@@ -764,6 +764,28 @@ spmi_bus: spmi@1c40000 {
#interrupt-cells = <4>;
};
+ tsens0: thermal-sensor@4411000 {
+ compatible = "qcom,sm6375-tsens", "qcom,tsens-v2";
+ reg = <0 0x04411000 0 0x140>, /* TM */
+ <0 0x04410000 0 0x20>; /* SROT */
+ interrupts = <GIC_SPI 275 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "uplow", "critical";
+ #thermal-sensor-cells = <1>;
+ #qcom,sensors = <15>;
+ };
+
+ tsens1: thermal-sensor@4413000 {
+ compatible = "qcom,sm6375-tsens", "qcom,tsens-v2";
+ reg = <0 0x04413000 0 0x140>, /* TM */
+ <0 0x04412000 0 0x20>; /* SROT */
+ interrupts = <GIC_SPI 293 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "uplow", "critical";
+ #thermal-sensor-cells = <1>;
+ #qcom,sensors = <11>;
+ };
+
rpm_msg_ram: sram@45f0000 {
compatible = "qcom,rpm-msg-ram";
reg = <0 0x045f0000 0 0x7000>;
Add nodes for the two TSENS v2.8.0 controllers present on the SoC. Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> --- arch/arm64/boot/dts/qcom/sm6375.dtsi | 22 ++++++++++++++++++++++ 1 file changed, 22 insertions(+)