@@ -132,6 +132,19 @@ static bool have_full_constraints(void)
return has_full_constraints || of_have_populated_dt();
}
+static bool regulator_ops_is_valid(struct regulator_dev *rdev, int ops)
+{
+ if (!rdev->constraints) {
+ rdev_err(rdev, "no constraints\n");
+ return false;
+ }
+
+ if (rdev->constraints->valid_ops_mask & ops)
+ return true;
+
+ return false;
+}
+
static inline struct regulator_dev *rdev_get_supply(struct regulator_dev *rdev)
{
if (rdev && rdev->supply)
@@ -198,28 +211,13 @@ static struct device_node *of_get_regulator(struct device *dev, const char *supp
return regnode;
}
-static int _regulator_can_change_status(struct regulator_dev *rdev)
-{
- if (!rdev->constraints)
- return 0;
-
- if (rdev->constraints->valid_ops_mask & REGULATOR_CHANGE_STATUS)
- return 1;
- else
- return 0;
-}
-
/* Platform voltage constraint check */
static int regulator_check_voltage(struct regulator_dev *rdev,
int *min_uV, int *max_uV)
{
BUG_ON(*min_uV > *max_uV);
- if (!rdev->constraints) {
- rdev_err(rdev, "no constraints\n");
- return -ENODEV;
- }
- if (!(rdev->constraints->valid_ops_mask & REGULATOR_CHANGE_VOLTAGE)) {
+ if (!regulator_ops_is_valid(rdev, REGULATOR_CHANGE_VOLTAGE)) {
rdev_err(rdev, "voltage operation not allowed\n");
return -EPERM;
}
@@ -275,11 +273,7 @@ static int regulator_check_current_limit(struct regulator_dev *rdev,
{
BUG_ON(*min_uA > *max_uA);
- if (!rdev->constraints) {
- rdev_err(rdev, "no constraints\n");
- return -ENODEV;
- }
- if (!(rdev->constraints->valid_ops_mask & REGULATOR_CHANGE_CURRENT)) {
+ if (!regulator_ops_is_valid(rdev, REGULATOR_CHANGE_CURRENT)) {
rdev_err(rdev, "current operation not allowed\n");
return -EPERM;
}
@@ -312,11 +306,7 @@ static int regulator_mode_constrain(struct regulator_dev *rdev, int *mode)
return -EINVAL;
}
- if (!rdev->constraints) {
- rdev_err(rdev, "no constraints\n");
- return -ENODEV;
- }
- if (!(rdev->constraints->valid_ops_mask & REGULATOR_CHANGE_MODE)) {
+ if (!regulator_ops_is_valid(rdev, REGULATOR_CHANGE_MODE)) {
rdev_err(rdev, "mode operation not allowed\n");
return -EPERM;
}
@@ -333,20 +323,6 @@ static int regulator_mode_constrain(struct regulator_dev *rdev, int *mode)
return -EINVAL;
}
-/* dynamic regulator mode switching constraint check */
-static int regulator_check_drms(struct regulator_dev *rdev)
-{
- if (!rdev->constraints) {
- rdev_err(rdev, "no constraints\n");
- return -ENODEV;
- }
- if (!(rdev->constraints->valid_ops_mask & REGULATOR_CHANGE_DRMS)) {
- rdev_dbg(rdev, "drms operation not allowed\n");
- return -EPERM;
- }
- return 0;
-}
-
static ssize_t regulator_uV_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
@@ -692,8 +668,7 @@ static int drms_uA_update(struct regulator_dev *rdev)
* first check to see if we can set modes at all, otherwise just
* tell the consumer everything is OK.
*/
- err = regulator_check_drms(rdev);
- if (err < 0)
+ if (!regulator_ops_is_valid(rdev, REGULATOR_CHANGE_DRMS))
return 0;
if (!rdev->desc->ops->get_optimum_mode &&
@@ -893,7 +868,7 @@ static void print_constraints(struct regulator_dev *rdev)
rdev_dbg(rdev, "%s\n", buf);
if ((constraints->min_uV != constraints->max_uV) &&
- !(constraints->valid_ops_mask & REGULATOR_CHANGE_VOLTAGE))
+ !regulator_ops_is_valid(rdev, REGULATOR_CHANGE_VOLTAGE))
rdev_warn(rdev,
"Voltage range but no REGULATOR_CHANGE_VOLTAGE\n");
}
@@ -1334,7 +1309,7 @@ static struct regulator *create_regulator(struct regulator_dev *rdev,
* it is then we don't need to do nearly so much work for
* enable/disable calls.
