi->quirks & QUIRK_AUTO_CLEAR_INT)
+			bit = REG_DMA_MISC_INT_AUTO_CLEAR;
+		else
+			bit = REG_DMA_MISC_DISABLE_AUTO_CLEAR;
+		if (!(misc & bit))
+			iowrite32(misc | bit, ring->nhi->iobase + REG_DMA_MISC);
 
 		ivr_base = ring->nhi->iobase + REG_INT_VEC_ALLOC_BASE;
 		step = index / REG_INT_VEC_ALLOC_REGS * REG_INT_VEC_ALLOC_BITS;
@@ -393,14 +400,17 @@  EXPORT_SYMBOL_GPL(tb_ring_poll_complete);
 
 static void ring_clear_msix(const struct tb_ring *ring)
 {
+	int bit;
+
 	if (ring->nhi->quirks & QUIRK_AUTO_CLEAR_INT)
 		return;
 
+	bit = ring_interrupt_index(ring) & 31;
 	if (ring->is_tx)
-		ioread32(ring->nhi->iobase + REG_RING_NOTIFY_BASE);
+		iowrite32(BIT(bit), ring->nhi->iobase + REG_RING_INT_CLEAR);
 	else
-		ioread32(ring->nhi->iobase + REG_RING_NOTIFY_BASE +
-			 4 * (ring->nhi->hop_count / 32));
+		iowrite32(BIT(bit), ring->nhi->iobase + REG_RING_INT_CLEAR +
+			  4 * (ring->nhi->hop_count / 32));
 }
 
 static irqreturn_t ring_msix(int irq, void *data)
diff --git a/drivers/thunderbolt/nhi_regs.h b/drivers/thunderbolt/nhi_regs.h
index 0d4970dcef842..faef165a919cc 100644
--- a/drivers/thunderbolt/nhi_regs.h
+++ b/drivers/thunderbolt/nhi_regs.h
@@ -77,12 +77,13 @@  struct ring_desc {
 
 /*
  * three bitfields: tx, rx, rx overflow
- * Every bitfield contains one bit for every hop (REG_HOP_COUNT). Registers are
- * cleared on read. New interrupts are fired only after ALL registers have been
+ * Every bitfield contains one bit for every hop (REG_HOP_COUNT).
+ * New interrupts are fired only after ALL registers have been
  * read (even those containing only disabled rings).
  */
 #define REG_RING_NOTIFY_BASE	0x37800
 #define RING_NOTIFY_REG_COUNT(nhi) ((31 + 3 * nhi->hop_count) / 32)
+#define REG_RING_INT_CLEAR	0x37808
 
 /*
  * two bitfields: rx, tx
@@ -105,6 +106,7 @@  struct ring_desc {
 
 #define REG_DMA_MISC			0x39864
 #define REG_DMA_MISC_INT_AUTO_CLEAR     BIT(2)
+#define REG_DMA_MISC_DISABLE_AUTO_CLEAR	BIT(17)
 
 #define REG_INMAIL_DATA			0x39900