@@ -37,6 +37,7 @@
#include "core.h"
#include "gadget.h"
#include "io.h"
+#include "../host/xhci.h"
#include "debug.h"
@@ -1750,6 +1751,65 @@ static struct extcon_dev *dwc3_get_extcon(struct dwc3 *dwc)
return edev;
}
+static int dwc3_read_port_info(struct dwc3 *dwc, struct resource *res)
+{
+ void __iomem *regs;
+ struct resource dwc_res;
+ u32 offset;
+ u32 temp;
+ u8 major_revision;
+ int ret = 0;
+
+ /*
+ * Remap xHCI address space to access XHCI ext cap regs,
+ * since it is needed to get port info.
+ */
+ dwc_res = *res;
+ dwc_res.start += 0;
+ dwc_res.end = dwc->xhci_resources[0].start +
+ DWC3_XHCI_REGS_END;
+
+ regs = ioremap(dwc_res.start, resource_size(&dwc_res));
+ if (IS_ERR(regs))
+ return PTR_ERR(regs);
+
+ offset = xhci_find_next_ext_cap(regs, 0,
+ XHCI_EXT_CAPS_PROTOCOL);
+ while (offset) {
+ temp = readl(regs + offset);
+ major_revision = XHCI_EXT_PORT_MAJOR(temp);
+
+ temp = readl(regs + offset + 0x08);
+ if (major_revision == 0x03) {
+ dwc->num_ss_ports += XHCI_EXT_PORT_COUNT(temp);
+ } else if (major_revision <= 0x02) {
+ dwc->num_ports += XHCI_EXT_PORT_COUNT(temp);
+ } else {
+ dev_err(dwc->dev, "port revision seems wrong\n");
+ ret = -EINVAL;
+ goto unmap_reg;
+ }
+
+ offset = xhci_find_next_ext_cap(regs, offset,
+ XHCI_EXT_CAPS_PROTOCOL);
+ }
+
+ temp = readl(regs + DWC3_XHCI_HCSPARAMS1);
+ if (HCS_MAX_PORTS(temp) != (dwc->num_ss_ports + dwc->num_ports)) {
+ dev_err(dwc->dev, "inconsistency in port info\n");
+ ret = -EINVAL;
+ goto unmap_reg;
+ }
+
+ dev_info(dwc->dev,
+ "num-ports: %d ss-capable: %d\n", dwc->num_ports, dwc->num_ss_ports);
+
+unmap_reg:
+ iounmap(regs);
+ return ret;
+}
+
static int dwc3_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
@@ -1757,6 +1817,7 @@ static int dwc3_probe(struct platform_device *pdev)
struct dwc3 *dwc;
int ret;
+ unsigned int hw_mode;
void __iomem *regs;
@@ -1880,6 +1941,20 @@ static int dwc3_probe(struct platform_device *pdev)
goto disable_clks;
}
+ /*
+ * Currently DWC3 controllers that are host-only capable
+ * support Multiport.
+ */
+ hw_mode = DWC3_GHWPARAMS0_MODE(dwc->hwparams.hwparams0);
+ if (hw_mode == DWC3_GHWPARAMS0_MODE_HOST) {
+ ret = dwc3_read_port_info(dwc, res);
+ if (ret)
+ goto disable_clks;
+ } else {
+ dwc->num_ports = 1;
+ dwc->num_ss_ports = 1;
+ }
+
spin_lock_init(&dwc->lock);
mutex_init(&dwc->mutex);
@@ -35,6 +35,9 @@
#define DWC3_MSG_MAX 500
+/* XHCI Reg constants */
+#define DWC3_XHCI_HCSPARAMS1 0x04
+
/* Global constants */
#define DWC3_PULL_UP_TIMEOUT 500 /* ms */
#define DWC3_BOUNCE_SIZE 1024 /* size of a superspeed bulk */
@@ -1023,6 +1026,10 @@ struct dwc3_scratchpad_array {
* @usb_psy: pointer to power supply interface.
* @usb2_phy: pointer to USB2 PHY
* @usb3_phy: pointer to USB3 PHY
+ * @num_ports: Indicates the number of physical USB ports present on HW
+ * presuming each port is at least HS capable
+ * @num_ss_ports: Indicates the number of USB ports present on HW that are
+ * SS Capable
* @usb2_generic_phy: pointer to USB2 PHY
* @usb3_generic_phy: pointer to USB3 PHY
* @phys_ready: flag to indicate that PHYs are ready
@@ -1158,6 +1165,8 @@ struct dwc3 {
struct usb_phy *usb2_phy;
struct usb_phy *usb3_phy;
+ u32 num_ports;
+ u32 num_ss_ports;
struct phy *usb2_generic_phy;
struct phy *usb3_generic_phy;
Currently host-only capable DWC3 controllers support Multiport. Temporarily map XHCI address space for host-only controllers and parse XHCI Extended Capabilities registers to read number of physical usb ports connected to the multiport controller (presuming each port is at least HS capable) and extract info on how many of these ports are Super Speed capable. Signed-off-by: Krishna Kurapati <quic_kriskura@quicinc.com> --- drivers/usb/dwc3/core.c | 75 +++++++++++++++++++++++++++++++++++++++++ drivers/usb/dwc3/core.h | 9 +++++ 2 files changed, 84 insertions(+)