*/
- if (!_regulator_can_change_status(rdev) &&
+ if (!regulator_ops_is_valid(rdev, REGULATOR_CHANGE_STATUS) &&
_regulator_is_enabled(rdev))
regulator->always_on = true;
@@ -2111,15 +2086,15 @@ static int _regulator_enable(struct regulator_dev *rdev)
lockdep_assert_held_once(&rdev->mutex);
/* check voltage and requested load before enabling */
- if (rdev->constraints &&
- (rdev->constraints->valid_ops_mask & REGULATOR_CHANGE_DRMS))
+ if (regulator_ops_is_valid(rdev, REGULATOR_CHANGE_DRMS))
drms_uA_update(rdev);
if (rdev->use_count == 0) {
/* The regulator may on if it's not switchable or left on */
ret = _regulator_is_enabled(rdev);
if (ret == -EINVAL || ret == 0) {
- if (!_regulator_can_change_status(rdev))
+ if (!regulator_ops_is_valid(rdev,
+ REGULATOR_CHANGE_STATUS))
return -EPERM;
ret = _regulator_do_enable(rdev);
@@ -2221,7 +2196,7 @@ static int _regulator_disable(struct regulator_dev *rdev)
(rdev->constraints && !rdev->constraints->always_on)) {
/* we are last user */
- if (_regulator_can_change_status(rdev)) {
+ if (regulator_ops_is_valid(rdev, REGULATOR_CHANGE_STATUS)) {
ret = _notifier_call_chain(rdev,
REGULATOR_EVENT_PRE_DISABLE,
NULL);
@@ -2242,10 +2217,7 @@ static int _regulator_disable(struct regulator_dev *rdev)
rdev->use_count = 0;
} else if (rdev->use_count > 1) {
-
- if (rdev->constraints &&
- (rdev->constraints->valid_ops_mask &
- REGULATOR_CHANGE_DRMS))
+ if (regulator_ops_is_valid(rdev, REGULATOR_CHANGE_DRMS))
drms_uA_update(rdev);
rdev->use_count--;
@@ -2489,8 +2461,7 @@ int regulator_can_change_voltage(struct regulator *regulator)
{
struct regulator_dev *rdev = regulator->rdev;
- if (rdev->constraints &&
- (rdev->constraints->valid_ops_mask & REGULATOR_CHANGE_VOLTAGE)) {
+ if (regulator_ops_is_valid(rdev, REGULATOR_CHANGE_VOLTAGE)) {
if (rdev->desc->n_voltages - rdev->desc->linear_min_sel > 1)
return 1;
@@ -2644,7 +2615,7 @@ int regulator_is_supported_voltage(struct regulator *regulator,
int i, voltages, ret;
/* If we can't change voltage check the current voltage */
- if (!(rdev->constraints->valid_ops_mask & REGULATOR_CHANGE_VOLTAGE)) {
+ if (!regulator_ops_is_valid(rdev, REGULATOR_CHANGE_VOLTAGE)) {
ret = regulator_get_voltage(regulator);
if (ret >= 0)
return min_uV <= ret && ret <= max_uV;
@@ -2850,7 +2821,7 @@ static int regulator_set_voltage_unlocked(struct regulator *regulator,
* return successfully even though the regulator does not support
* changing the voltage.
*/
- if (!(rdev->constraints->valid_ops_mask & REGULATOR_CHANGE_VOLTAGE)) {
+ if (!regulator_ops_is_valid(rdev, REGULATOR_CHANGE_VOLTAGE)) {
current_uV = _regulator_get_voltage(rdev);
if (min_uV <= current_uV && current_uV <= max_uV) {
regulator->min_uV = min_uV;
@@ -3365,8 +3336,7 @@ int regulator_allow_bypass(struct regulator *regulator, bool enable)
if (!rdev->desc->ops->set_bypass)
return 0;
- if (rdev->constraints &&
- !(rdev->constraints->valid_ops_mask & REGULATOR_CHANGE_BYPASS))
+ if (!regulator_ops_is_valid(rdev, REGULATOR_CHANGE_BYPASS))
return 0;
mutex_lock(&rdev->mutex);
@@ -4386,7 +4356,7 @@ static int __init regulator_late_cleanup(struct device *dev, void *data)
if (c && c->always_on)
return 0;
- if (c && !(c->valid_ops_mask & REGULATOR_CHANGE_STATUS))
+ if (!regulator_ops_is_valid(rdev, REGULATOR_CHANGE_STATUS))
return 0;
mutex_lock(&rdev->mutex);
To make the code more compat and centralized, this patch add a unified function - regulator_ops_is_valid. So we can add some extra checking code easily later. Signed-off-by: WEN Pingbo <pingbo.wen@linaro.org> --- drivers/regulator/core.c | 88 ++++++++++++++++-------------------------------- 1 file changed, 29 insertions(+), 59 deletions(-) -- 1.9.1