@@ -66,11 +66,10 @@ static int mxs_ocotp_wait(struct mxs_ocotp *otp)
return 0;
}
-static int mxs_ocotp_read(void *context, const void *reg, size_t reg_size,
- void *val, size_t val_size)
+static int mxs_ocotp_read(void *context, unsigned int offset,
+ void *val, size_t bytes)
{
struct mxs_ocotp *otp = context;
- unsigned int offset = *(u32 *)reg;
u32 *buf = val;
int ret;
@@ -94,17 +93,16 @@ static int mxs_ocotp_read(void *context, const void *reg, size_t reg_size,
if (ret)
goto close_banks;
- while (val_size) {
+ while (bytes) {
if ((offset < OCOTP_DATA_OFFSET) || (offset % 16)) {
/* fill up non-data register */
- *buf = 0;
+ *buf++ = 0;
} else {
- *buf = readl(otp->base + offset);
+ *buf++ = readl(otp->base + offset);
}
- buf++;
- val_size--;
- offset += reg_size;
+ bytes -= 4;
+ offset += 4;
}
close_banks:
@@ -117,57 +115,28 @@ disable_clk:
return ret;
}
-static int mxs_ocotp_write(void *context, const void *data, size_t count)
-{
- /* We don't want to support writing */
- return 0;
-}
-
-static bool mxs_ocotp_writeable_reg(struct device *dev, unsigned int reg)
-{
- return false;
-}
-
static struct nvmem_config ocotp_config = {
.name = "mxs-ocotp",
+ .stride = 16,
+ .word_size = 4,
.owner = THIS_MODULE,
};
-static const struct regmap_range imx23_ranges[] = {
- regmap_reg_range(OCOTP_DATA_OFFSET, 0x210),
-};
-
-static const struct regmap_access_table imx23_access = {
- .yes_ranges = imx23_ranges,
- .n_yes_ranges = ARRAY_SIZE(imx23_ranges),
-};
-
-static const struct regmap_range imx28_ranges[] = {
- regmap_reg_range(OCOTP_DATA_OFFSET, 0x290),
-};
-
-static const struct regmap_access_table imx28_access = {
- .yes_ranges = imx28_ranges,
- .n_yes_ranges = ARRAY_SIZE(imx28_ranges),
+struct imx_data {
+ int max_reg;
};
-static struct regmap_bus mxs_ocotp_bus = {
- .read = mxs_ocotp_read,
- .write = mxs_ocotp_write, /* make regmap_init() happy */
- .reg_format_endian_default = REGMAP_ENDIAN_NATIVE,
- .val_format_endian_default = REGMAP_ENDIAN_NATIVE,
+static const struct imx_data imx23_data = {
+ .max_reg = 0x210,
};
-static struct regmap_config mxs_ocotp_config = {
- .reg_bits = 32,
- .val_bits = 32,
- .reg_stride = 16,
- .writeable_reg = mxs_ocotp_writeable_reg,
+static const struct imx_data imx28_data = {
+ .max_reg = 0x290,
};
static const struct of_device_id mxs_ocotp_match[] = {
- { .compatible = "fsl,imx23-ocotp", .data = &imx23_access },
- { .compatible = "fsl,imx28-ocotp", .data = &imx28_access },
+ { .compatible = "fsl,imx23-ocotp", .data = &imx23_data },
+ { .compatible = "fsl,imx28-ocotp", .data = &imx23_data },
{ /* sentinel */},
};
MODULE_DEVICE_TABLE(of, mxs_ocotp_match);
@@ -175,6 +144,7 @@ MODULE_DEVICE_TABLE(of, mxs_ocotp_match);
static int mxs_ocotp_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
+ struct imx_data *data;
struct mxs_ocotp *otp;
struct resource *res;
const struct of_device_id *match;
@@ -205,17 +175,10 @@ static int mxs_ocotp_probe(struct platform_device *pdev)
return ret;
}
- access = match->data;
- mxs_ocotp_config.rd_table = access;
- mxs_ocotp_config.max_register = access->yes_ranges[0].range_max;
-
- regmap = devm_regmap_init(dev, &mxs_ocotp_bus, otp, &mxs_ocotp_config);
- if (IS_ERR(regmap)) {
- dev_err(dev, "regmap init failed\n");
- ret = PTR_ERR(regmap);
- goto err_clk;
- }
+ data = match->data;
+ ocotp_config.size = data->max_reg;
+ ocotp_config.priv = otp;
ocotp_config.dev = dev;
otp->nvmem = nvmem_register(&ocotp_config);
if (IS_ERR(otp->nvmem)) {
This patch moves to nvmem support in the driver to use callback instead of regmap. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> --- drivers/nvmem/mxs-ocotp.c | 79 +++++++++++++---------------------------------- 1 file changed, 21 insertions(+), 58 deletions(-) -- 2.5.0