diff mbox series

[v4,3/3] i2c: mpc: Use i2c-scl-clk-low-timeout-ms i2c property

Message ID 20230314215612.23741-4-andi.shyti@kernel.org
State Superseded
Headers show
Series None | expand

Commit Message

Andi Shyti March 14, 2023, 9:56 p.m. UTC
"fsl,timeout" is marked as deprecated and replaced by the
"i2c-scl-clk-low-timeout-us" i2c property.

Use this latter and, in case it is missing, for back
compatibility, check whether we still have "fsl,timeout" defined.

Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Reviewed-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Tested-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
---
 drivers/i2c/busses/i2c-mpc.c | 12 +++++++++++-
 1 file changed, 11 insertions(+), 1 deletion(-)

Comments

Krzysztof Kozlowski March 17, 2023, 9:25 a.m. UTC | #1
On 14/03/2023 22:56, Andi Shyti wrote:
> "fsl,timeout" is marked as deprecated and replaced by the
> "i2c-scl-clk-low-timeout-us" i2c property.
> 
> Use this latter and, in case it is missing, for back
> compatibility, check whether we still have "fsl,timeout" defined.
> 
> Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
> Reviewed-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
> Tested-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
> ---


Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

Best regards,
Krzysztof
diff mbox series

Patch

diff --git a/drivers/i2c/busses/i2c-mpc.c b/drivers/i2c/busses/i2c-mpc.c
index 87e5c1725750f..e8798f9c23fcc 100644
--- a/drivers/i2c/busses/i2c-mpc.c
+++ b/drivers/i2c/busses/i2c-mpc.c
@@ -843,8 +843,18 @@  static int fsl_i2c_probe(struct platform_device *op)
 			mpc_i2c_setup_8xxx(op->dev.of_node, i2c, clock);
 	}
 
+	/*
+	 * "fsl,timeout" has been marked as deprecated and, to maintain
+	 * backward compatibility, we will only look for it if
+	 * "i2c-scl-clk-low-timeout-ms" is not present.
+	 */
 	result = of_property_read_u32(op->dev.of_node,
-				      "fsl,timeout", &mpc_ops.timeout);
+				      "i2c-scl-clk-low-timeout-us",
+				      &mpc_ops.timeout);
+	if (result == -EINVAL)
+		result = of_property_read_u32(op->dev.of_node,
+					      "fsl,timeout", &mpc_ops.timeout);
+
 	if (!result) {
 		mpc_ops.timeout *= HZ / 1000000;
 		if (mpc_ops.timeout < 5)